From 2807d24d10772190f39e87d56cef207dfeb4cc36 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Julian=20Frohm=C3=BCller?= <info@ispillmydrink.de>
Date: Mon, 23 Feb 2026 11:53:46 +0100
Subject: [PATCH] oscscript: remove redundant ata_identify_device script

---
 .../myscripts/ata_identify_device.osc         | 141 ------------------
 1 file changed, 141 deletions(-)
 delete mode 100644 res/oscscripts/myscripts/ata_identify_device.osc

diff --git a/res/oscscripts/myscripts/ata_identify_device.osc b/res/oscscripts/myscripts/ata_identify_device.osc
deleted file mode 100644
index 46decca..0000000
--- a/res/oscscripts/myscripts/ata_identify_device.osc
+++ /dev/null
@@ -1,141 +0,0 @@
-seti $printhelp = $printhelp
-seti $help = $help
-if $help = 1
-  echo 'This will send the identify device command to the drive and display the raw results.'
-  echo 'It will also display some of the drive capabilities and status.'
-  echo 'A value of 0 = not supported or not enabled.'
-  echo 'A value of 1 = supported or enabled.'
-  echo 'Example: opensuperclone --tool -t /dev/sda -f ata_identify_device'
-  if $printhelp = 1
-    exit 0
-  endif
-  echo 'Hit ENTER to continue...'
-  userinput $choicestring
-  previousscript
-endif
-
-include good_subroutines.osc
-
-
-buffersize 512
-setreadpio
-gettime
-seti $starttime = $time
-ata28cmd 0 0 0 0 0 0xa0 0xec
-gettime
-seti $endtime = $time
-
-# check if command failed
-seti $command_failed = 0
-gosub check_command_status
-if $command_failed = 1
-  echo "Command failed!"
-  gosub show_sense_data
-  gosub show_ata_return_status
-  previousscript
-endif
-
-seti $commandtime = $endtime - $starttime
-echo "Command time: " $commandtime
-
-echo "Raw buffer:"
-printbuffer 0 512
-
-# show model and serial
-wordflipbuffer 0 512
-sets $model = buffer 54 40
-echo "Model= " $model
-sets $serial = buffer 20 20
-echo "Serial= " $serial
-sets $firmware = buffer 46 8
-echo "Firmware revision= " $firmware
-wordflipbuffer 0 512
-
-# show if drive supports extended commands
-seti $tempnum = buffer 167
-seti $extended = $tempnum & 4
-seti $extended = $extended > 2
-echo "supports 48 bit commands = " $extended
-
-# total addressable sectors
-if $extended = 1
-  seti $addressable = buffer 200 qw
-  echo "total addressable sectors= " $addressable
-else
-  seti $addressable = buffer 120 dw
-  echo "total addressable sectors= " $addressable
-endif
-
-# words per logical sector
-seti $wordsps = buffer 234 w
-echo "words per logical sector= " $wordsps
-
-# size
-if $wordsps = 0
-  seti $sectorsize = 512
-else
-  seti $sectorsize = $wordsps * 2
-endif
-seti $sizeb = $addressable * $sectorsize
-seti $sizemb = $sizeb / 1048576
-echo "Size in bytes= " $sizeb
-echo "Size in MiB= " $sizemb
-
-# logical sectors per physical sector
-seti $tempnum = buffer 212
-seti $logical = $tempnum & 8
-echo "logical sectors per physical sector(2^x)= " $tempnum
-
-# show drive security status
-seti $tempnum = buffer 257
-seti $security_level = $tempnum & 1
-seti $tempnum = buffer 256
-seti $enhanced_security_erase_supported = $tempnum & 32
-seti $enhanced_security_erase_supported = $enhanced_security_erase_supported > 5
-seti $security_count_expired = $tempnum & 16
-seti $security_count_expired = $security_count_expired > 4
-seti $security_frozen = $tempnum & 8
-seti $security_frozen = $security_frozen > 3
-seti $security_locked = $tempnum & 4
-seti $security_locked = $security_locked > 2
-seti $security_enabled = $tempnum & 2
-seti $security_enabled = $security_enabled > 1
-seti $security_supported = $tempnum & 1
-echo "enhanced_security_erase_supported= " $enhanced_security_erase_supported
-echo "security_count_expired= " $security_count_expired
-echo "security_frozen= " $security_frozen
-echo "security_locked= " $security_locked
-echo "security_enabled= " $security_enabled
-echo "security_supported= " $security_supported
-
-# show a couple extended SCT capabilities
-seti $tempnum = buffer 412
-seti $error_recovery_control = $tempnum & 8
-seti $error_recovery_control = $error_recovery_control > 3
-seti $long_sector_access = $tempnum & 2
-seti $long_sector_access = $long_sector_access > 1
-echo "error_recovery_control= " $error_recovery_control
-echo "long_sector_access =" $long_sector_access
-
-# show read ahead status
-seti $tempnum = buffer 164
-seti $look_ahead_supported = $tempnum & 0x40
-seti $look_ahead_supported = $look_ahead_supported > 6
-seti $tempnum = buffer 170
-seti $look_ahead_status = $tempnum & 0x40
-seti $look_ahead_status = $look_ahead_status > 6
-echo "drive look ahead supported= " $look_ahead_supported
-echo "drive look ahead status= " $look_ahead_status
-
-# show other abilities
-seti $tempnum = buffer 240
-seti $write_uncorrectable = $tempnum & 4
-seti $write_uncorrectable = $write_uncorrectable > 2
-echo "write_uncorrectable supported= " $write_uncorrectable
-
-previousscript
-end
-
-
-
-