OpenSuperClone/res/oscscripts/ata_sct_readlong

seti $printhelp = $printhelp
seti $help = $help
if $help = 1
  echo 'Perform an SCT read long command if supported.'
  echo 'This command requires the number variable "sector" to be set on the command line.'
  echo 'This also requires the string variable "file" to be set.'
  echo '"file" is the name of the file the data will be written to.'
  echo 'Note that even if this command is supported, it may still be of no value.'
  echo 'The ATA documentation states that the data returned may be encoded.'
  echo 'And my experience so far is that the data is usually encoded and totally useless.'
  echo "So don't get your hopes up about using this command to get any worthwhile data."
  echo 'It is mainly a demonstration of using the SCT commands.'
  echo 'Example: hddsupertool -t /dev/sdb -f ata48_sct_readlong sector=100 file=="sector100.bin'
  if $printhelp = 1
    exit 0
  endif
  echo 'Hit ENTER to continue...'
  userinput $choicestring
  previousscript
endif

include good_subroutines

# set a blank string variable to compare with user input
# make sure not to set this anyplace else
sets $null = ""


# set this to itself for use with the menu system
# make sure not to set this anyplace else
# if it was not previously set it will = 0
seti $using_menu = $using_menu


# find out if using menus or if variables were set on the command line, and ask for input if they were not set

seti $ask = 0
while 1 = 1
  variablecheck $sector
  if $error_level < 16
    seti $ask = 1
  elseif $using_menu = 1
    seti $ask = 1
  endif
  if $ask = 1
    echo "Enter starting sector:"
    userinput $choicestring
    if $choicestring != $null
      seti $sector = $choicestring 0
      break
    else
      echo "Choice cannot be blank!"
    endif
  else
    break
  endif
done

seti $ask = 0
variablecheck $file
if $error_level < 16
  seti $ask = 1
elseif $using_menu = 1
  seti $ask = 1
endif
if $ask = 1
  echo "Enter file name, or leave blank to show data on screen:"
  userinput $choicestring
  sets $file = $choicestring
endif


# set the sector bytes for use in the sct command
seti $lba0 = $sector & 0xff
seti $lba1 = $sector > 8
seti $lba1 = $lba1 & 0xff
seti $lba2 = $sector > 16
seti $lba2 = $lba2 & 0xff
seti $lba3 = $sector > 24
seti $lba3 = $lba3 & 0xff
seti $lba4 = $sector > 32
seti $lba4 = $lba4 & 0xff
seti $lba5 = $sector > 40
seti $lba5 = $lba5 & 0xff
seti $lba6 = $sector > 48
seti $lba6 = $lba6 & 0xff
seti $lba7 = $sector > 56
seti $lba7 = $lba7 & 0xff

# set the buffer size
buffersize 512

# set the LBAs to 0
seti $LBAlow = 0
seti $LBAmid = 0
seti $LBAhigh = 0

# set some things for the ata command
setwritepio
# set features to d6 write smart log
seti $features = 0xd6
# set count to 1
seti $count = 1
# set device to a0
seti $device = 0xa0
# set lba to log page e0
seti $LBAlow = 0x4fe0
seti $LBAmid = 0xc2
# set the command for write log extended
seti $command = 0xb0

# make sure buffer is clear
clearbuffer

# data to set to get ready for read long
# set action code to read/write long
seti $actionlow = 0x01
seti $actionhigh = 0x00
# set function code to read long
seti $functionlow = 0x01
seti $functionhigh = 0x00

# set the buffer data
setbuffer 0
  $actionlow $actionhigh $functionlow $functionhigh $lba0 $lba1 $lba2 $lba3 $lba4 $lba5 $lba6 $lba7
endbuffer

# perform the command
ata48cmd $features $count $LBAhigh $LBAmid $LBAlow $device $command

# check if command failed
seti $command_failed = 0
gosub check_command_status
if $command_failed = 1
  echo "Command failed!"
  gosub show_sense_data
  gosub show_ata_return_status
  previousscript
endif


# now we have to perform a second command to read the data returned
buffersize 1024
clearbuffer
setreadpio
# set the count to 2 pages (1024 bytes)
seti $count = 2
# set lba to log page e1
seti $LBAlow = 0x4fe1
# set the features d5 smart read log
seti $features = 0xd5


# perform the command
ata48cmd $features $count $LBAhigh $LBAmid $LBAlow $device $command

# check if command failed
seti $command_failed = 0
gosub check_command_status
if $command_failed = 1
  echo "Command failed!"
  gosub show_sense_data
  gosub show_ata_return_status
  previousscript
endif


seti $ecc_length = $ata_return_count & 0xff
seti $temp = $ata_return_lba < 8
seti $temp = $temp & 0xff00
seti $ecc_length = $ecc_length + $temp


# show the actual data on the screen or write the data to the file
if $file = $null
  echo "raw sector:"
  printbuffer 0 512
  hex
  echo "reported ecc length = 0x" $ecc_length
  decimal
  echo "ecc data:"
  printbuffer 512 512
else
  writebuffer $file 0 0 $data_transferred
  echo "Data written to file: " $file
endif


previousscript
end