seti $printhelp = $printhelp
seti $help = $help
if $help = 1
  echo 'This will read the smart data from the drive and display the results.'
  echo 'Example: opensuperclone --tool -t /dev/sda -f ata_smart_data'
  if $printhelp = 1
    exit 0
  endif
  echo 'Hit ENTER to continue...'
  userinput $choicestring
  previousscript
endif

include good_subroutines.osc


buffersize 512
setreadpio

# read threshold data
clearbuffer
ata28cmd 0xd1 0 0 0x4f 0xc2 0xa0 0xb0
seti $threshold_success = 1
# check if command failed
seti $command_failed = 0
gosub check_command_status
if $command_failed = 1
  seti $threshold_success = 0
endif

#echo "Raw buffer:"
#printbuffer 0 512
copybuffertoscratchpad 0 0 512

# read attribute data
clearbuffer
ata28cmd 0xd0 0 0 0x4f 0xc2 0xa0 0xb0

# check if command failed
gosub status_check

#echo "Raw buffer:"
#printbuffer 0 512


seti $version = buffer 0 w
echo "Smart structure version= " $version

echo "ID#   FLAG  VALUE WORST THRESH   RAW DATA          ATTRIBUTE NAME"
sets $attribute_name = " "
seti $offset = 2
seti $count = 0
seti $warning = 0
while $count < 30
  seti $attribute_id = buffer $offset
  seti $offset = $offset + 1
  if $attribute_id < 10
    sets $spaces = "  "
  elseif $attribute_id < 100
    sets $spaces = " "
  else
    sets $spaces = ""
  endif
  sets $attributestring = $spaces $attribute_id

  seti $flags = buffer $offset w
  seti $offset = $offset + 2
  if $flags < 0x10
    sets $zeros = "0x000"
  elseif $flags < 0x100
    sets $zeros = "0x00"
  elseif $flags < 0x1000
    sets $zeros = "0x0"
  else
    sets $zeros = "0x"
  endif
  hex
  sets $flagstring = $zeros $flags
  decimal

  seti $current_value = buffer $offset
  seti $offset = $offset + 1
  if $current_value < 10
    sets $spaces = "  "
  elseif $current_value < 100
    sets $spaces = " "
  else
    sets $spaces = ""
  endif
  sets $currentstring = $spaces $current_value

  seti $worst_value = buffer $offset
  seti $offset = $offset + 1
  if $worst_value < 10
    sets $spaces = "  "
  elseif $worst_value < 100
    sets $spaces = " "
  else
    sets $spaces = ""
  endif
  sets $worststring = $spaces $worst_value

  seti $rawdata = buffer $offset dw
  seti $offset = $offset + 4
  seti $otherdata = buffer $offset w
  seti $offset = $offset + 2
  seti $otherdata = $otherdata < 32
  seti $rawdata = $rawdata + $otherdata
  seti $otherdata = buffer $offset
  seti $offset = $offset + 1
  seti $otherdata = $otherdata < 48
  seti $rawdata = $rawdata + $otherdata

  if $rawdata < 0x10
    sets $zeros = "0x0000000000000"
  elseif $rawdata < 0x100
    sets $zeros = "0x000000000000"
  elseif $rawdata < 0x1000
    sets $zeros = "0x00000000000"
  elseif $rawdata < 0x10000
    sets $zeros = "0x0000000000"
  elseif $rawdata < 0x100000
    sets $zeros = "0x000000000"
  elseif $rawdata < 0x1000000
    sets $zeros = "0x00000000"
  elseif $rawdata < 0x10000000
    sets $zeros = "0x0000000"
  elseif $rawdata < 0x100000000
    sets $zeros = "0x000000"
  elseif $rawdata < 0x1000000000
    sets $zeros = "0x00000"
  elseif $rawdata < 0x10000000000
    sets $zeros = "0x0000"
  elseif $rawdata < 0x100000000000
    sets $zeros = "0x000"
  elseif $rawdata < 0x1000000000000
    sets $zeros = "0x00"
  elseif $rawdata < 0x10000000000000
    sets $zeros = "0x0"
  else
    sets $zeros = "0x"
  endif
  hex
  sets $datastring = $zeros $rawdata
  decimal

  seti $threshold = 0
  seti $threshold_value = $threshold
  if $threshold_success = 1
    gosub get_threshold_data
    seti $threshold = $threshold_value
    sets $threshold_warning = " "
    if $attribute_id > 0
      if $current_value <= $threshold
        seti $warning = 1
        sets $threshold_warning = "*"
      elseif $worst_value <= $threshold
        seti $warning = 1
        sets $threshold_warning = "*"
      endif
    endif
  endif
  if $threshold < 10
    sets $spaces = "  "
  elseif $threshold < 100
    sets $spaces = " "
  else
    sets $spaces = ""
  endif
  sets $thresholdstring = $spaces $threshold_warning $threshold

  if $attribute_id > 0
    gosub get_attribute_name
    echo $attributestring "  " $flagstring "  " $currentstring "   " $worststring "  " $thresholdstring "   " $datastring "   " $attribute_name
  endif

  seti $count = $count + 1
done

if $warning > 0
  echo "Warning! One or more of the values has hit its threshold."
endif

previousscript


subroutine get_threshold_data
  seti $t_offset = 2
  seti $t_count = 0
  while $t_count < 30
    seti $threshold_id = scratchpad $t_offset
    seti $t_offset = $t_offset + 1

    if $threshold_id = $attribute_id
      seti $threshold_value = scratchpad $t_offset
      break
    endif

    seti $t_offset = $t_offset + 11
    seti $t_count = $t_count + 1
  done
endsubroutine


subroutine get_attribute_name
  if $attribute_id = 1
    sets $attribute_name = "Read Error Rate"
  elseif $attribute_id = 2
    sets $attribute_name = "Throughput Performance"
  elseif $attribute_id = 3
    sets $attribute_name = "Spin-Up Time"
  elseif $attribute_id = 4
    sets $attribute_name = "Start/Stop Count"
  elseif $attribute_id = 5
    sets $attribute_name = "Reallocated Sectors Count"
  elseif $attribute_id = 6
    sets $attribute_name = "Read Channel Margin"
  elseif $attribute_id = 7
    sets $attribute_name = "Seek Error Rate"
  elseif $attribute_id = 8
    sets $attribute_name = "Seek Time Performance"
  elseif $attribute_id = 9
    sets $attribute_name = "Power-On Hours Count"
  elseif $attribute_id = 10
    sets $attribute_name = "Spin Retry Count"
  elseif $attribute_id = 11
    sets $attribute_name = "Calibration Retries"
  elseif $attribute_id = 12
    sets $attribute_name = "Power Cycle Count"
  elseif $attribute_id = 13
    sets $attribute_name = "Soft Read Error Rate"
  elseif $attribute_id = 100
    sets $attribute_name = "Erase/Program Cycles"
  elseif $attribute_id = 103
    sets $attribute_name = "Translation Table Rebuild"
  elseif $attribute_id = 166
    sets $attribute_name = "Min W/E Cycle"
  elseif $attribute_id = 167
    sets $attribute_name = "Min Bad Block/Die"
  elseif $attribute_id = 168
    sets $attribute_name = "Maximum Erase Cycle"
  elseif $attribute_id = 169
    sets $attribute_name = "Total Bad Block"
  elseif $attribute_id = 170
    sets $attribute_name = "Reserved Block Count"
  elseif $attribute_id = 171
    sets $attribute_name = "Program Fail Count"
  elseif $attribute_id = 172
    sets $attribute_name = "Erase Fail Count"
  elseif $attribute_id = 173
    sets $attribute_name = "Wear Leveller Worst Case Erase Count"
  elseif $attribute_id = 174
    sets $attribute_name = "Unexpected Power Loss"
  elseif $attribute_id = 175
    sets $attribute_name = "Program Fail Count"
  elseif $attribute_id = 176
    sets $attribute_name = "Erase Fail Count"
  elseif $attribute_id = 177
    sets $attribute_name = "Wear Leveling Count"
  elseif $attribute_id = 178
    sets $attribute_name = "Used Reserved Block Count"
  elseif $attribute_id = 179
    sets $attribute_name = "Used Reserved Block Count"
  elseif $attribute_id = 180
    sets $attribute_name = "Unused Reserved Block Count"
  elseif $attribute_id = 181
    sets $attribute_name = "Program Fail Count"
  elseif $attribute_id = 182
    sets $attribute_name = "Erase Fail Count"
  elseif $attribute_id = 183
    sets $attribute_name = "SATA Downshifts"
  elseif $attribute_id = 184
    sets $attribute_name = "End-to-End error"
  elseif $attribute_id = 185
    sets $attribute_name = "Head Stability"
  elseif $attribute_id = 186
    sets $attribute_name = "Induced Op-Vibration Detection"
  elseif $attribute_id = 187
    sets $attribute_name = "Reported Uncorrectable Errors"
  elseif $attribute_id = 188
    sets $attribute_name = "Command Timeout"
  elseif $attribute_id = 189
    sets $attribute_name = "High Fly Writes"
  elseif $attribute_id = 190
    sets $attribute_name = "Temperature"
  elseif $attribute_id = 191
    sets $attribute_name = "G-Sense Errors"
  elseif $attribute_id = 192
    sets $attribute_name = "Power-Off Retract Cycles"
  elseif $attribute_id = 193
    sets $attribute_name = "Load/Unload Cycles"
  elseif $attribute_id = 194
    sets $attribute_name = "Temperature"
  elseif $attribute_id = 195
    sets $attribute_name = "Hardware ECC Recovered"
  elseif $attribute_id = 196
    sets $attribute_name = "Reallocation Events"
  elseif $attribute_id = 197
    sets $attribute_name = "Current Pending Sectors"
  elseif $attribute_id = 198
    sets $attribute_name = "Off-line Uncorrectable"
  elseif $attribute_id = 199
    sets $attribute_name = "UDMA CRC Error Rate"
  elseif $attribute_id = 200
    sets $attribute_name = "Write Error Rate"
  elseif $attribute_id = 201
    sets $attribute_name = "Soft Read Errors"
  elseif $attribute_id = 202
    sets $attribute_name = "Data Address Mark Errors"
  elseif $attribute_id = 203
    sets $attribute_name = "Run Out Cancel"
  elseif $attribute_id = 204
    sets $attribute_name = "Soft ECC Corrections"
  elseif $attribute_id = 205
    sets $attribute_name = "Thermal Asperity Rate"
  elseif $attribute_id = 206
    sets $attribute_name = "Flying Height"
  elseif $attribute_id = 207
    sets $attribute_name = "Spin High Current"
  elseif $attribute_id = 208
    sets $attribute_name = "Spin Buzz"
  elseif $attribute_id = 209
    sets $attribute_name = "Offline Seek Performance"
  elseif $attribute_id = 210
    sets $attribute_name = "Vibration During Write"
  elseif $attribute_id = 211
    sets $attribute_name = "Vibration During Write"
  elseif $attribute_id = 212
    sets $attribute_name = "Shock During Write"
  elseif $attribute_id = 220
    sets $attribute_name = "Disk Shift"
  elseif $attribute_id = 221
    sets $attribute_name = "G-Sense Error Rate"
  elseif $attribute_id = 222
    sets $attribute_name = "Loaded Hours"
  elseif $attribute_id = 223
    sets $attribute_name = "Load/Unload Retries"
  elseif $attribute_id = 224
    sets $attribute_name = "Load Friction"
  elseif $attribute_id = 225
    sets $attribute_name = "Load/Unload Cycles"
  elseif $attribute_id = 226
    sets $attribute_name = "Load-in Time"
  elseif $attribute_id = 227
    sets $attribute_name = "Torque Amplification Count"
  elseif $attribute_id = 228
    sets $attribute_name = "Power-Off Retracts"
  elseif $attribute_id = 230
    sets $attribute_name = "GMR Head Amplitude"
  elseif $attribute_id = 231
    sets $attribute_name = "Temperature"
  elseif $attribute_id = 232
    sets $attribute_name = "Available Reserved Space"
  elseif $attribute_id = 233
    sets $attribute_name = "Media Wearout Indicator"
  elseif $attribute_id = 234
    sets $attribute_name = "Average/Maximum Erase Count"
  elseif $attribute_id = 235
    sets $attribute_name = "Good/System(Free) Block Count"
  elseif $attribute_id = 240
    sets $attribute_name = "Head Flying Hours"
  elseif $attribute_id = 241
    sets $attribute_name = "Total LBAs Written"
  elseif $attribute_id = 242
    sets $attribute_name = "Total LBAs Read"
  elseif $attribute_id = 249
    sets $attribute_name = "NAND_Writes_1GiB"
  elseif $attribute_id = 250
    sets $attribute_name = "Read Error Retry Rate"
  elseif $attribute_id = 254
    sets $attribute_name = "Free Fall Protection"

  else
    sets $attribute_name = "Unknown"
  endif
endsubroutine


end