Tagged 1.0.0.

size) under 250%.
Make main window a bit larger.

.svnignore.txt

@@ -8,9 +8,11 @@ config.guess
 config.sub
 aclocal.m4
 config.h.in
+compile
+ar-lib
 missing
 install-sh
 *.glade.cpp
 *.ui.cpp
 *.txt.cpp
-gsmartcontrol.spec
+.kdev4

.update-ignores

@@ -0,0 +1 @@
+svn propset svn:ignore -F .svnignore.txt .

LICENSE_bsd-ac.txt

@@ -0,0 +1,25 @@
+Copyright (c) 2006-2008 Alexander Chemeris
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+
+  2. Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+
+  3. The name of the author may be used to endorse or promote products
+     derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

LICENSE_gsmartcontrol.txt

@@ -18,8 +18,9 @@ If not, see <http://www.gnu.org/licenses/>.
 See LICENSE_gpl2.txt and LICENSE_gpl3.txt for details.
 
 
-All files which don't have any copyright notices, tests and examples are
-covered under the Whatever License. See LICENSE_whatever.txt for details.
+All files which don't have any copyright notices, as well as tests and
+examples are covered under the Unlicense. See LICENSE_unlicense.txt for
+details.
 
 
 Portions of this software are copyright Google Inc. See LICENSE_pcrecpp.txt

LICENSE_hz.txt

@@ -9,14 +9,18 @@ All original code (except for the tests) is licensed under the Zlib License.
 See LICENSE_zlib.txt for details.
 
 
-All tests and examples are covered under the Whatever License. See
-LICENSE_whatever.txt for details.
+All tests and examples are covered under the Unlicense. See
+LICENSE_unlicense.txt for details.
 
 
 Portions of this software are copyright Regents of the University of
 California, see LICENSE_bsd-ucb.txt for details.
 
 
+Portions of this software are copyright Alexander Chemeris, see
+LICENSE_bsd-ac.txt for details.
+
+
 Portions of this software are licensed under Boost Software License, see
 LICENSE_boost_1_0.txt and individual source files for copyright information.
 

LICENSE_pcrecpp.txt

@@ -1,4 +1,4 @@
-Copyright (c) 2005, Google Inc.
+Copyright (c) 2005 - 2010, Google Inc.
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

LICENSE_unlicense.txt

@@ -0,0 +1,25 @@
+
+This is free and unencumbered software released into the public domain.
+
+Anyone is free to copy, modify, publish, use, compile, sell, or
+distribute this software, either in source code form or as a compiled
+binary, for any purpose, commercial or non-commercial, and by any
+means.
+
+In jurisdictions that recognize copyright laws, the author or authors
+of this software dedicate any and all copyright interest in the
+software to the public domain. We make this dedication for the benefit
+of the public at large and to the detriment of our heirs and
+successors. We intend this dedication to be an overt act of
+relinquishment in perpetuity of all present and future rights to this
+software under copyright law.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.
+
+For more information, please refer to <http://unlicense.org/>

Makefile.am

@@ -0,0 +1,231 @@
+
+# Add autoconf.m4 directory to local macro search path
+ACLOCAL_AMFLAGS = -I autoconf.m4
+
+SUBDIRS = data debian.dist src
+
+
+# These files are actually needed for compilation.
+noinst_DATA = AUTHORS.txt LICENSE_gsmartcontrol.txt README.txt
+
+
+# For the files to be bundled with the distribution, specify them in
+# one of the following.
+
+# These will be installed into docdir.
+# Some of these files are actually needed for compilation (see src/res/Makefile.am).
+dist_doc_DATA = AUTHORS.txt ChangeLog NEWS README.txt \
+	LICENSE_boost_1_0.txt \
+	LICENSE_bsd-ac.txt \
+	LICENSE_bsd-ucb.txt \
+	LICENSE_gpl2.txt \
+	LICENSE_gpl3.txt \
+	LICENSE_gsmartcontrol.txt \
+	LICENSE_hz.txt \
+	LICENSE_pcrecpp.txt \
+	LICENSE_unlicense.txt \
+	LICENSE_zlib.txt
+
+
+# nobase_ preserves their directory names.
+nobase_dist_doc_DATA = contrib/cron-based_noadmin/README \
+	contrib/cron-based_noadmin/cron_gather_smart.sh \
+	contrib/cron-based_noadmin/crontab.example \
+	contrib/cron-based_noadmin/smartctl_subst.sh
+
+
+# Extra files bundled with distribution.
+# file2csource.sh is needed for building but not installed.
+EXTRA_DIST = COPYING INSTALL configure autogen.sh \
+	gsmartcontrol.kdev4 \
+	file2csource.sh \
+	gsmartcontrol.spec
+
+
+
+# rpm support
+
+src-rpm: dist
+	rpmbuild -ts $(distdir).tar.bz2
+
+
+# NSIS installer support.
+# Requires installed NSIS, smartctl-nc.exe, smartctl.exe, update-smart-drivedb.exe.
+# Gtkmm dlls and pcre dlls are required if linking against them.
+# dos2unix on build machine.
+# Execute only with win32 build present.
+
+WIN_ZIP_NAME = $(PACKAGE)-$(VERSION)-@WINDOWS_SUFFIX@
+
+
+win-dist: win-dist-nocleanup win-dist-cleanup
+
+win-dist-nocleanup: win-dist-prepare nsis-dist-nocleanup win-zip-dist-nocleanup
+
+win-dist-cleanup: win-zip-dist-cleanup nsis-dist-cleanup
+	rm -rf win-dist
+
+win-dist-clean: win-dist-cleanup
+	rm -f gsmartcontrol-*.exe gsmartcontrol-*.zip
+
+
+win-dist-prepare-all: nsis-dist-prepare win-zip-dist-prepare
+
+
+#	All of GTK+
+GTK_BIN_FILES = gdk-pixbuf-query-loaders.exe \
+	gspawn-win32-helper-console.exe \
+	gspawn-win32-helper.exe \
+	gspawn-win64-helper-console.exe \
+	gspawn-win64-helper.exe \
+	gtk-query-immodules-3.0.exe \
+	gtk-update-icon-cache-3.0.exe \
+	libatk-1.*.dll \
+	libatkmm-1.*.dll \
+	libbz2-*.dll \
+	libcairo-*.dll \
+	libcairomm-1*.dll \
+	libepoxy-*.dll \
+	libffi-*.dll \
+	libexpat-*.dll \
+	libfontconfig-*.dll \
+	libfreetype-*.dll \
+	libgdk-3*.dll \
+	libgdk_pixbuf-2.*.dll \
+	libgdkmm-3.*.dll \
+	libgio-2.*.dll \
+	libgiomm-2.*.dll \
+	libglib-2.*.dll \
+	libglibmm*2.*.dll \
+	libgmodule-2.*.dll \
+	libgobject-2.*.dll \
+	libgraphite*.dll \
+	libgthread-2.*.dll \
+	libgtk-3*.dll \
+	libgtkmm-3*.dll \
+	libharfbuzz*.dll \
+	libiconv*.dll \
+	libintl*.dll \
+	libjasper*.dll \
+	libjpeg*.dll \
+	liblzma*.dll \
+	libpango*-1.*.dll \
+	libpixman*.dll \
+	libpng16-*.dll \
+	libsigc-2.*.dll \
+	libstdc++-*.dll \
+	libtiff-*.dll \
+	libwinpthread-*.dll \
+	libxml2-*.dll \
+	zlib1.dll
+
+
+# Don't strip smartctl (it will only change the header), and
+# don't strip update-smart-drivedb (it will break its CRC check).
+win-dist-prepare: all
+	$(MKDIR_P) win-dist
+	cp $(top_srcdir)/data/icon_*.png win-dist/
+
+	$(MKDIR_P) win-dist/doc
+	cp data/nsis/distribution.txt win-dist/doc/
+	cp $(top_srcdir)/AUTHORS.txt $(top_srcdir)/LICENSE_* $(top_srcdir)/README.txt win-dist/doc/
+	cp $(top_srcdir)/NEWS win-dist/doc/NEWS.txt
+
+	cp src/gsmartcontrol.exe src/gsmartcontrol.exe.manifest win-dist/
+
+	unix2dos win-dist/doc/*.txt
+
+	cp -p "@WINDOWS_SYSROOT@"/bin/drivedb.h win-dist/
+	cp -p "@WINDOWS_SYSROOT@"/bin/smartctl-nc.exe win-dist/
+	cp -p "@WINDOWS_SYSROOT@"/bin/smartctl.exe win-dist/
+	cp -p "@WINDOWS_SYSROOT@"/bin/update-smart-drivedb.exe win-dist/
+
+	for file in $(GTK_BIN_FILES); do for f in "@WINDOWS_SYSROOT@/bin/"$$file; do if test -f "$${f}"; then cp -p "$${f}" win-dist/; fi; done; done
+
+#	<prefix>/etc should contain gtk-3.0/settings.ini
+	$(MKDIR_P) win-dist/etc
+	$(MKDIR_P) win-dist/etc/fonts
+	cp -p "@WINDOWS_SYSROOT@"/etc/fonts/fonts.conf win-dist/etc/fonts
+	cp -p -r "@WINDOWS_SYSROOT@"/etc/gtk-3.0 win-dist/etc
+
+	$(MKDIR_P) win-dist/share
+	cp -p -r "@WINDOWS_SYSROOT@"/share/themes win-dist/share
+
+#	needed for file chooser
+	$(MKDIR_P) win-dist/share/glib-2.0
+	cp -p -r "@WINDOWS_SYSROOT@"/share/glib-2.0/schemas win-dist/share/glib-2.0
+
+# 	$(MKDIR_P) win-dist/share/icons
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/hicolor win-dist/share/icons
+
+#	needed for window titlebar (if using client-side decorations)
+# 	$(MKDIR_P) win-dist/share/icons/Adwaita/16x16/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/16x16/actions/window-close-symbolic.symbolic.png win-dist/share/icons/Adwaita/16x16/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/16x16/actions/window-maximize-symbolic.symbolic.png win-dist/share/icons/Adwaita/16x16/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/16x16/actions/window-minimize-symbolic.symbolic.png win-dist/share/icons/Adwaita/16x16/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/16x16/actions/window-restore-symbolic.symbolic.png win-dist/share/icons/Adwaita/16x16/actions
+# 	$(MKDIR_P) win-dist/share/icons/Adwaita/24x24/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/24x24/actions/window-close-symbolic.symbolic.png win-dist/share/icons/Adwaita/24x24/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/24x24/actions/window-maximize-symbolic.symbolic.png win-dist/share/icons/Adwaita/24x24/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/24x24/actions/window-minimize-symbolic.symbolic.png win-dist/share/icons/Adwaita/24x24/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/24x24/actions/window-restore-symbolic.symbolic.png win-dist/share/icons/Adwaita/24x24/actions
+# 	$(MKDIR_P) win-dist/share/icons/Adwaita/32x32/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/32x32/actions/window-close-symbolic.symbolic.png win-dist/share/icons/Adwaita/32x32/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/32x32/actions/window-maximize-symbolic.symbolic.png win-dist/share/icons/Adwaita/32x32/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/32x32/actions/window-minimize-symbolic.symbolic.png win-dist/share/icons/Adwaita/32x32/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/32x32/actions/window-restore-symbolic.symbolic.png win-dist/share/icons/Adwaita/32x32/actions
+# 	$(MKDIR_P) win-dist/share/icons/Adwaita/48x48/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/48x48/actions/window-close-symbolic.symbolic.png win-dist/share/icons/Adwaita/48x48/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/48x48/actions/window-maximize-symbolic.symbolic.png win-dist/share/icons/Adwaita/48x48/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/48x48/actions/window-minimize-symbolic.symbolic.png win-dist/share/icons/Adwaita/48x48/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/48x48/actions/window-restore-symbolic.symbolic.png win-dist/share/icons/Adwaita/48x48/actions
+# 	$(MKDIR_P) win-dist/share/icons/Adwaita/64x64/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/64x64/actions/window-close-symbolic.symbolic.png win-dist/share/icons/Adwaita/64x64/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/64x64/actions/window-maximize-symbolic.symbolic.png win-dist/share/icons/Adwaita/64x64/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/64x64/actions/window-minimize-symbolic.symbolic.png win-dist/share/icons/Adwaita/64x64/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/64x64/actions/window-restore-symbolic.symbolic.png win-dist/share/icons/Adwaita/64x64/actions
+# 	$(MKDIR_P) win-dist/share/icons/Adwaita/96x96/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/96x96/actions/window-close-symbolic.symbolic.png win-dist/share/icons/Adwaita/96x96/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/96x96/actions/window-maximize-symbolic.symbolic.png win-dist/share/icons/Adwaita/96x96/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/96x96/actions/window-minimize-symbolic.symbolic.png win-dist/share/icons/Adwaita/96x96/actions
+# 	cp -p "@WINDOWS_SYSROOT@"/share/icons/Adwaita/96x96/actions/window-restore-symbolic.symbolic.png win-dist/share/icons/Adwaita/96x96/actions
+
+#	other
+	cp -p "@WINDOWS_SYSROOT@"/bin/libgcc_s_*.dll win-dist/
+	cp -p "@WINDOWS_SYSROOT@"/bin/libpcre-1.dll win-dist/
+
+
+nsis-dist-prepare: win-dist-prepare
+	cp -a win-dist nsis-dist
+	cp $(top_srcdir)/data/gsmartcontrol.ico nsis-dist/
+	cp data/nsis/*.nsi $(top_srcdir)/data/nsis/nsi_* nsis-dist/
+	unix2dos nsis-dist/*.nsi
+
+nsis-dist-nocleanup: nsis-dist-prepare
+	cd nsis-dist && @NSIS_EXEC@ gsmartcontrol.nsi
+	mv nsis-dist/$(PACKAGE)-$(VERSION)-@WINDOWS_SUFFIX@.exe .
+
+nsis-dist-cleanup:
+	rm -rf nsis-dist
+
+nsis-dist: nsis-dist-prepare nsis-dist-nocleanup nsis-dist-cleanup
+
+
+win-zip-dist-prepare: win-dist-prepare
+	cp -a win-dist $(WIN_ZIP_NAME)
+
+win-zip-dist-nocleanup: win-zip-dist-prepare
+	zip -K -9r $(WIN_ZIP_NAME).zip $(WIN_ZIP_NAME)
+
+win-zip-dist-cleanup:
+	rm -rf $(WIN_ZIP_NAME)
+
+win-zip-dist: win-zip-dist-prepare win-zip-dist-nocleanup win-zip-dist-cleanup
+
+
+
+
+distclean-local: win-dist-clean
+
+
+

NEWS

@@ -0,0 +1,180 @@
+
+Version 1.0.0, released on xxxxxxx
+	Ported to GTK+ 3.
+
+Version 0.9.0, released on 2017-05-11
+	Implemented (untested) support for Linux-based Areca controllers with
+		enclosures.
+	Implemented (untested) support for Windows-based Areca controllers (thanks
+		to Richard Kagerer).
+	Implemented (untested) support for Linux-based HP controllers with cciss
+		and hpsa/hpahcisr drivers (thanks to Fabrice Bacchella).
+	Changes in Preferences no longer fail silently until rescan/restart.
+	Better drive detection under Windows after removable drives are detached.
+	Windows version is no longer marked as "dpi aware" since it's not
+		supported that well.
+	Drive attribute descriptions have been updated (including clarifications
+		for SSDs).
+	Added support for SSD-only and HDD-only vendor attributes.
+	Devices having only basic info can be displayed now in the info window.
+	Fixed BDRW drive detection (it was detected as a HDD).
+	Other minor improvements.
+	A number of issues have been fixed (including a crash).
+
+Version 0.8.7, released on 2012-08-11
+	Implemented support for Adaptec RAID 5805 controller and possibly other
+		Adaptec models as well (Linux).
+	Implemented support for Areca RAID controller detection under Linux
+		(untested).
+	Implemented support for 3ware 3w-sas-supported (twl) RAID controller
+		detection under Linux (untested).
+	Implemented support for systems with several different 3ware controllers
+		(twa/twe/twl).
+	Fixed invalid parsing of tw_cli output which caused non-detection of
+		drives and controllers with controller or port numbers greater than 9
+		if tw_cli was found (3ware linux, windows).
+	The duplicate drives are no longer shown for some Intel matrix controllers
+		under Windows; Intel RAID controllers are fully supported under
+		Windows now.
+	Added options to show device name and serial number under drive icons.
+	Updated SMART attribute definitions and added warnings for SSD lifetime
+		attributes.
+	gsmartcontrol-root has a new argument "--desktop=..." which replaces the
+		old positional argument; compatibility with the old invocation syntax
+		has been retained.
+	Completely documented the source using doxygen tags.
+	Added support for Fedora's consolehelper.
+	Made GSmartControl DPI-aware under Windows.
+	Fixed compilation issues with clang and gcc 4.7, as well as glib 2.31.x
+		and newer.
+	Fixed minor issues in NSIS installer.
+	Fixed other minor bugs and made minor improvements.
+
+Version 0.8.6, released on 2011-06-12
+	Support detecting drives behind 3ware controllers (Linux, Windows),
+		including tw_cli/cx/px mode in Windows. Having tw_cli is recommended
+		but not required.
+	Added support for specifying -d option and extra parameters via command
+		line, "Add Device" and "Preferences" dialogs. This change effectively
+		adds full support for multiple drives behind a single device name.
+	Beesu and su-to-root are supported by gsmartcontrol-root script now.
+	Completely revamped the attribute database and its handling, should be a
+		lot more usable and forward-compatible now; SSD attributes are also
+		included.
+	In-program help has been expanded considerably.
+	General improvements to user interface have been implemented (better GNOME
+		HIG compliance, better tooltips, dialogs, etc...).
+	Added ability to show smartctl output for devices whose info could not be
+		parsed fully.
+	Attributes in "brief" format are supported now.
+	The parser has been updated to reflect the recent changes in smartctl.
+	Quit and rescan operations are no longer denied without confirmation when
+		tests are running.
+	The Windows NSIS installer has been vastly improved.
+	Better support for Windows Vista and 7.
+	Changed copyright notices for files with Whatever License to use Unlicense.
+	Added other minor features and fixed quite a few bugs.
+
+Version 0.8.5, released on 2009-09-05
+	GSmartControl now uses XDG config directory for per-user configuration on
+		UNIX and CSIDL_PROFILE directory on Windows. Existing configuration is
+		migrated automatically.
+	The names are shown correctly for unsupported devices even with the latest
+		smartctl snapshots now.
+	Smartctl SVN revision is shown (if available).
+	The progress bars update properly when parallel tests are run.
+	Windows: GSmartControl should be able to operate on any valid filesystem
+		path (not just locale-representable ones).
+	Windows: GSmartControl is now officially compilable on x86_64 via mingw64.
+	Fixed compilation under very old gtkmm/libglademm, and with gcc 4.4.
+	Fixed parsing of multiple error types in SMART error log.
+	Added minor features and fixed miscellaneous bugs.
+
+Version 0.8.4, released on 2009-03-23
+	Linux Software RAID devices are blacklisted now. (backported from Debian).
+	Attributes tab is before the capabilities tab now.
+	A man page has been generously contributed by Giuseppe Iuculano
+		<giuseppe@iuculano.it>.
+	Smartctl version now includes the CVS snapshot date (if available).
+	Windows: Look for "smartctl-nc.exe" instead of "smartctl.exe" by default.
+	Windows: Use smartmontools-supplied smartctl-nc.exe by default (if found).
+	Other minor changes (mainly Debian backports).
+
+Version 0.8.3, released on 2008-12-27
+	A random "Smartctl returned an empty output" error on Windows was fixed.
+		Thanks to Zurab Khetsuriani for testing.
+	Fixed a parser issue which prevented running self-tests in Windows.
+	The supplied icon (hopefully) shows correctly in Windows 2000 now.
+	This release adds an official support for Windows 2000 SP4.
+	Added scripts to allow GSmartControl to read smartctl data from
+		cron-generated files. This allows users to read somewhat recent
+		smartctl information without having to run GSmartControl as root.
+		Generously contributed by Alex Butcher <alex dot butcher 'at'
+		assursys.co.uk>.
+	Configure script correctly aborts instead of printing a warning if gtkmm
+		or libglademm (if needed) is not found.
+	Configure script now accepts --enable-windows-console,
+		--disable-abort-if-no-gtkmm, --disable-abort-if-no-glade-reader,
+		as well as Windows-supporting "auto" for --enable-nsis-wine and
+		--with-nsis.
+	Configure's --with-win32-env has been renamed to --with-windows-dlls.
+	The "About" dialog shows version information now.
+	Minor bugs were fixed.
+
+Version 0.8.2, released on 2008-12-10
+	Fixed gsmartcontrol_root.sh script to support distributions with no
+		/usr/sbin in their users' paths (thanks to Erwan Velu).
+	Added desktop auto-detection to gsmartcontrol_root.sh script. This allows
+		us to use only one desktop file (thanks to Erwan Velu).
+	Added Debian package directory (named "debian.dist" for now to avoid
+		control file conflicts with Build Service).
+	Renamed gsmartcontrol_root.sh to gsmartcontrol-root, to make Debian happy.
+	Added make targets for Windows packages (zip and NSIS).
+	Fixed Windows-related issues (Vista is fully supported now).
+	Fixed minor bugs:
+		Smartctl parser is win32-locale-aware now.
+		No more unnecessary parsing.
+		No segfault on exit under Windows and Solaris.
+		A friendlier message is displayed if smartctl was not found.
+		No highlighted labels when switching tabs in Information window.
+
+Version 0.8.1, released on 2008-11-11
+	Disabled Linux "by-id" drive detection - it's unreliable on some broken
+		systems.
+	Added some more attribute descriptions.
+	Our names for attributes override smartctls' now.
+	Added a proper "Add Device" dialog for Windows.
+	Added an icon and resource file for Windows.
+	Fixed minor bugs.
+
+Version 0.8.0rc4, released on 2008-10-20
+	FreeBSD support (tested with DesktopBSD 1.6 (FreeBSD 6.3) / x86).
+	NetBSD support (tested with NetBSD 4.0.1 / x86).
+	OpenBSD support (tested with OpenBSD 4.3 / x86-64 / gcc-3.3.5).
+	Solaris/gcc support (tested with Solaris 10 / x86 / gcc-3.4.3 / blastwave).
+	Solaris/sunstudio support (tested with Solaris 10 / x86 / sunstudio12 /
+		sunfreeware).
+	Code to support Windows, Mac OS X, QNX.
+	Support of older pcre versions (at least 4.5, maybe older too).
+	Added gsmartcontrol_root.sh script to easily run gsmartcontrol as root.
+	Improved .desktop files.
+	License for tests and examples is legally more correct now.
+	Minor bugfixes.
+
+Version 0.8.0rc3, released on 2008-10-08
+	Added support for udevless Linux distributions by providing a fallback
+		/proc/partitions-based drive detection method. The new method adds
+		support for Linux 2.4 and older systems. Thanks to Paul Marwick for
+		reporting and testing.
+	Fixed invalid error messages with directory-related operations.
+	Fixed invalid verbosity levels of console output of debug messages in
+		non-debug builds.
+	Improved rpm spec file - now supports building on OpenSUSE build
+		service with various distributions as targets.
+
+Version 0.8.0rc2, released on 2008-10-05
+	Fixed compilation under gcc 4.3. Thanks to Peter Linnell for reporting.
+	Removed test data (there's a lot of it and it's unnecessary).
+
+Version 0.8.0rc1, released on 2008-10-01
+	Initial public release.

README.txt

@@ -1,43 +1,46 @@
 
 About GSmartControl
 
-GSmartControl - Hard disk drive health inspection tool.
+GSmartControl - Hard disk drive and SSD health inspection tool.
 
 GSmartControl is a graphical user interface for smartctl (from smartmontools
 package, see http://smartmontools.sourceforge.net), which is a tool for
 querying and controlling SMART (Self-Monitoring, Analysis, and Reporting
-Technology) data on modern hard disk drives. It allows you to inspect the
-drive's SMART data to determine its health, as well as run various tests on
-it.
+Technology) data on modern hard disk and solid-state drives. It allows you to
+inspect the drive's SMART data to determine its health, as well as run various
+tests on it.
 
-Note: Only ATA drives (both PATA and SATA) are supported for now.
+Note: GSmartControl supports ATA drives (both PATA and SATA), various USB to
+ATA bridges and drives behind some RAID controllers (selected models of
+3ware, Areca, Adaptec, Intel RAID controllers).
 
-http://gsmartcontrol.berlios.de
+http://gsmartcontrol.sourceforge.net
 
 
 
 Features
 
-Automatically report and highlight any abnormal SMART information.
+* automatically reports and highlights any anomalies;
 
-Ability to enable / disable SMART.
+* allows enabling/disabling SMART;
 
-Ability to enable / disable Automatic Offline Data Collection - A short
+* allows enabling/disabling Automatic Offline Data Collection - a short
 self-check that the drive will perform automatically every four hours with no
-impact on performance.
+impact on performance;
 
-Ability to set global and per-drive options for smartctl.
+* supports configuration of global and per-drive options for smartctl;
 
-Display drive identity, capabilities, attributes, error and self-test logs.
+* performs SMART self-tests;
 
-Perform SMART self-tests.
+* displays drive identity information, capabilities, attributes, and
+self-test/error logs;
 
-Ability to load smartctl output as a "virtual" device, which acts just like a
-real (read-only) device.
+* can read in smartctl output from a saved file, interpreting it as a
+read-only virtual device;
 
-Works on most smartctl-supported operating systems.
+* works on most smartctl-supported operating systems;
 
-Extensive help information.
+* has extensive help information.
 
 
 
@@ -49,15 +52,15 @@ methods to predict certain kinds of failures with certain chance of success.
 Long answer: read below.
 
 Self-Monitoring, Analysis, and Reporting Technology, or SMART, is a
-monitoring system for hard drives to detect and report various indicators of
-reliability, in the hope of anticipating failures. It is implemented inside
-the drives SMART provides several ways of monitoring hard drive health. It
-may provide information about general health, various drive attributes (for
-example, number of unreadable sectors), error logs, and so on. It may also
-provide ways to instruct the drive to run various self-tests, which may report
-valuable information. It may even automatically scan the disk surface in when
-the drive is idle, and repair the defects, reallocating the data to more safe
-areas.
+monitoring system for hard drives and SSDs to detect and report various
+indicators of reliability, in the hope of anticipating failures. SMART is
+implemented inside the drives, providing several ways of monitoring the drive
+health. It may present information about general health, various drive
+attributes (for example, number of unreadable sectors), error logs, and so on.
+It may also provide ways to instruct the drive to run various self-tests,
+which may report valuable information. It may even automatically scan the disk
+surface in when the drive is idle, repairing the defects while reallocating
+the data to more safe areas.
 
 While having SMART sounds really good, there are some nuances to consider. One
 of the common pitfalls is that it may create a false sense of security. That
@@ -73,15 +76,15 @@ necessarily agree on precise attribute definitions and measurement units, the
 exact meaning of the attributes may vary greatly across different drive
 models.
 
-At present SMART is implemented individually by manufacturers, and while some
+At present SMART is implemented individually by manufacturers. While some
 aspects are standardized for compatibility, others are not. In fact, most
-manufacturers refer the users to their own health monitoring utilities, and
+manufacturers refer the users to their own health monitoring utilities and
 advice against taking SMART data seriously. Nevertheless, SMART may prove an
 effective measure against data loss.
 
 Yet another issue is that quite often the drives have bugs which prevent
 correct SMART usage. This is usually due to buggy firmware, or the
-manufacturer ignoring the standard. Luckily, smartmontools usually detects
+manufacturer ignoring the standards. Luckily, smartmontools usually detects
 these bugs and works around them.
 
 
@@ -94,33 +97,22 @@ You need to have the following software installed:
 
 * smartmontools - see http://smartmontools.sourceforge.net .
 
-* GTK+, version 2.6 or higher - see http://www.gtk.org .
+* GTK+, version 3.4 or higher - see http://www.gtk.org .
 
-* Gtkmm, version 2.6 or higher - see http://www.gtkmm.org .
-
-* libglademm, version 2.4 or higher - see http://www.gtkmm.org .
-Note: libglademm is not needed when using GTK 2.12 and Gtkmm 2.12.
-
-Note that having GTK+ 2.12 and Gtkmm 2.12 is HIGHLY recommended. While earlier
-versions may work, they may produce suboptimal results and buggy behavior.
-Libglademm is not needed when using GTK / Gtkmm 2.12.
+* Gtkmm, version 3.4 or higher - see http://www.gtkmm.org .
 
 Most of these packages are probably already provided by your distribution.
 Here are the packages you need to have to build GSmartControl on some Linux
 distributions:
 
-OpenSUSE, SLES, SLED:
-gcc-c++, pcre-devel, gtkmm2-devel, (possibly) libglademm-devel.
+openSUSE, SLES, SLED:
+gcc-c++, pcre-devel, gtkmm3-devel.
 
 Fedora, CentOS, RHEL:
-gcc-c++, pcre-devel, gtkmm24-devel, (possibly) libglademm24-devel.
-
-Mandriva:
-gcc-c++, gcc-cpp, libpcre-devel, gtkmm2.4-devel, (possibly)
-libglademm2.4-devel.
+gcc-c++, pcre-devel, gtkmm30-devel.
 
 Ubuntu, Debian GNU/Linux:
-g++, libpcre3-dev, libgtkmm-2.4-dev, (possibly) libglademm-2.4-dev.
+g++, libpcre3-dev, libgtkmm-3.0-dev.
 
 Note that usually you need to specify only these packages - the rest is
 installed automatically by the package manager's dependency resolver. Keep in
@@ -130,31 +122,27 @@ Note: If using the official Windows package, the requirements are listed on
 GSmartControl's website.
 
 
-
 The following operating systems are supported:
 
 * Linux - All the popular configurations should work.
 
-* FreeBSD - Tested with DesktopBSD 1.6 (FreeBSD 6.3) / x86.
+* FreeBSD - Tested with DesktopBSD / x86.
 
-* NetBSD - Tested with NetBSD 4.0.1 / x86.
+* NetBSD - Tested with NetBSD / x86.
 
-* OpenBSD - Tested with OpenBSD 4.3 / x86-64 / gcc-3.3.5.
-
-* Windows (2000 SP4 or newer) - Tested with Windows 2000 SP4, XP SP2 and Vista
-SP1. The Windows port uses pd0, pd1, etc... for physical drives 0, 1, etc... .
-
-* Solaris - Tested with Solaris 10 / x86 / gcc-3.4.3 / blastwave,
-Solaris 10 / x86 / sunstudio12 / sunfreeware. OpenSolaris should work but has
-not been tested yet. Note that until either smartctl gets ATA support under
-Solaris or GSmartControl gets SCSI support, these configurations are
-essentially useless.
-
-* Mac OS X - 3rd-party testing by Fink project.
+* OpenBSD - Tested with OpenBSD / x86-64.
 
 * DragonFlyBSD - Code written but no testing has been performed yet. Expected
 to work without any issues.
 
+* Windows Vista SP2 (32-bit and 64-bit), Windows 7 SP1, Windows Server 2008,
+Windows 8.1, Windows 10. The Windows port uses pd0, pd1, etc...
+for physical drives 0, 1, etc... .
+
+* Solaris.
+
+* Mac OS X - 3rd-party testing by the MacPorts and Fink projects.
+
 * QNX - Code written but no testing has been performed yet.
 
 
@@ -171,9 +159,9 @@ Long answer: read below.
 
 First, check if you can find a pre-built package for your distribution or
 operating system - they usually provide the best integration and the easiest
-installation procedure. For Linux, one option is to try the OpenSUSE Build
+installation procedure. For Linux, one option is to try the openSUSE Build
 Service - it provides ready-to-install packages for various popular Linux
-distributions (OpenSUSE, Fedora, etc...). See
+distributions (openSUSE, Fedora, etc...). See
 http://download.opensuse.org/repositories/home:/alex_sh/ .
 
 If you want to compile from source, check that you have all the required
@@ -187,6 +175,18 @@ directly from the build directory.
 
 
 
+Smartctl Options
+
+GSmartControl tries its best to guard the user from having to specify smartctl
+options. However, this is not always possible due to drive firmware bugs,
+unimplemented features, and so on. The smartctl manual page contains all the
+information you may need when dealing with smartctl.
+See http://smartmontools.sourceforge.net/man/smartctl.8.html
+
+Additional information is available at http://smartmontools.sourceforge.net
+
+
+
 Command Line Options
 
 GSmartControl inherits options from GTK+ and other libraries, so be sure to
@@ -200,18 +200,24 @@ The most important parameters are:
 
 -?, --help - Show help options.
 
--V, --version - Display version information.
+-l, --no-locale - Don't use system locale.
 
--l, --no-locale - Disable locale.
+-V, --version - Display version information.
 
 --no-scan - Don't scan devices on startup.
 
---no-hide-tabs - Don't hide non-identity tabs when SMART is disabled.
+--no-hide-tabs - Don't hide non-identity tabs when SMART is disabled. Useful
+for debugging.
 
---add-virtual - Load smartctl data from file, creating a virtual drive.
+--add-virtual - Load smartctl data from file, creating a virtual drive. You
+can specify this option multiple times.
 
---add-device - Add this device to device list. Useful with --no-scan to list
-certain drives only.
+--add-device - Add this device to device list. The format of the device is
+"<device>::<type>::<extra_args>", where type and extra_args are optional. This
+option is useful with --no-scan to list certain drives only. You can specify
+this option multiple times.
+Example: --add-device /dev/sda --add-device /dev/twa0::3ware,2 --add-device
+'/dev/sdb::::-T permissive'.
 
 -v, --verbose - Enable verbose logging; same as --verbosity-level 5.
 
@@ -279,38 +285,28 @@ For more information, see smartctl and smartd documentation.
 
 Known Issues
 
-Only ATA (both PATA and SATA) disks are supported for now. The main reasons
-are:
+Only ATA drives (both PATA and SATA), various USB to ATA bridges and drives
+behind some RAID controllers are supported for now. The main reasons are:
 
 * We can't support drives which don't work with smartmontools. This affects
 drives which don't support SMART or don't export SMART data correctly (e.g.
-USB enclosures, RAIDs, etc...).
+some USB enclosures, RAIDs, etc...).
 
 * Smartctl's output for SCSI drives is completely different compared to ATA.
 Also, SCSI drives are rarely found in desktop systems and the servers rarely
 have X11 / Gtkmm running, so this is a low priority task.
 
-* I only have ATA drives, so testing would be almost impossible.
+* I only have ATA drives, so testing anything else is very difficult.
 
 Immediate Offline Tests are not supported. I haven't found a way to reliably
 monitor them yet. Besides, they run automatically anyway if Automatic Offline
 Data Collection is enabled.
 
-You may run several tests on different drives in parallel, but you will only
-see the progress information of the last executing test. So, if you run tests
-on drives A, B and C (in that order), you won't be able to monitor the tests
-on A and B until C completes. And you won't be able to see any progress on A
-until both B and C complete their tests. This doesn't affect the tests
-themselves, just your ability to see their progress.
-
 Testing is only supported on drives which correctly report their progress
 information in capabilities.
 
 Not all drives support disabling Automatic Offline Data Collection, even if
-they report otherwise.
-
-Running on GTK+ / Gtkmm versions earlier than 2.12 may cause visual artifacts,
-usability issues (especially with tooltips and icons), instability, etc...
+they report otherwise. Unfortunately, there's no way to detect such drives.
 
 The texts probably contain a lot of grammatical errors, English being my third
 language and all.
@@ -327,19 +323,18 @@ terminal emulator (e.g., xterm, konsole or gnome-terminal):
 
 smartctl -a /dev/sda
 
-Note: If using official Windows packages, smartctl.exe doesn't provide any
-output. Use smartctl_console.exe instead. The devices name should be /dev/pd1
-for the second physical drive, etc... .
+Note: If using Windows, the device name should be /dev/pd1 for the second
+physical drive, etc... .
 
 If you still think it's a GSmartControl issue, please collect the following
 information about your system. Without it, it may be very hard or impossible
 to fix the bug.
 
-* Which operating system you use (for example, OpenSUSE Linux 11.0).
+* Which operating system you use (for example, openSUSE Linux 11.4).
 
 * Which version of GTK and Gtkmm you have installed. Finding this out is very
-distribution-specific. For example, on OpenSUSE it would be
-"rpm -q gtk2 gtkmm2". Some distributions have gtkmm24 instead. You may also
+distribution-specific. For example, on openSUSE it would be
+"rpm -q gtk3 gtkmm3". Some distributions have gtkmm30 instead. You may also
 search them in your distribution's graphical package manager, if there is one.
 
 * Execution log from the program, if possible. To obtain it, run the program
@@ -372,7 +367,7 @@ For license information, see LICENSE_gsmartcontrol.txt file.
 
 You may notice that GSmartControl is not licensed under "GNU GPL version X or
 later", but under "GNU GPL version X and Y". I firmly believe that it's unwise
-to license a piece of code under non-existant licenses, whatever anyone else
+to license a piece of code under non-existent licenses, whatever anyone else
 might say. The reason for this is that one simply CANNOT know that, say, in 20
 years FSF won't be bought by some corporation who will release GPL version Z
 which will completely reverse the reasons GPL was created for.

TODO

@@ -0,0 +1,242 @@
+
+
+GTKMM Notes:
+
+To transfer an ownership from your local code to a container, use
+Gtk::Button* pButton = Gtk::manage(new Gtk::Button("Test"));
+container->add(*pButton);
+(add() takes an object by reference).
+otherwise, you will need to delete() it.
+
+local scope destruction also works if using stack variables.
+{
+	Gtk::Button aButton;
+	// destroyed here
+}
+
+
+A treeview (also iconview, combobox) from glade comes
+with existing model, which should be unset.
+
+
+Bugs / patches:
+	Patch pangomm for Pango::strip_markup().
+
+
+
+--------------------------------------------------------
+
+TODO:
+
+Don't rely on smartctl return code (2), parse the output instead.
+	This will allow us to show the Info page.
+
+?Fix not being able to quit while executing commands.
+	Cannot reproduce.
+	https://www.google.com/search?client=opera&q=IA__gtk_main_quit:+assertion+%60main_loops+!=+NULL'+failed&sourceid=opera&ie=utf-8&oe=utf-8&channel=suggest
+	https://developer.gnome.org/gtk2/2.24/gtk2-General.html#gtk-main-quit
+	https://www.google.com/search?num=50&hl=en&safe=off&client=opera&hs=Dr5&channel=suggest&q=calling+gtk_main_quit+during+gtk_main_iteration+warning&oq=calling+gtk_main_quit+during+gtk_main_iteration+warning&gs_l=serp.12...7064.8155.0.12753.8.8.0.0.0.0.216.935.0j6j1.7.0.les%3B..0.0...1c.1.4.serp.GUiDL5IM2U8
+	https://developer.gnome.org/glib/2.34/glib-The-Main-Event-Loop.html#g-main-loop-quit
+
+
+In main window add multi-selection support and right-click menu with various
+	tests, so that it's possible to run multiple tests in parallel from there.
+
+
+Areca detection
+	Linux:
+		Somehow differentiate between the cards with expanders (-d areca,N/E) and without (-d areca,N).
+		The expander ones seem to have "ix" (case-insensitive) as their name suffixes.
+			areca,N - N is [1,24].
+			areca,N/E - N is [1,128], E is [1,8].
+				We should limit these using some config key (36 for N and 4 for E seems ok).
+				N/E syntax is since smartmontools 5.43.
+					For older versions we get: /dev/<something>: Option -d areca,N requires N to be a non-negative integer
+
+
+
+
+Add ability (through ctrl-C?) to copy individual rows from attributes page,
+	in tab-separated format (for easy pasting into libreoffice).
+
+
+Investiage the new "-l ssd" and "-l devstat" options (since 5.42)
+
+Check also other options in 5.42 and 5.43.
+	"-g all" looks promising alongside -i (shows APM and other stuff as well).
+
+Add --identify option to context menu, for convenience.
+
+Add menu item - "update drive database" (not sure about linux, should
+	check if it's supported first; also need to run it in terminal).
+
+
+Testing:
+	If ETA time has elapsed, but it's still only at 10% completion,
+		ETA 0 is displayed. Fix.
+	If smartctl -t ... returns an error, testing=true should not be set.
+		Can't reproduce it?
+	Detect running tests on launch (maybe ask the user too? some tests
+		may be stuck due to bad firmware, e.g. 3ware/windows).
+
+
+
+48-bit ATA command support:
+	'-l xerror' -> Extended Comprehensive Error log: An multi-sector and
+	LBA48 capable version of '-l error'. Output is similar, except more
+	entries can exists and the high bytes of the registers are also printed.
+	Some newer drives (Samsung) only write to this log.
+
+	'-l xselftest' -> Extended Self Test Log: An multi-sector and LBA48
+	capable version of '-l selftest'. Output will be similar, except more
+	entries can exists and the LBA values can be somewhat longer.
+
+	"smartctl -l this_wont_exist" gives the list of supported logs - this
+		is needed to detect xerror / xselftest support in smartctl.
+
+
+Rework drive properties UI:
+	use 48-bit or not or auto.
+	Enable/disable/dont_touch SMART on startup for this drive.
+	Enable/disable/dont_touch AODC on startup for this drive.
+	Add --init-smart-only option to only apply the SMART/AODC enabling status
+		from the drive properties.
+		Add also --no-init-smart to avoid doing that on GUI startup.
+
+Notifications:
+	Tied to (drive::subdrive, notif_key, exact_value(optional)).
+		If exact_value isn't specified when ignoring, notify on every value change.
+	Ignore options:
+		Per-drive: Ignore all notifications for this key, ignore only this value.
+	Don't generate multiple notifications for the same drive/key combo.
+	Clearing in preferences: Clear all ignored, clear ignored for this drive, clear individual.
+	Soft-warnings require "-a" by default, tricky for scsi (maybe try -a, then -i?).
+
+Monitor:
+	Needs root access, so not gonna happen until the dbus/udisks stuff
+		is finalized.
+	Same program, add --tray option to start in tray only.
+	Option to enable the tray icon.
+	Option to continue running in the tray on window close.
+	Use freedesktop notifications when notifications are generated
+		and we're running in tray only.
+		Don't generate the same notification at a single run time if it was
+			ignored (untouched) by the user; Change the tray icon and
+			show them in the main window instead.
+	Periodically re-run smartctl to refresh the notifications.
+	Periodically see if drives were added / removed (possibly use OS callbacks
+		instead of polling?)
+
+Win7 widget:
+	Can be done in html/js.
+	Shows temperature
+	Detects drives
+	Opens GSmartControl
+
+If a drive is not recognized, suggest using -d (sat, sat,12, ...)
+	Refer the user to
+	http://sourceforge.net/apps/trac/smartmontools/wiki/Supported_USB-Devices
+
+
+
+RAID:
+	http://sourceforge.net/apps/trac/smartmontools/wiki/Supported_RAID-Controllers
+
+	Areca Windows:
+		Detection not supported by smartctl --scan-open.
+
+	Areca FreeBSD: since 5.42.
+		Call as: smartctl -a -d areca,[1-24] /dev/arcmsr1
+
+	3ware FreeBSD:
+		Call as: smartctl -i -d 3ware,[0-127] /dev/twa0  (or twe0)
+		Detection: unknown.
+
+	LSI MegaRAID (SCSI/SAS), Linux:
+		Call as: smartctl -i -d megaraid,[0-?] /dev/sda
+			We should differentiate between ordinary sda and RAID one (not sure if sda is detected).
+		Detection: unknown.
+
+	HighPoint RocketRAID ((S)ATA) Linux:
+		Call as: smartctl -i -d hpt,[1-8]/[1-8] /dev/sda
+		Call as: smartctl -i -d hpt,[1-8]/[1-8]/[1-15] /dev/sda
+		Note: /dev/sda should be derived from this controller.
+			We should differentiate between ordinary sda and RAID one (not sure if sda is detected).
+		Smartctl docs specify smaller limits, but the code says these are the ones.
+		Detection: unknown.
+
+	HighPoint RocketRAID ((S)ATA) FreeBSD:
+		Call as: smartctl -i -d hpt,[1-8]/[1-8] /dev/hptrr
+		Call as: smartctl -i -d hpt,[1-8]/[1-8]/[1-15] /dev/hptrr
+		Note: /dev/hptrr should be derived from this controller.
+		Smartctl docs specify smaller limits, but the code says these are the ones.
+		Detection: unknown.
+		TODO: Analyze sent info.
+
+	CCISS (HP (Compaq) Smart Array Controller) FreeBSD:
+		Seems to be the same as Linux (uses the same driver?).
+		Detection: unknown.
+
+
+
+
+libdebug:
+	per-channel disabling.
+	per-channel formatting.
+	all flags should be per-channel.
+	bug: if -q is passed, Execution log doesn't contain libdebug log. (requires per-channel status control).
+	use format_time() instead of ctime() and friends, with ISO formatting.
+
+
+
+'-l sataphy' -> SATA Phy event counters: Non-SMART feature, useful to detect SATA cabling problems.
+
+
+SCT Temperatures
+	-l scttemp prints temperature and history.
+	-t scttempint,N[,p] (N - count, p - preserve across reset or not).
+		This configures temperature logging interval (1 min by default) and clears the history.
+	-l scterc[,...] to get/set the SCT Error Recovery Control time limit (5.40 and newer).
+
+
+Add detection for Interix (i586-pc-interix3), maybe with debian?
+
+
+
+
+----------- SMART stuff ----------
+
+
+Run one-time Immediate Offline test (-t offline).
+	Offline tests only update Attributes, and if errors are found they will
+	appear in SMART error log. Self-test logs are unaffected.
+	Abort (-X). Abort works with Offline only if there's
+	"Abort Offline collection upon new command" capability.
+	If the drive has "Suspend Offline collection upon new  command" capability,
+	immediate offline test may be tracked through --capabilities (not on mine!).
+	If it's "Abort Offline collection upon new command", then the test
+	will abort on --capabilities or --abort.
+
+
+Polling time
+The self-test routine recommended polling time shall be equal to the number of minutes that is the minimum
+recommended time before which the host should first poll for test completion status. Actual test time could
+be several times this value. Polling before this time could extend the self-test execution time or abort the test
+depending on the state of bit 2 of the off-line data capability bits.
+
+Autosave
+This command enables and disables the optional attribute autosave feature of the device. This command
+may either allow the device, after some vendor specified event, to save the device updated attribute values
+to non-volatile memory; or this command may cause the autosave feature to be disabled. The state of the
+attribute autosave feature (either enabled or disabled) shall be preserved by the device across power cycles.
+A value of zero written by the host into the device’s Sector Count register before issuing this command shall
+cause this feature to be disabled. Disabling this feature does not preclude the device from saving SMART
+data to non-volatile memory during some other normal operation such as during a power-on or power-off
+sequence or during an error recovery sequence.
+A value of F1h written by the host into the device’s Sector Count register before issuing this command shall
+cause this feature to be enabled. Any other meaning of this value or any other non-zero value written by the
+host into this register before issuing this command may differ from device to device. The meaning of any
+non-zero value written to this register at this time shall be preserved by the device across power cycles.
+
+
+

autoconf.m4/ac_cxx_exceptions.m4

@@ -26,12 +26,23 @@
 
 AC_DEFUN([AC_CXX_EXCEPTIONS],
 [AC_CACHE_CHECK(whether the compiler supports exceptions,
-ac_cv_cxx_exceptions,
-[AC_LANG_PUSH([C++])
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[try { throw  1; } catch (int i) { return i; }]])],[ac_cv_cxx_exceptions=yes],[ac_cv_cxx_exceptions=no])
- AC_LANG_POP([])
-])
-if test "$ac_cv_cxx_exceptions" = yes; then
-  AC_DEFINE(HAVE_EXCEPTIONS,,[define if the compiler supports exceptions])
-fi
+	ac_cv_cxx_exceptions,
+	[AC_LANG_PUSH([C++])
+		AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],
+			[[try { throw  1; } catch (int i) { return i; }]])],
+			[ac_cv_cxx_exceptions=yes], [ac_cv_cxx_exceptions=no])
+		AC_LANG_POP([])
+	])
+
+	if test "$ac_cv_cxx_exceptions" = yes; then
+		AC_DEFINE(HAVE_EXCEPTIONS, 1,
+			[defined to 1 if the compiler supports exceptions, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_EXCEPTIONS, 0,
+			[defined to 1 if the compiler supports exceptions, 0 otherwise])
+	fi
+
 ])
+
+
+

autoconf.m4/ac_cxx_namespaces.m4

@@ -26,12 +26,22 @@
 
 AC_DEFUN([AC_CXX_NAMESPACES],
 [AC_CACHE_CHECK(whether the compiler implements namespaces,
-ac_cv_cxx_namespaces,
-[AC_LANG_PUSH([C++])
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[namespace Outer { namespace Inner { int i = 0; }}]], [[using namespace Outer::Inner; return i;]])],[ac_cv_cxx_namespaces=yes],[ac_cv_cxx_namespaces=no])
- AC_LANG_POP([])
-])
-if test "$ac_cv_cxx_namespaces" = yes; then
-  AC_DEFINE(HAVE_NAMESPACES,,[define if the compiler implements namespaces])
-fi
+	ac_cv_cxx_namespaces,
+	[AC_LANG_PUSH([C++])
+		AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+			[[namespace Outer { namespace Inner { int i = 0; }}]],
+			[[using namespace Outer::Inner; return i;]])],
+			[ac_cv_cxx_namespaces=yes], [ac_cv_cxx_namespaces=no])
+		AC_LANG_POP([])
+	])
+	if test "$ac_cv_cxx_namespaces" = yes; then
+		AC_DEFINE(HAVE_NAMESPACES, 1,
+			[defined to 1 if the compiler implements namespaces, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_NAMESPACES, 0,
+			[defined to 1 if the compiler implements namespaces, 0 otherwise])
+	fi
 ])
+
+
+

autoconf.m4/ac_cxx_rtti.m4

@@ -26,25 +26,35 @@
 
 AC_DEFUN([AC_CXX_RTTI],
 [AC_CACHE_CHECK(whether the compiler supports Run-Time Type Identification,
-ac_cv_cxx_rtti,
-[AC_LANG_PUSH([C++])
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <typeinfo>
-class Base { public :
-             Base () {}
-             virtual int f () { return 0; }
-           };
-class Derived : public Base { public :
-                              Derived () {}
-                              virtual int f () { return 1; }
-                            };
-]], [[Derived d;
-Base *ptr = &d;
-return typeid (*ptr) == typeid (Derived);
-]])],[ac_cv_cxx_rtti=yes],[ac_cv_cxx_rtti=no])
- AC_LANG_POP([])
-])
-if test "$ac_cv_cxx_rtti" = yes; then
-  AC_DEFINE(HAVE_RTTI,,
-            [define if the compiler supports Run-Time Type Identification])
-fi
+	ac_cv_cxx_rtti,
+	[AC_LANG_PUSH([C++])
+		AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <typeinfo>
+			class Base {
+				public:
+					Base () {}
+					virtual int f () { return 0; }
+			};
+			class Derived : public Base {
+				public :
+					Derived () {}
+					virtual int f () { return 1; }
+			};
+		]], [[
+			Derived d;
+			Base* ptr = &d;
+			return typeid (*ptr) == typeid (Derived);
+		]])],
+		[ac_cv_cxx_rtti=yes], [ac_cv_cxx_rtti=no])
+		AC_LANG_POP([])
+	])
+	if test "$ac_cv_cxx_rtti" = yes; then
+		AC_DEFINE(HAVE_RTTI, 1,
+			[defined to 1 if the compiler supports Run-Time Type Identification, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_RTTI, 0,
+			[defined to 1 if the compiler supports Run-Time Type Identification, 0 otherwise])
+	fi
 ])
+
+
+

autoconf.m4/ac_cxx_verbose_terminate_handler.m4

@@ -25,16 +25,25 @@
 
 AC_DEFUN([AC_CXX_VERBOSE_TERMINATE_HANDLER],
 [AC_CACHE_CHECK(whether the compiler has __gnu_cxx::__verbose_terminate_handler,
-ac_cv_verbose_terminate_handler,
-[
-  AC_REQUIRE([AC_CXX_EXCEPTIONS])
-  AC_REQUIRE([AC_CXX_NAMESPACES])
-  AC_LANG_PUSH([C++])
-  AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <exception>]], [[std::set_terminate(__gnu_cxx::__verbose_terminate_handler);]])],[ac_cv_verbose_terminate_handler=yes],[ac_cv_verbose_terminate_handler=no
-  ])
-  AC_LANG_POP([])
-])
-if test "$ac_cv_verbose_terminate_handler" = yes; then
-  AC_DEFINE(HAVE_VERBOSE_TERMINATE_HANDLER, , [define if the compiler has __gnu_cxx::__verbose_terminate_handler])
-fi
+	ac_cv_verbose_terminate_handler,
+	[
+		AC_REQUIRE([AC_CXX_EXCEPTIONS])
+		AC_REQUIRE([AC_CXX_NAMESPACES])
+		AC_LANG_PUSH([C++])
+		AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
+			[[#include <exception>]],
+			[[std::set_terminate(__gnu_cxx::__verbose_terminate_handler);]])],
+			[ac_cv_verbose_terminate_handler=yes], [ac_cv_verbose_terminate_handler=no])
+		AC_LANG_POP([])
+	])
+	if test "$ac_cv_verbose_terminate_handler" = yes; then
+		AC_DEFINE(HAVE_VERBOSE_TERMINATE_HANDLER, 1,
+			[defined to 1 if the compiler has __gnu_cxx::__verbose_terminate_handler, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_VERBOSE_TERMINATE_HANDLER, 0,
+			[defined to 1 if the compiler has __gnu_cxx::__verbose_terminate_handler, 0 otherwise])
+	fi
 ])
+
+
+

autoconf.m4/app_auto_clear_flags.m4

@@ -1,7 +1,7 @@
 
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 

autoconf.m4/app_compiler_options.m4

@@ -1,7 +1,7 @@
 
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 
@@ -30,7 +30,7 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 	# ---- Common compiler options (warnings, etc...)
 
 	AC_ARG_ENABLE(common-options, AS_HELP_STRING([--enable-common-options=<compiler>|auto|none],
-			[enable useful compilation options (warnings, mostly). Accepted values are auto, none, gnu, intel, sun. (Default: auto)]),
+			[enable useful compilation options (warnings, mostly). Accepted values are auto, none, gnu, clang, intel, sun. (Default: auto)]),
 		[app_cv_compiler_common_options=${enableval}], [app_cv_compiler_common_options=auto])
 
 	# the default value is "yes" (if no value given after =), treat it as auto.
@@ -47,10 +47,11 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 
 	if test "x$app_cv_compiler_common_options" != "xnone"; then
 
-		# gcc / gnu environment, mingw, cygwin.
-		if test "x$app_cv_compiler_common_options" = "xgnu"; then
+		# gcc (or clang) / gnu environment, mingw, cygwin.
+		if test "x$app_cv_compiler_common_options" = "xgnu" ||  test "x$app_cv_compiler_common_options" = "xclang"; then
 
-			if test "x$app_cv_target_os_env" = "xmingw" || test "x$app_cv_target_os_env" = "xcygwin"; then
+			if test "x$app_cv_target_os_env" = "xmingw32" || test "x$app_cv_target_os_env" = "xmingw64" \
+					|| test "x$app_cv_target_os_env" = "xcygwin"; then
 				# mingw gcc options:
 				# -mno-cygwin - generate non-cygwin executables in cygwin's mingw.
 				# -mms-bitfields - make structures compatible with msvc. recommended default for non-cygwin.
@@ -59,10 +60,13 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 				app_cv_compiler_options_ldflags="$app_cv_compiler_options_ldflags -mms-bitfields"
 			fi
 
-			# Note: Disabled -Wconversion, it was causing lots of silly warnings under x86-64.
-			app_cv_compiler_tmp_var="-Wall -Wcast-align -Wcast-qual \
--Wctor-dtor-privacy -Wfloat-equal -Wnon-virtual-dtor -Woverloaded-virtual \
+			app_cv_compiler_tmp_var="-Wall -Wcast-align -Wcast-qual -Wconversion \
+-Wfloat-equal -Wnon-virtual-dtor -Woverloaded-virtual \
 -Wpointer-arith -Wshadow -Wsign-compare -Wsign-promo -Wundef -Wwrite-strings";
+			if test "x$app_cv_compiler_common_options" = "xclang"; then
+				# these are really annoying
+				app_cv_compiler_tmp_var="$app_cv_compiler_tmp_var -Wno-sign-conversion -Wno-format-security"
+			fi
 			app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags $app_cv_compiler_tmp_var";
 			app_cv_compiler_options_cxxflags="$app_cv_compiler_options_cxxflags $app_cv_compiler_tmp_var";
 
@@ -78,7 +82,16 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 		# suncc
 		elif test "x$app_cv_compiler_common_options" = "xsun"; then
 			# Enable useful language extensions (e.g. __func__ in C++). Details at
-			# http://docs.sun.com/app/docs/doc/819-5267/6n7c46drp?a=view
+			# http://docs.sun.com/app/docs/doc/820-7599/bkapy?a=view
+			# Additional options: "-staticlib=Crun -staticlib=Cstd" - link statically to
+			# C++ runtime and standard libraries.
+			# http://docs.sun.com/app/docs/doc/820-7599/bkaws?a=view
+
+			# STLport seems to be more standards-compliant, but incompatible
+			# with default Cstd. Also, it's not guaranteed to keep compatibility
+			# between versions. Select it with "-library=stlport4".
+			# http://docs.sun.com/app/docs/doc/820-7599/bkakg?a=view
+			# http://developers.sun.com/solaris/articles/cmp_stlport_libCstd.html
 			app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags \
 +w -errtags -erroff=notemsource,notused -features=extensions";
 			app_cv_compiler_options_cxxflags="$app_cv_compiler_options_cxxflags \
@@ -93,7 +106,7 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 	# ---- Compiler options for debug builds
 
 	AC_ARG_ENABLE(debug-options, AS_HELP_STRING([--enable-debug-options=<compiler>|auto|none],
-			[enable debug build options. Accepted values are auto, none, gnu, intel, sun. (Default: none)]),
+			[enable debug build options. Accepted values are auto, none, gnu, clang, intel, sun. (Default: none)]),
 		[app_cv_compiler_debug_options=${enableval}], [app_cv_compiler_debug_options=none])
 
 	# the default value is "yes" (if no value given after =), treat it as auto.
@@ -115,7 +128,7 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 		AC_DEFINE([DEBUG_BUILD], [1], [Defined for debug builds])
 
 		# gcc, mingw
-		if test "x$app_cv_compiler_debug_options" = "xgnu"; then
+		if test "x$app_cv_compiler_debug_options" = "xgnu" || test "x$app_cv_compiler_debug_options" = "xclang"; then
 			# We could put libstdc++ debug options here, but it generates binary-incompatible
 			# C++ code, which leads to runtime errors with e.g. libsigc++.
 			app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags -g3 -O0";
@@ -145,7 +158,7 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 	# ---- Compiler options for optimized builds
 
 	AC_ARG_ENABLE(optimize-options, AS_HELP_STRING([--enable-optimize-options=<compiler>|auto|none],
-			[enable optimized build options. Accepted values are auto, none, gnu, intel, sun. (Default: none)]),
+			[enable optimized build options. Accepted values are auto, none, gnu, clang, intel, sun. (Default: none)]),
 		[app_cv_compiler_optimize_options=${enableval}], [app_cv_compiler_optimize_options=none])
 
 	# the default value is "yes" (if no value given after =), treat it as auto.
@@ -163,13 +176,13 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 	if test "x$app_cv_compiler_optimize_options" != "xnone"; then
 
 		# gcc, mingw
-		if test "x$app_cv_compiler_optimize_options" = "xgnu"; then
+		if test "x$app_cv_compiler_optimize_options" = "xgnu" || test "x$app_cv_compiler_optimize_options" = "xclang"; then
 			# -mtune=generic is since gcc 4.0 iirc
-			if test "x$app_cv_target_os_env" = "xmingw" || test "x$app_cv_target_os_env" = "xcygwin"; then
-				app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags -g0 -O3 -s -march=i586";
-				app_cv_compiler_options_cxxflags="$app_cv_compiler_options_cxxflags -g0 -O3 -s -march=i586";
-				app_cv_compiler_options_ldflags="$app_cv_compiler_options_ldflags -g0 -O3 -s -march=i586";
-			else
+			if test "x$app_cv_target_os_env" = "xmingw32"; then
+				app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags -g0 -O3 -s -march=i686";
+				app_cv_compiler_options_cxxflags="$app_cv_compiler_options_cxxflags -g0 -O3 -s -march=i686";
+				app_cv_compiler_options_ldflags="$app_cv_compiler_options_ldflags -g0 -O3 -s -march=i686";
+			else  # mingw64, cygwin (they have new gcc), others.
 				app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags -g0 -O3 -s -mtune=generic";
 				app_cv_compiler_options_cxxflags="$app_cv_compiler_options_cxxflags -g0 -O3 -s -mtune=generic";
 				app_cv_compiler_options_ldflags="$app_cv_compiler_options_ldflags -g0 -O3 -s -mtune=generic";
@@ -218,7 +231,7 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 	# -mconsole - opposite of -mwindows, default.
 
 	AC_ARG_ENABLE(windows-console, AS_HELP_STRING([--enable-windows-console=yes|no|auto],
-			[enable windows console (MinGW only). Accepted values are yes, no, auto. ]
+			[enable windows console (MinGW and Cygwin only). Accepted values are yes, no, auto. ]
 			[Auto means disabled for optimized builds, enabled for all others. (Default: auto)]),
 		[app_cv_compiler_windows_console=${enableval}], [app_cv_compiler_windows_console=auto])
 
@@ -231,15 +244,12 @@ AC_DEFUN([APP_COMPILER_OPTIONS], [
 		fi
 	fi
 
-	if test "x$app_cv_target_os_env" = "xmingw" || test "x$app_cv_target_os_env" = "xcygwin"; then
+	if test "x$app_cv_target_os_env" = "xmingw32" || test "x$app_cv_target_os_env" = "xmingw64" \
+			|| test "x$app_cv_target_os_env" = "xcygwin"; then
 		if test "x$app_cv_compiler_windows_console" = "xno"; then
-			app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags -mwindows";
-			app_cv_compiler_options_cxxflags="$app_cv_compiler_options_cxxflags -mwindows";
 			app_cv_compiler_options_ldflags="$app_cv_compiler_options_ldflags -mwindows";
 		else
 			# specify -mconsole even if it's the default - it should override the user-supplied setting
-			app_cv_compiler_options_cflags="$app_cv_compiler_options_cflags -mconsole";
-			app_cv_compiler_options_cxxflags="$app_cv_compiler_options_cxxflags -mconsole";
 			app_cv_compiler_options_ldflags="$app_cv_compiler_options_ldflags -mconsole";
 		fi
 		AC_MSG_NOTICE([Enable windows console: $app_cv_compiler_windows_console])

autoconf.m4/app_cxx_extern_c_overload.m4

@@ -1,13 +1,14 @@
 
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 
 
-# Check whether C++ compiler supports overloading between
-# extern "C" function pointer and C++ function pointer. GCC and
+# Check whether C++ compiler supports overloading of functions
+# with function pointer argument differing only in extern "C" specification,
+# that is, extern "C" function pointer and C++ function pointer. GCC and
 # Intel treat them equally, so no overloads are needed (or accepted)
 # there.
 
@@ -21,7 +22,8 @@
 # for template parameters (I don't remember the exact details).
 
 
-# If such support is found, HAVE_CXX_EXTERN_C_OVERLOAD is defined.
+# If such overloading support is found,
+# HAVE_CXX_EXTERN_C_OVERLOAD is defined.
 
 
 AC_DEFUN([APP_CXX_EXTERN_C_OVERLOAD], [
@@ -37,8 +39,11 @@ AC_DEFUN([APP_CXX_EXTERN_C_OVERLOAD], [
 		AC_LANG_POP([])
 	])
 	if test "x$ac_cv_cxx_extern_c_overload" = "xyes"; then
-		AC_DEFINE(HAVE_CXX_EXTERN_C_OVERLOAD, ,
-			[Define if the C++ complier accepts extern C function pointer overload])
+		AC_DEFINE(HAVE_CXX_EXTERN_C_OVERLOAD, 1,
+			[Defined to 1 if the C++ complier accepts extern C function pointer overload, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_CXX_EXTERN_C_OVERLOAD, 0,
+			[Defined to 1 if the C++ complier accepts extern C function pointer overload, 0 otherwise])
 	fi
 ])
 

autoconf.m4/app_cxx_func.m4

@@ -1,14 +1,14 @@
 
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 
 
 # Check whether C++ compiler supports C99 __func__.
 
-AC_DEFUN([APP_CXX___FUNC__], [
+AC_DEFUN([APP_CXX___func__], [
 	AC_CACHE_CHECK(whether $CXX recognizes __func__, app_cv_cxx___func__, [
 		AC_LANG_PUSH([C++])
 		AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],
@@ -17,8 +17,11 @@ AC_DEFUN([APP_CXX___FUNC__], [
 		AC_LANG_POP([])
 	])
 	if test "x$app_cv_cxx___func__" = "xyes"; then
-		AC_DEFINE(HAVE_CXX___func__, ,
-			[Define if the C++ complier supports __func__])
+		AC_DEFINE(HAVE_CXX___func__, 1,
+			[Defined to 1 if the C++ complier supports __func__, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_CXX___func__, 0,
+			[Defined to 1 if the C++ complier supports __func__, 0 otherwise])
 	fi
 ])
 
@@ -35,8 +38,11 @@ AC_DEFUN([APP_CXX___FUNCTION__], [
 		AC_LANG_POP([])
 	])
 	if test "x$app_cv_cxx___FUNCTION__" = "xyes"; then
-		AC_DEFINE(HAVE_CXX___FUNCTION__, ,
-			[Define if the C++ complier supports __FUNCTION__])
+		AC_DEFINE(HAVE_CXX___FUNCTION__, 1,
+			[Defined to 1 if the C++ complier supports __FUNCTION__, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_CXX___FUNCTION__, 0,
+			[Defined to 1 if the C++ complier supports __FUNCTION__, 0 otherwise])
 	fi
 ])
 

autoconf.m4/app_detect_os.m4

@@ -1,7 +1,7 @@
 
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 
@@ -59,12 +59,26 @@ AC_DEFUN([APP_DETECT_OS_KERNEL], [
 			app_cv_[]$1[]_os_kernel_macro="LINUX";
 			;;
 
-		*mingw* | *cygwin*)
+		i*86-*mingw* | i*86-*cygwin*)
 			# mingw defines _WIN32. msvc defines _WIN32 (built-in), and WIN32 via windows.h.
 			# Other mingw defines include: __WINNT, __WINNT__, __WIN32__, __i386, _X86_,
 			# i386, __i386__, WIN32, __MINGW32__, WINNT (all equal to 1).
-			app_cv_[]$1[]_os_kernel="windows";
-			app_cv_[]$1[]_os_kernel_macro="WINDOWS";
+			app_cv_[]$1[]_os_kernel="windows32";
+			app_cv_[]$1[]_os_kernel_macro="WINDOWS32";
+			;;
+
+		x86_64-*-mingw* | x86_64-*-cygwin*)
+			# mingw64 defines the same stuff as 32-bit one, plus _WIN64, __MINGW64__, etc... .
+			# Keep in mind that if you're generating a 32-bit application, the kernel will
+			# be windows32 even if you run it on 64-bit Windows.
+			app_cv_[]$1[]_os_kernel="windows64";
+			app_cv_[]$1[]_os_kernel_macro="WINDOWS64";
+			;;
+
+		*interix*)
+			# Interix is a kernel on top of windows, so we treat it separately.
+			app_cv_[]$1[]_os_kernel="interix";
+			app_cv_[]$1[]_os_kernel_macro="INTERIX";
 			;;
 
 		# This includes debian gnu/kfreebsd. Dragonfly is checked separately.
@@ -124,8 +138,14 @@ AC_DEFUN([APP_DETECT_OS_KERNEL], [
 	if test "x${app_cv_[]$1[]_os_kernel}" = "xlinux"; then
 		AC_DEFINE($2[]LINUX, 1, [$1 OS kernel])
 	fi
-	if test "x${app_cv_[]$1[]_os_kernel}" = "xwindows"; then
-		AC_DEFINE($2[]WINDOWS, 1, [$1 OS kernel])
+	if test "x${app_cv_[]$1[]_os_kernel}" = "xwindows32"; then
+		AC_DEFINE($2[]WINDOWS32, 1, [$1 OS kernel])
+	fi
+	if test "x${app_cv_[]$1[]_os_kernel}" = "xwindows64"; then
+		AC_DEFINE($2[]WINDOWS64, 1, [$1 OS kernel])
+	fi
+	if test "x${app_cv_[]$1[]_os_kernel}" = "xinterix"; then
+		AC_DEFINE($2[]INTERIX, 1, [$1 OS kernel])
 	fi
 	if test "x${app_cv_[]$1[]_os_kernel}" = "xfreebsd"; then
 		AC_DEFINE($2[]FREEBSD, 1, [$1 OS kernel])
@@ -154,7 +174,9 @@ AC_DEFUN([APP_DETECT_OS_KERNEL], [
 
 	# Export to Makefile.am's.
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_LINUX, [test "x${app_cv_[]$1[]_os_kernel}" = "xlinux"])
-	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_WINDOWS, [test "x${app_cv_[]$1[]_os_kernel}" = "xwindows"])
+	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_WINDOWS32, [test "x${app_cv_[]$1[]_os_kernel}" = "xwindows32"])
+	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_WINDOWS64, [test "x${app_cv_[]$1[]_os_kernel}" = "xwindows64"])
+	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_INTERIX, [test "x${app_cv_[]$1[]_os_kernel}" = "xinterix"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_FREEBSD, [test "x${app_cv_[]$1[]_os_kernel}" = "xfreebsd"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_DRAGONFLY, [test "x${app_cv_[]$1[]_os_kernel}" = "xdragonfly"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_OPENBSD, [test "x${app_cv_[]$1[]_os_kernel}" = "xopenbsd"])
@@ -164,6 +186,19 @@ AC_DEFUN([APP_DETECT_OS_KERNEL], [
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_QNX, [test "x${app_cv_[]$1[]_os_kernel}" = "xqnx"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_UNKNOWN, [test "x${app_cv_[]$1[]_os_kernel}" = "xunknown"])
 
+
+	# composite ones, for easy checking
+
+	AM_CONDITIONAL(m4_toupper($1)[]_OS_KERNEL_FAMILY_WINDOWS, \
+			[test "x${app_cv_[]$1[]_os_kernel}" = "xwindows32" || test "x${app_cv_[]$1[]_os_kernel}" = "xwindows64" \
+				|| test "x${app_cv_[]$1[]_os_kernel}" = "xinterix"])
+
+	if test "x${app_cv_[]$1[]_os_kernel}" = "xwindows32" || test "x${app_cv_[]$1[]_os_kernel}" = "xwindows64" \
+			|| test "x${app_cv_[]$1[]_os_kernel}" = "xinterix"; then
+		AC_DEFINE($2[]FAMILY_WINDOWS, 1, [$1 OS kernel family])
+	fi
+
+
 	AC_MSG_RESULT([${app_cv_[]$1[]_os_kernel}])
 ])
 
@@ -216,9 +251,17 @@ AC_DEFUN([APP_DETECT_OS_ENV], [
 			app_cv_[]$1[]_os_env="cygwin";
 			app_cv_[]$1[]_os_env_macro="CYGWIN";
 			;;
-		*mingw*)
-			app_cv_[]$1[]_os_env="mingw";
-			app_cv_[]$1[]_os_env_macro="MINGW";
+		i*86-*mingw*)
+			app_cv_[]$1[]_os_env="mingw32";
+			app_cv_[]$1[]_os_env_macro="MINGW32";
+			;;
+		x86_64-*-mingw*)
+			app_cv_[]$1[]_os_env="mingw64";
+			app_cv_[]$1[]_os_env_macro="MINGW64";
+			;;
+		*interix*)
+			app_cv_[]$1[]_os_env="interix";
+			app_cv_[]$1[]_os_env_macro="INTERIX";
 			;;
 		# This includes gnu/linux, debian gnu/kfreebsd, debian gnu/netbsd...
 		*-gnu | gnu*)
@@ -271,8 +314,14 @@ AC_DEFUN([APP_DETECT_OS_ENV], [
 	if test "x${app_cv_[]$1[]_os_env}" = "xcygwin"; then
 		AC_DEFINE($2[]CYGWIN, 1, [$1 OS userspace environment])
 	fi
-	if test "x${app_cv_[]$1[]_os_env}" = "xmingw"; then
-		AC_DEFINE($2[]MINGW, 1, [$1 OS userspace environment])
+	if test "x${app_cv_[]$1[]_os_env}" = "xmingw32"; then
+		AC_DEFINE($2[]MINGW32, 1, [$1 OS userspace environment])
+	fi
+	if test "x${app_cv_[]$1[]_os_env}" = "xmingw64"; then
+		AC_DEFINE($2[]MINGW64, 1, [$1 OS userspace environment])
+	fi
+	if test "x${app_cv_[]$1[]_os_env}" = "xinterix"; then
+		AC_DEFINE($2[]INTERIX, 1, [$1 OS userspace environment])
 	fi
 	if test "x${app_cv_[]$1[]_os_env}" = "xgnu"; then
 		AC_DEFINE($2[]GNU, 1, [$1 OS userspace environment])
@@ -304,7 +353,9 @@ AC_DEFUN([APP_DETECT_OS_ENV], [
 
 	# Export to Makefile.am's.
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_CYGWIN, [test "x${app_cv_[]$1[]_os_env}" = "xcygwin"])
-	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_MINGW, [test "x${app_cv_[]$1[]_os_env}" = "xmingw"])
+	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_MINGW32, [test "x${app_cv_[]$1[]_os_env}" = "xmingw32"])
+	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_MINGW64, [test "x${app_cv_[]$1[]_os_env}" = "xmingw64"])
+	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_INTERIX, [test "x${app_cv_[]$1[]_os_env}" = "xinterix"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_GNU, [test "x${app_cv_[]$1[]_os_env}" = "xgnu"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_FREEBSD, [test "x${app_cv_[]$1[]_os_env}" = "xfreebsd"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_DRAGONFLY, [test "x${app_cv_[]$1[]_os_env}" = "xdragonfly"])
@@ -315,6 +366,7 @@ AC_DEFUN([APP_DETECT_OS_ENV], [
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_QNX, [test "x${app_cv_[]$1[]_os_env}" = "xqnx"])
 	AM_CONDITIONAL(m4_toupper($1)[]_OS_ENV_UNKNOWN, [test "x${app_cv_[]$1[]_os_env}" = "xunknown"])
 
+
 	AC_MSG_RESULT([${app_cv_[]$1[]_os_env}])
 ])
 

autoconf.m4/app_get_mt_flags.m4

@@ -1,14 +1,14 @@
 
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 
 
 # APP_GET_MT_FLAGS(flags_prefix[, action-if-not-found])
 # This macro detects compiler flags which are needed to compile a multi-threaded
-# (possibly pthreads-based) applications on target OS. flags_prefixCFLAGS,
+# (preferably pthreads-based) applications on target OS. flags_prefixCFLAGS,
 # flags_prefixCXXFLAGS and flags_prefixLIBS will be initialized (or appended to)
 # with the correct flags.
 
@@ -47,7 +47,7 @@ AC_DEFUN([APP_GET_MT_FLAGS], [
 	fi
 
 
-	# Compilers use at least 3 defines to indicate thread-safe support to standard libs:
+	# Compilers use at least 3 defines to enable thread-safe support:
 	# _THREAD_SAFE, _MT, _REENTRANT.
 	# We use the ones that are required for detected platform.
 
@@ -55,31 +55,34 @@ AC_DEFUN([APP_GET_MT_FLAGS], [
 		linux)
 			# glibc manual says that defining either _REENTRANT or _THREAD_SAFE
 			# enables some thread-safe implementations of glibc functions.
-			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "intel" \
-					|| test "$ax_cv_cxx_compiler_vendor" = "pathscale"; then
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang" \
+					|| test "$ax_cv_cxx_compiler_vendor" = "intel" || test "$ax_cv_cxx_compiler_vendor" = "pathscale"; then
 				app_cv_target_thread_cflags="-pthread -D_MT -D_THREAD_SAFE"
 				app_cv_target_thread_cxxflags="-pthread -D_MT -D_THREAD_SAFE"
 				app_cv_target_thread_libs="-pthread"
 				app_cv_target_thread_found="yes";
 
 			elif test "$ax_cv_cxx_compiler_vendor" = "sun"; then
-				# suncc needs -lpthread on posix but not solaris.
-				# -mt defines _REENTRANT too. Don't use -lthread.
+				# suncc's -mt expands to:
+				# "-D_REENTRANT -lpthread" on Linux, uses pthreads (pthread.h);
+				# "-D_REENTRANT -lthread" on Solaris, uses Solaris threads (thread.h).
+				# To use pthreads on Solaris, use "-mt -lpthread".
+				# http://docs.sun.com/app/docs/doc/820-7598/bjapp?a=view
 				app_cv_target_thread_cflags="-mt"
 				app_cv_target_thread_cxxflags="-mt"
-				app_cv_target_thread_libs="-mt -lpthread"
+				app_cv_target_thread_libs="-mt"
 				app_cv_target_thread_found="yes";
 
 			fi
 			;;
 
-		windows)
-			# NOTE: Not sure about cygwin.
+		windows*)
+			# NOTE: Not sure about cygwin or clang.
 			# NOTE: This only enables multithreaded code generation. For linking
 			# with pthreads-win32 you need additional flags.
 			# gcc man page: -mthreads: Support thread-safe exception handling on Mingw32.
 			# -mthreads defines -D_MT, and links with -lmingwthrd.
-			if test "$ax_cv_cxx_compiler_vendor" = "gnu"; then
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang"; then
 				app_cv_target_thread_cflags="-mthreads -D_THREAD_SAFE"
 				app_cv_target_thread_cxxflags="-mthreads -D_THREAD_SAFE"
 				app_cv_target_thread_libs="-mthreads"
@@ -87,11 +90,21 @@ AC_DEFUN([APP_GET_MT_FLAGS], [
 			fi
 			;;
 
-		freebsd | dragonfly | netbsd | openbsd)
+		interix)
+			# Interix kernel is implemented on top of windows kernel.
+			# Interix uses -D_REENTRANT for pthreads, automatically enabling -lpthread.
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu"; then
+				app_cv_target_thread_cflags="-D_REENTRANT"
+				app_cv_target_thread_cxxflags="-D_REENTRANT"
+				app_cv_target_thread_found="yes"
+			fi
+			;;
+
+		freebsd | dragonfly)
 			# NOTE: Not sure about debian gnu/kfreebsd and gnu/netbsd.
 			# Freebsd had -kthread, but it has been discontinued (afaik).
-			# For freebsd -pthread already replaces libc with libc_r.
-			if test "$ax_cv_cxx_compiler_vendor" = "gnu"; then
+			# For freebsd -pthread replaces libc with libc_r.
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang"; then
 				app_cv_target_thread_cflags="-pthread -D_MT -D_THREAD_SAFE"
 				app_cv_target_thread_cxxflags="-pthread -D_MT -D_THREAD_SAFE"
 				app_cv_target_thread_libs="-pthread"
@@ -99,37 +112,61 @@ AC_DEFUN([APP_GET_MT_FLAGS], [
 			fi
 			;;
 
+		openbsd)
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang"; then
+				app_cv_target_thread_cflags="-pthread -D_REENTRANT"
+				app_cv_target_thread_cxxflags="-pthread -D_REENTRANT"
+				app_cv_target_thread_libs="-pthread"
+				app_cv_target_thread_found="yes";
+			fi
+			;;
+
+		netbsd)
+			# See sys/featuretest.h
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang"; then
+				app_cv_target_thread_cflags="-pthread -D_REENTRANT"
+				app_cv_target_thread_cxxflags="-pthread -D_REENTRANT"
+				app_cv_target_thread_libs="-pthread"
+				app_cv_target_thread_found="yes";
+			fi
+			;;
+
 		solaris)
-			if test "$ax_cv_cxx_compiler_vendor" = "gnu"; then
-				# gnu documentation mentions -threads (and its aliases, -pthreads and -pthread)
-				app_cv_target_thread_cflags="-pthreads -D_MT -D_THREAD_SAFE"
-				app_cv_target_thread_cxxflags="-pthreads -D_MT -D_THREAD_SAFE"
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang"; then
+				# gnu documentation mentions -threads (and its aliases, -pthreads and -pthread).
+				# _REENTRANT is needed to enable some thread-safe equivalents of standard
+				# functions.
+				# http://docs.sun.com/app/docs/doc/805-8005-04/6j7hcvqs4?l=ko&a=view
+				app_cv_target_thread_cflags="-pthreads -D_MT -D_THREAD_SAFE -D_REENTRANT"
+				app_cv_target_thread_cxxflags="-pthreads -D_MT -D_THREAD_SAFE -D_REENTRANT"
 				app_cv_target_thread_libs="-pthreads"
 				app_cv_target_thread_found="yes"
 
 			elif test "$ax_cv_cxx_compiler_vendor" = "sun"; then
-				# -mt defines _REENTRANT too. Don't use -lthread.
+				# suncc's -mt expands to:
+				# "-D_REENTRANT -lpthread" on Linux, uses pthreads (pthread.h);
+				# "-D_REENTRANT -lthread" on Solaris, uses Solaris threads (thread.h).
+				# To use pthreads on Solaris, use "-mt -lpthread".
+				# http://docs.sun.com/app/docs/doc/820-7598/bjapp?a=view
 				# http://docs.sun.com/app/docs/doc/816-5175/pthreads-5?a=view
 				# http://docs.sun.com/app/docs/doc/816-5137/compile-74765?a=view
-				# There are two threading libraries, selectable via different switches.
-				app_cv_target_thread_cflags="-mt"
-				app_cv_target_thread_cxxflags="-mt"
-				app_cv_target_thread_libs="-mt"
+				# We use POSIX threads, so append -lpthread.
+				app_cv_target_thread_cflags="-mt -lpthread"
+				app_cv_target_thread_cxxflags="-mt -lpthread"
+				app_cv_target_thread_libs="-mt -lpthread"
 				app_cv_target_thread_found="yes"
 			fi
 			;;
 
 		darwin)
-			if test "$ax_cv_cxx_compiler_vendor" = "gnu"; then
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang"; then
 				# Darwin produces mt code by default, and -pthread is an error.
-				# gcc/darwin defines __APPLE__. __UNIX__ is not defined.
-				# -D_THREAD_SAFE
 				app_cv_target_thread_found="yes"
 			fi
 			;;
 
 		qnx)
-			if test "$ax_cv_cxx_compiler_vendor" = "gnu"; then
+			if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang"; then
 				# afaik, gcc/qnx produces mt code by default (at least on newer qnx releases),
 				# so no flags are needed.
 				app_cv_target_thread_found="yes"

autoconf.m4/app_use_system_extensions.m4

@@ -1,7 +1,7 @@
 
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2009  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 
@@ -13,6 +13,9 @@
 # Basically, it's the same as AC_USE_SYSTEM_EXTENSIONS,
 # but uses compiler flag approach instead of config.h.
 
+# The extensions used bring the system closer to the GNU,
+# X/Open (a superset of POSIX) and POSIX systems.
+
 # You must call AX_COMPILER_VENDOR
 # and APP_DETECT_OS_ENV([target], ...) before using this macro.
 
@@ -66,10 +69,43 @@ AC_DEFUN([APP_USE_SYSTEM_EXTENSIONS], [
 		solaris)
 			# The problem with solaris is that it has too many incompatible
 			# feature test macros, and there is no enable-all macro. Autoconf
-			# mistakenly assumes that __EXTENSIONS__ is the one, but
-			# it should be defined _in addition_ to feature test macros.
+			# assumes that __EXTENSIONS__ is the one, but it should be defined
+			# _in addition_ to feature test macros. Note that on its own, __EXTENSIONS__
+			# still enables some useful stuff like _LARGEFILE64_SOURCE.
 			# To support some posix macros, additional link objects are also required.
+			# Some *_SOURCE feature test macros may be incompatible with C++.
 			# http://docs.sun.com/app/docs/doc/816-5175/standards-5?a=view
+			app_cv_target_extension_cflags="-D__EXTENSIONS__"
+			app_cv_target_extension_cxxflags="-D__EXTENSIONS__"
+			;;
+
+		netbsd)
+			# There is no enable-all macro.
+			# (_XOPEN_SOURCE >= 500 || _NETBSD_SOURCE) is recommended.
+			# The default is _NETBSD_SOURCE, _XOPEN_SOURCE overrides it.
+			# The manual says that rename() will behave posix-like if _POSIX_C_SOURCE
+			# is defined. However, stdio.h uses (_XOPEN_SOURCE <= 2) condition,
+			# which is really bogus.
+			# See sys/featuretest.h
+			;;
+
+		mingw*)
+			# This enables standards-compliant stdio behaviour (regarding printf and
+			# friends), as opposed to msvc-compatible one. This is usually enabled
+			# by default if one of the usual macros are encountered (_XOPEN_SOURCE,
+			# _GNU_SOURCE, etc...).
+			# Also, we make the win2k API available (includes console functions, etc...).
+			# Other things to consider: _NO_OLDNAMES (disable "deprecated"
+			# non-underscored names like chdir (use _chdir), etc...).
+			# See _mingw.h for details.
+			app_cv_target_extension_cflags="-D__USE_MINGW_ANSI_STDIO=1 -DWINVER=0x0600"  # Since Vista
+			app_cv_target_extension_cxxflags="-D__USE_MINGW_ANSI_STDIO=1 -DWINVER=0x0600"
+			;;
+
+		interix)
+			# As per AC_USE_SYSTEM_EXTENSIONS.
+			app_cv_target_extension_cflags="-D_ALL_SOURCE"
+			app_cv_target_extension_cxxflags="-D_ALL_SOURCE"
 			;;
 
 	esac

autoconf.m4/ax_compiler_vendor.m4

@@ -53,7 +53,7 @@ AC_DEFUN([AX_COMPILER_VENDOR],
 AC_CACHE_CHECK([for _AC_LANG compiler vendor], ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor,
  [ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor=unknown
   # note: don't check for gcc first since some other compilers define __GNUC__
-  for ventest in intel:__ICC,__ECC,__INTEL_COMPILER ibm:__xlc__,__xlC__,__IBMC__,__IBMCPP__ pathscale:__PATHCC__,__PATHSCALE__ gnu:__GNUC__ sun:__SUNPRO_C,__SUNPRO_CC hp:__HP_cc,__HP_aCC dec:__DECC,__DECCXX,__DECC_VER,__DECCXX_VER borland:__BORLANDC__,__TURBOC__ comeau:__COMO__ cray:_CRAYC kai:__KCC lcc:__LCC__ metrowerks:__MWERKS__ sgi:__sgi,sgi microsoft:_MSC_VER watcom:__WATCOMC__ portland:__PGI; do
+  for ventest in clang:__clang__ intel:__ICC,__ECC,__INTEL_COMPILER ibm:__xlc__,__xlC__,__IBMC__,__IBMCPP__ pathscale:__PATHCC__,__PATHSCALE__ gnu:__GNUC__ sun:__SUNPRO_C,__SUNPRO_CC hp:__HP_cc,__HP_aCC dec:__DECC,__DECCXX,__DECC_VER,__DECCXX_VER borland:__BORLANDC__,__TURBOC__ comeau:__COMO__ cray:_CRAYC kai:__KCC lcc:__LCC__ metrowerks:__MWERKS__ sgi:__sgi,sgi microsoft:_MSC_VER watcom:__WATCOMC__ portland:__PGI; do
     vencpp="defined("`echo $ventest | cut -d: -f2 | sed 's/,/) || defined(/g'`")"
     AC_COMPILE_IFELSE([AC_LANG_PROGRAM(,[
 #if !($vencpp)

autoconf.m4/ax_cxx_gcc_abi_demangle.m4

@@ -28,29 +28,40 @@
 
 AC_DEFUN([AX_CXX_GCC_ABI_DEMANGLE],
 [AC_CACHE_CHECK(whether the compiler supports GCC C++ ABI name demangling,
-ac_cv_cxx_gcc_abi_demangle,
-[AC_LANG_PUSH([C++])
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <typeinfo>
-#include <cxxabi.h>
-#include <string>
+	ac_cv_cxx_gcc_abi_demangle,
+	[AC_LANG_PUSH([C++])
+		AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
+			#include <typeinfo>
+			#include <cxxabi.h>
+			#include <string>
+			#include <stdlib.h>  /* not cstdlib */
 
-template<typename TYPE>
-class A {};
-]], [[A<int> instance;
-int status = 0;
-char* c_name = 0;
+			template<typename TYPE>
+			class A {};
+		]], [[
+			A<int> instance;
+			int status = 0;
+			char* c_name = 0;
 
-c_name = abi::__cxa_demangle(typeid(instance).name(), 0, 0, &status);
+			c_name = abi::__cxa_demangle(typeid(instance).name(), 0, 0, &status);
 
-std::string name(c_name);
-free(c_name);
+			std::string name(c_name);
+			free(c_name);  /* not std::free() */
 
-return name == "A<int>";
-]])],[ac_cv_cxx_gcc_abi_demangle=yes],[ac_cv_cxx_gcc_abi_demangle=no])
- AC_LANG_POP([])
-])
-if test "$ac_cv_cxx_gcc_abi_demangle" = yes; then
-  AC_DEFINE(HAVE_GCC_ABI_DEMANGLE,1,
-            [define if the compiler supports GCC C++ ABI name demangling])
-fi
+			return name == "A<int>";
+		]])],
+		[ac_cv_cxx_gcc_abi_demangle=yes], [ac_cv_cxx_gcc_abi_demangle=no])
+		AC_LANG_POP([])
+	])
+	if test "$ac_cv_cxx_gcc_abi_demangle" = yes; then
+		AC_DEFINE(HAVE_GCC_ABI_DEMANGLE, 1,
+			[defined to 1 if the compiler supports GCC C++ ABI name demangling, 0 otherwise])
+	else
+		AC_DEFINE(HAVE_GCC_ABI_DEMANGLE, 0,
+			[defined to 1 if the compiler supports GCC C++ ABI name demangling, 0 otherwise])
+	fi
 ])
+
+
+
+

autogen.sh

@@ -16,7 +16,7 @@
 # autoconf
 
 
-autoreconf --verbose --install -W all
+autoreconf --verbose --install -W all --force
 
 
 rm -f config.cache

configure-dev

@@ -0,0 +1,77 @@
+#!/bin/bash
+
+# Configure a build directory according to developer flags
+
+type="$1";
+configure_script="$2";
+
+if [ "$type" == "" ]; then
+	echo "Usage: $0 <type> [<configure_script>]"
+	echo "where <type> is one of:"
+	echo "debug optimized icc clang win32 win32-debug win64-debug sun portland open64";
+	echo "<configure_script> is ../configure by default"
+	exit 1;
+fi
+
+if [ "$configure_script" == "" ]; then
+	configure_script="../configure";
+fi
+
+
+flags="";
+
+case $type in
+	gcc)
+		flags="--enable-optimize-options --enable-tests" ;;
+	gcc-debug)
+		flags="--enable-debug-options --enable-tests" ;;
+	clang-debug)
+		flags="CC=clang CXX=clang++ --enable-debug-options --enable-tests" ;;
+	icc-debug)
+		flags="CC=icc64 CXX=icpc64 --enable-debug-options  --enable-tests" ;;
+	sun)
+		flags="CC=suncc CXX=sunCC CFLAGS=\"-errwarn=%all -I/opt/sun/target64/include\" \
+			CXXFLAGS=\"-I/opt/sun/target64/include\" PATH=\"/opt/sun/sunstudio/bin:$PATH\" \
+			LDFLAGS=\"-R/opt/sun/target64/lib64 -L/opt/sun/target64/lib64\" \
+			PKG_CONFIG_PATH=\"/opt/sun/target64/lib64/pkgconfig:/usr/lib64/pkgconfig\" \
+			PKG_CONFIG_LIBDIR=\"\" --enable-tests" ;;
+
+	win32-cross)
+		flags="PATH=\"/usr/i686-w64-mingw32/bin:/usr/i686-w64-mingw32/sys-root/mingw/bin:$PATH\" \
+			--with-nsis=/usr/bin/makensis --with-windows-sysroot=/usr/i686-w64-mingw32/sys-root/mingw \
+			--enable-optimize-options --enable-tests --host=i686-w64-mingw32" ;;
+	win32-cross-debug)
+		flags="PATH=\"/usr/i686-w64-mingw32/bin:/usr/i686-w64-mingw32/sys-root/mingw/bin:$PATH\" \
+			--enable-debug-options --enable-tests --host=i686-w64-mingw32" ;;
+	win64-cross)
+		flags="PATH=\"/usr/x86_64-w64-mingw32/bin:/usr/x86_64-w64-mingw32/sys-root/mingw/bin:$PATH\" \
+			--with-nsis=/usr/bin/makensis --with-windows-sysroot=/usr/x86_64-w64-mingw32/sys-root/mingw \
+			--enable-optimize-options --enable-tests --host=x86_64-w64-mingw32" ;;
+	win64-cross-debug)
+		flags="PATH=\"/usr/x86_64-w64-mingw32/bin:/usr/x86_64-w64-mingw32/sys-root/mingw/bin:$PATH\" \
+			--enable-debug-options --enable-tests --host=x86_64-w64-mingw32" ;;
+
+	win32-msys)
+		flags="PATH=\"/mingw32/i686-w64-mingw32:/mingw32/bin:$PATH\" \
+			--with-nsis=/mingw32/bin/makensis.exe --with-windows-sysroot=/mingw32 \
+			--enable-optimize-options --enable-tests --host=i686-w64-mingw32" ;;
+	win32-msys-debug)
+		flags="PATH=\"/mingw32/i686-w64-mingw32:/mingw32/bin:$PATH\" \
+			--enable-debug-options --enable-tests --host=i686-w64-mingw32" ;;
+	win64-msys)
+		flags="PATH=\"/mingw64/x86_64-w64-mingw32:/mingw64/bin:$PATH\" \
+			--with-nsis=/mingw64/bin/makensis.exe --with-windows-sysroot=/mingw64 \
+			--enable-optimize-options --enable-tests --host=x86_64-w64-mingw32" ;;
+	win64-msys-debug)
+		flags="PATH=\"/mingw64/x86_64-w64-mingw32:/mingw64/bin:$PATH\" \
+			--enable-debug-options --enable-tests --host=x86_64-w64-mingw32" ;;
+esac
+
+
+echo "Running:"
+echo $configure_script $flags;
+
+$configure_script $flags
+
+
+exit $?

configure.ac

@@ -1,5 +1,5 @@
 
-AC_INIT([GSmartControl], 0.8.3, [], [gsmartcontrol])
+AC_INIT([GSmartControl],[1.0.0],[],[gsmartcontrol])
 
 AC_CONFIG_SRCDIR([configure.ac])
 AC_CONFIG_HEADERS([config.h])
@@ -22,6 +22,7 @@ AC_PROG_CXX
 #AC_PROG_CXXCPP
 
 #AM_PROG_LIBTOOL
+AM_PROG_AR
 
 # C++ support in checks
 #AC_LANG([C])
@@ -36,6 +37,9 @@ AC_CHECK_TOOL(WINDRES, windres)
 # Win32 external dll stripping (already detected by autoconf)
 # AC_CHECK_TOOL(STRIP, strip)
 
+# Defines LN_S, needed for man page installation.
+AC_PROG_LN_S
+
 
 # -------------------------------------------------------------------------------------
 
@@ -61,7 +65,13 @@ APP_DETECT_OS_KERNEL([build], [CONFIG_HOST_KERNEL_])
 APP_COMPILER_OPTIONS([])
 
 # Thread support for known configurations.
-APP_GET_MT_FLAGS([])
+# Sun compiler (at least on linux) has some runtime issues with stringstream
+# unless we use the thread flags. Also, Linux-based gdb fails to debug
+# a gcc-compiled binary for some reason.
+# Do this for all systems except mingw.
+if test "$app_cv_target_os_env" != "mingw32" && test "$app_cv_target_os_env" != "mingw64"; then
+	APP_GET_MT_FLAGS([])
+fi
 
 # Enable _GNU_SOURCE, etc...
 APP_USE_SYSTEM_EXTENSIONS([])
@@ -105,7 +115,7 @@ AX_CXX_GCC_ABI_DEMANGLE
 AC_CXX_VERBOSE_TERMINATE_HANDLER
 
 # detect __func__ support (defines HAVE_CXX___func__)
-APP_CXX___FUNC__
+APP_CXX___func__
 
 # detect __FUNCTION__ support (defines HAVE_CXX___FUNCTION__)
 APP_CXX___FUNCTION__
@@ -125,7 +135,8 @@ AC_CHECK_FUNCS([strtoll _strtoi64], [break])
 # but let's ignore it. Note: They may be supported by system libc,
 # but not enabled by default (e.g. by glibc feature macros). In that case,
 # defining them still leads to undefined symbols at link time, so we don't do it.
-# Header check is the best way to determine availability:
+# Header check is the best way to determine availability.
+# This defines HAVE_DECL_<symbol> to 1 or 0.
 AC_CHECK_DECLS([strtof, strtold], [], [], [[#include <stdlib.h>]])
 # link check only:
 # AC_CHECK_FUNCS([strtof strtold])
@@ -165,16 +176,21 @@ AC_ARG_ENABLE(abort-if-no-gtkmm, AS_HELP_STRING([--disable-abort-if-no-gtkmm],
 
 AC_MSG_NOTICE([Abort if no gtkmm is found: $app_cv_abort_if_no_gtkmm])
 
-# iconview is available since 2.6.0. gthread is not enabled by default.
-pkg_modules="gtkmm-2.4 >= 2.6.0 gthread-2.0 >= 2.0"
+pkg_modules="gtkmm-3.0 >= 3.4.0"
 
 # define ENABLE_GLIB and friends if it's found.
 gtkmm_found="no"
 
-PKG_CHECK_MODULES([GTKMM], [$pkg_modules], [
-		AC_DEFINE([ENABLE_GLIB], [1], [Whether GLib is installed])
-		AC_DEFINE([ENABLE_GLIBMM], [1], [Whether GLibmm is installed])
-		gtkmm_found="yes"], [gtkmm_found="no"])
+PKG_CHECK_MODULES([GTKMM], [$pkg_modules],
+		[gtkmm_found="yes"], [gtkmm_found="no"])
+
+if test "x$gtkmm_found" = "xyes"; then
+	AC_DEFINE([ENABLE_GLIB], [1], [Defined to 1 if GLib is installed, 0 otherwise])
+	AC_DEFINE([ENABLE_GLIBMM], [1], [Defined to 1 if glibmm is installed, 0 otherwise])
+else
+	AC_DEFINE([ENABLE_GLIB], [0], [Defined to 1 if GLib is installed, 0 otherwise])
+	AC_DEFINE([ENABLE_GLIBMM], [0], [Defined to 1 if glibmm is installed, 0 otherwise])
+fi
 
 if test "x$gtkmm_found" = "xno"; then
 	if test "x$app_cv_abort_if_no_gtkmm" = "xno"; then
@@ -185,24 +201,11 @@ if test "x$gtkmm_found" = "xno"; then
 	fi
 fi
 
-# GTK flags must be prepended, or glib_config.h conflict between
-# gtk 2.x and 1.2 may occur.
-
 #CFLAGS="$GTKMM_CFLAGS $CFLAGS"
 CXXFLAGS="$GTKMM_CFLAGS $CXXFLAGS"
 LIBS="$GTKMM_LIBS $LIBS"
 
 
-# Detect libglade / gtkbuilder support
-
-APP_CHOOSE_GLD_READER([C++], [LIBGLADE_])
-
-if test "$app_cv_gld_reader" = "libglade"; then
-	CFLAGS="$CFLAGS $LIBGLADE_CFLAGS"
-	CXXFLAGS="$CXXFLAGS $LIBGLADE_CXXFLAGS"
-	LIBS="$LIBS $LIBGLADE_LIBS"
-fi
-
 
 # -------------------------------------------------------------------------------------
 
@@ -237,66 +240,51 @@ LIBS="$LIBS $PCRE_LIBS"
 # -------------------------------------------------------------------------------------
 
 
-# Test stuff here...
-# <nothing>
-
-#SDL_VERSION=1.2.0
-#AM_PATH_SDL($SDL_VERSION, :,
-#	AC_MSG_ERROR([*** SDL version $SDL_VERSION not found!]) )
-#CFLAGS="$CFLAGS $SDL_CFLAGS"
-#CXXFLAGS="$CXXFLAGS $SDL_CFLAGS "
-#LIBS="$LIBS $SDL_LIBS"
-
-
-# -------------------------------------------------------------------------------------
-
-# -------------------------------------------------------------------------------------
-
-
 # Win32 distribution support (NSIS, zip)
 
 AC_ARG_WITH([nsis], [AS_HELP_STRING([--with-nsis=<location>|auto],
 		[specify makensis.exe location to support making NSIS packages]
 		[ (default: "C:\Program Files\NSIS\makensis.exe" for windows, ]
-		["~/.wine/drive_c/Program Files/NSIS/makensis.exe" for others)])],
+		["~/.wine/drive_c/Program Files/NSIS/Unicode/makensis.exe" for others)])],
 		[with_nsis=${withval}], [with_nsis=auto])
 
-AC_ARG_ENABLE([nsis-wine], [AS_HELP_STRING([--enable-nsis-wine=yes|no|auto],
-		[use wine to run makensis.exe when making NSIS packages (default: auto, which is no for windows, yes for others)])],
-		[with_nsis_wine=${enableval}], [with_nsis_wine=yes])
+AC_ARG_ENABLE([nsis-wine], [AS_HELP_STRING([--enable-nsis-wine=yes|no],
+		[use wine to run makensis.exe when making NSIS packages (default: no)])],
+		[with_nsis_wine=${enableval}], [with_nsis_wine=no])
 
-AC_ARG_WITH([windows-dlls], [AS_HELP_STRING([--with-windows-dlls],
-		[specify location of Windows dlls when making Windows packages (default: /target/bin)])],
-		[with_windows_env=${withval}], [win_windows_dlls=auto])
+AC_ARG_WITH([windows-sysroot], [AS_HELP_STRING([--with-windows-sysroot],
+		[specify location of Windows system root directory when making Windows packages (default: /mingw32)])],
+		[with_windows_sysroot=${withval}], [with_windows_sysroot=auto])
 
 if test "x$with_nsis" = "xauto" || test "x$with_nsis" = "x"; then
-	if test "x$app_cv_build_os_kernel" = "xwindows"; then
-		with_nsis="~/\".wine/drive_c/Program Files/NSIS/makensis.exe\"";
-	else
+	# if building on windows, use native paths
+	if test "x$app_cv_build_os_kernel" = "xwindows32" || test "x$app_cv_build_os_kernel" = "xwindows64"; then
 		with_nsis="\"C:\\Program Files\\NSIS\\makensis.exe\"";
-	fi
-fi
-
-if test "x$with_nsis_wine" = "xauto"; then
-	if test "x$app_cv_build_os_kernel" = "xwindows"; then
-		with_nsis_wine="no";
 	else
-		with_nsis_wine="yes";
+		with_nsis="~/\".wine/drive_c/Program Files/NSIS/Unicode/makensis.exe\"";
 	fi
 fi
 
 NSIS_EXEC="$with_nsis";
-if test "x$with_nsis_wine" != "xno"; then
+if test "x$with_nsis_wine" = "xyes"; then
 	NSIS_EXEC="wine $with_nsis";
 fi
 
-if test "x$with_windows_dlls" = "xauto" || test "x$with_windows_dlls" = "x"; then
-	with_windows_dlls="/target/bin"
+if test "x$with_windows_sysroot" = "xauto" || test "x$with_windows_sysroot" = "x"; then
+	with_windows_sysroot="/mingw32"
+fi
+WINDOWS_SYSROOT="$with_windows_sysroot";
+
+WINDOWS_SUFFIX="";
+if test "x$app_cv_target_os_kernel" = "xwindows32"; then
+	WINDOWS_SUFFIX="win32"
+elif test "x$app_cv_target_os_kernel" = "xwindows64"; then
+	WINDOWS_SUFFIX="win64"
 fi
-WINDOWS_DLLS_LOCATION="$with_windows_dlls";
 
 AC_SUBST(NSIS_EXEC)
-AC_SUBST(WINDOWS_DLLS_LOCATION)
+AC_SUBST(WINDOWS_SYSROOT)
+AC_SUBST(WINDOWS_SUFFIX)
 
 
 # -------------------------------------------------------------------------------------
@@ -304,13 +292,31 @@ AC_SUBST(WINDOWS_DLLS_LOCATION)
 # -------------------------------------------------------------------------------------
 
 
-RES_FILES="src/res/gsc_about_dialog.glade \
-	src/res/gsc_executor_log_window.glade \
-	src/res/gsc_help_window.glade \
-	src/res/gsc_info_window.glade \
-	src/res/gsc_main_window.glade \
-	src/res/gsc_preferences_window.glade \
-	src/res/gsc_text_window.glade \
+# Win32 security manifest support
+
+WINDOWS_ARCH=""
+if test "x$app_cv_target_os_kernel" = "xwindows32"; then
+	WINDOWS_ARCH="x86"
+elif test "x$app_cv_target_os_kernel" = "xwindows64"; then
+	WINDOWS_ARCH="amd64"
+fi
+
+AC_SUBST(WINDOWS_ARCH)
+
+
+# -------------------------------------------------------------------------------------
+
+# -------------------------------------------------------------------------------------
+
+
+RES_FILES="src/res/gsc_about_dialog.ui \
+	src/res/gsc_add_device_window.ui \
+	src/res/gsc_executor_log_window.ui \
+	src/res/gsc_help_window.ui \
+	src/res/gsc_info_window.ui \
+	src/res/gsc_main_window.ui \
+	src/res/gsc_preferences_window.ui \
+	src/res/gsc_text_window.ui \
 	AUTHORS.txt  LICENSE_gsmartcontrol.txt README.txt"
 
 # Unfortunately, _SOURCES can't contain substitutions, so we use LIBADD.
@@ -318,11 +324,6 @@ RES_LIBADD=""  # .o file to put into .a, libres_a_LIBADD, libres_a_DEPENDENCIES.
 RES_DIST=""  # only files in "res" directory, EXTRA_DIST
 RES_TARGETS=""  # entry for each file in makefile
 
-RES_GLD_EXT="glade"
-if test "$app_cv_gld_reader" = "gtkbuilder"; then
-	RES_GLD_EXT="ui"
-fi
-
 for RES_FILE in $RES_FILES;
 do  # on separate line for portability
 	RES_BASE=`echo "$RES_FILE" | sed 's/.*\///'`  # "a/b/c" -> "c", "c" -> "c"
@@ -338,28 +339,14 @@ do  # on separate line for portability
 		RES_FILE_CANON="\$(srcdir)/$RES_BASE"  # shorter path, better make behaviour
 	fi
 
-	# We use separate source files for gtkbuilder and libglademm, because
-	# make dist should be able to bundle both of them separately.
-
-	if test "$RES_BASE_EXT" = "glade"; then
-
-		RES_LIBADD="$RES_LIBADD $RES_BASE_NOEXT.$RES_GLD_EXT.$ac_objext"  # file.ui.o or file.glade.o
-
-		# Output both glade and ui rules. This way make dist will be able
-		# to build cpp files of both of them.
-
+	if test "$RES_BASE_EXT" = "ui"; then
+		RES_LIBADD="$RES_LIBADD $RES_BASE_NOEXT.ui.$ac_objext"  # file.ui.o or file.glade.o
 		RES_TARGETS="$RES_TARGETS
 $RES_BASE_NOEXT.ui.cpp: $RES_FILE_CANON
-	gtk-builder-convert \"$RES_FILE_CANON\" \"$RES_BASE_NOEXT\".tmp_ui
-	\"\$(top_srcdir)/file2csource.sh\" \"$RES_BASE_NOEXT\".tmp_ui \"$RES_BASE_NOEXT.ui.cpp\" \"$RES_BASE_NOEXT\"_ui
-"
-		RES_TARGETS="$RES_TARGETS
-$RES_BASE_NOEXT.glade.cpp: $RES_FILE_CANON
-	\"\$(top_srcdir)/file2csource.sh\" \"$RES_FILE_CANON\" \"$RES_BASE_NOEXT.glade.cpp\" \"$RES_BASE_NOEXT\"_ui
+	\"\$(top_srcdir)/file2csource.sh\" \"$RES_FILE_CANON\" \"$RES_BASE_NOEXT.ui.cpp\" \"$RES_BASE_NOEXT\"_ui
 "
 
 	else  # txt, etc...
-
 		SRC_FILE="$RES_BASE.cpp"
 		RES_LIBADD="$RES_LIBADD $RES_BASE.$ac_objext"  # file.txt.o
 
@@ -391,7 +378,8 @@ _AM_SUBST_NOTMAKE([RES_TARGETS])
 
 ADDITIONAL_FLAGS="-DPACKAGE_PKGDATA_DIR=\"\\\"\$(pkgdatadir)\\\"\" \
 -DPACKAGE_SYSCONF_DIR=\"\\\"\$(sysconfdir)\\\"\" \
--DTOP_SRC_DIR=\"\\\"\$(top_srcdir)\\\"\""
+-DTOP_SRC_DIR=\"\\\"\$(top_srcdir)\\\"\" \
+-DHZ_USE_GLOBAL_MACROS=1"
 
 #CFLAGS="$CFLAGS $ADDITIONAL_FLAGS"
 CXXFLAGS="$CXXFLAGS $ADDITIONAL_FLAGS"
@@ -404,17 +392,18 @@ CXXFLAGS="$CXXFLAGS $ADDITIONAL_FLAGS"
 # Add pcrecpp too, because its files use #<file> on each other.
 ADDITIONAL_INCLUDES="-I\$(top_builddir) -I\$(top_srcdir)/src -I\$(top_srcdir)/src/pcrecpp"
 
-# -include works with gcc, intel and pathscale, but doesn't work with sun and pgi.
+# -include works with gcc, intel, pathscale and sunstudio since 12u1, but doesn't work
+# with pgi and older sunstudio (the one in solaris10, for example).
 # Note: some gcc-frontend-based compilers may have to be added here
 # (e.g. gccfss (gcc frontend / sun backend), etc...).
-if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "intel" \
-		|| test "$ax_cv_cxx_compiler_vendor" = "pathscale"; then
-	# This auto-includes this file when compiling any file. Benefits include pch support.
-	ADDITIONAL_INCLUDES="$ADDITIONAL_INCLUDES -include global_macros.h"
-else  # sun, pgi, others...
-	# This forces the file to be included manually.
-	ADDITIONAL_INCLUDES="$ADDITIONAL_INCLUDES -DHZ_NO_COMPILER_AUTOINCLUDE"
-fi
+# We use -include only when using pch.
+# if test "x$app_cv_compiler_gcc_pch" = "xyes"; then
+# 	if test "$ax_cv_cxx_compiler_vendor" = "gnu" || test "$ax_cv_cxx_compiler_vendor" = "clang" \
+# 			|| test "$ax_cv_cxx_compiler_vendor" = "intel" || test "$ax_cv_cxx_compiler_vendor" = "pathscale"; then
+# 		# This auto-includes this file when compiling any file. Benefits include pch support.
+# 		ADDITIONAL_INCLUDES="$ADDITIONAL_INCLUDES -include global_macros.h"
+# 	fi
+# fi
 
 # our flags must be before all the others
 #CFLAGS="$ADDITIONAL_INCLUDES $CFLAGS"
@@ -484,10 +473,10 @@ AC_SUBST(AUTODIRS)
 # -------------------------------------------------------------------------------------
 
 
-AC_CONFIG_FILES([ data/gsmartcontrol.desktop \
+AC_CONFIG_FILES([ data/gsmartcontrol.desktop data/gsmartcontrol.appdata.xml \
 	data/nsis/distribution.txt data/nsis/gsmartcontrol.nsi \
 	debian.dist/changelog \
-	src/gsc_winres.rc \
+	src/gsc_winres.rc src/gsmartcontrol.exe.manifest \
 	gsmartcontrol.spec version compilation_flags ])
 
 

contrib/cron-based_noadmin/cron_gather_smart.sh

@@ -1,9 +1,9 @@
 #!/bin/bash
 ############################################################################
 # Copyright:
-#      (C) 2008  Alex Butcher <alex dot butcher 'at' assursys.co.uk>
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
-# License: See LICENSE_whatever.txt file
+#      (C) 2008 - 2010  Alex Butcher <alex dot butcher 'at' assursys.co.uk>
+#      (C) 2008 - 2010  Alexander Shaduri <ashaduri 'at' gmail.com>
+# License: See LICENSE_unlicense.txt file
 ############################################################################
 
 device="$1";

contrib/cron-based_noadmin/smartctl_subst.sh

@@ -1,9 +1,9 @@
 #!/bin/bash
 ############################################################################
 # Copyright:
-#      (C) 2008  Alex Butcher <alex dot butcher 'at' assursys.co.uk>
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
-# License: See LICENSE_whatever.txt file
+#      (C) 2008 - 2010  Alex Butcher <alex dot butcher 'at' assursys.co.uk>
+#      (C) 2008 - 2010  Alexander Shaduri <ashaduri 'at' gmail.com>
+# License: See LICENSE_unlicense.txt file
 ############################################################################
 
 if [ "$1" = "-V" ]; then

data/Makefile.am

@@ -1,12 +1,23 @@
 
 SUBDIRS = 16 22 24 32 48 64 128 256 nsis
 
+
+dist_man_MANS = gsmartcontrol.1
+
+install-extra-mans:
+	cd $(DESTDIR)$(mandir)/man1 && $(LN_S) -f gsmartcontrol.1 gsmartcontrol-root.1
+
+uninstall-extra-mans:
+	cd $(DESTDIR)$(mandir)/man1 && rm -f gsmartcontrol-root.1
+
+
 # This command is needed if installing with make install (the cache
 # file is ignored for rpms).
-gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor
+gtk_update_icon_cache = gtk-update-icon-cache-3.0 -f -t $(datadir)/icons/hicolor
+
+install-data-hook: install-extra-mans update-icon-cache
+uninstall-hook: uninstall-extra-mans update-icon-cache
 
-install-data-hook: update-icon-cache
-uninstall-hook: update-icon-cache
 update-icon-cache:
 	@-if test -z "$(DESTDIR)"; then \
 		echo "Updating GTK icon cache."; \
@@ -29,6 +40,10 @@ appdata_DATA = icon_cddvd.png icon_hdd.png
 desktopdir = $(datadir)/applications
 desktop_DATA = gsmartcontrol.desktop
 
+# Appdata files
+metainfodir = $(datadir)/metainfo
+metainfo_DATA = gsmartcontrol.appdata.xml
+
 
 # Application pixmap (fallback icon for desktop files).
 # Same as 48/gsmartcontrol.png.

data/gsmartcontrol-root.in

@@ -0,0 +1,161 @@
+#!/usr/bin/env bash
+############################################################################
+# Copyright:
+#      (C) 2008 - 2014  Alexander Shaduri <ashaduri 'at' gmail.com>
+# License: See LICENSE_zlib.txt file
+############################################################################
+
+# Run gsmartcontrol with root, asking for root password first.
+# export GSMARTCONTROL_SU to override a su command (e.g. "kdesu -c").
+
+EXEC_BIN="@prefix@/bin/gsmartcontrol";
+prog_name="gsmartcontrol"
+
+
+# Preserve quotes in arguments
+final_args_quoted="";
+for i in "$@";do
+    final_args_quoted="$final_args_quoted \"${i//\"/\\\"}\"";
+done;
+
+
+DESKTOP="auto";
+
+# Compatibility with old syntax:
+# gsmartcontrol-root [<desktop> [program_options]]
+if [ "$1" == "auto" ] || [ "$1" == "kde" ] || [ "$1" == "gnome" ] || [ "$1" == "other" ]; then
+	DESKTOP="$1";
+	shift;  # remove $1
+else
+	# New syntax:
+	# gsmartcontrol-root [--desktop=<auto|kde|gnome|other>] [program_options]
+
+	for arg in $*; do
+		case $arg in
+			--desktop=*)
+				DESKTOP="${arg#*=}";
+				final_args_quoted="${final_args_quoted/\"$arg\"/}";
+				;;
+			*)
+				# unknown option
+				;;
+		esac
+	done
+fi
+
+if [ "$DESKTOP" != "auto" ] && [ "$DESKTOP" != "kde" ] && \
+		[ "$DESKTOP" != "gnome" ] && [ "$DESKTOP" != "other" ]; then
+	echo "Usage: $0 [--desktop=<auto|kde|gnome|other>] [<${prog_name}_options>]";
+	exit 1;
+fi
+
+
+# Auto-detect current desktop if auto was specified.
+if [ "$DESKTOP" = "auto" ]; then
+	# KDE_SESSION_UID is present on kde3 and kde4.
+	# Note that it may be empty (but still set)
+	if [ "${KDE_SESSION_UID+set}" = "set" ]; then
+		DESKTOP="kde";
+	# same with gnome
+	elif [ "${GNOME_DESKTOP_SESSION_ID+set}" = "set" ]; then
+		DESKTOP="gnome";
+	else
+		DESKTOP="other";
+	fi
+fi
+
+# echo $DESKTOP;
+
+
+
+
+
+# They're basically the same, only the order is different.
+# sux requires xterm to ask for the password.
+# xdg-su is basically like this script, except worse :)
+# su-to-root is a debian/ubuntu official method (although gksu is available).
+gnome_sus="su-to-root gnomesu gksu kdesu beesu xdg-su sux";
+kde_sus="su-to-root kdesu gnomesu gksu beesu xdg-su sux";
+other_sus="$gnome_sus";
+
+
+candidates="";
+found_su=""
+
+if [ "$DESKTOP" = "gnome" ]; then
+	candidates="$gnome_sus";
+elif [ "$DESKTOP" = "kde" ]; then
+	candidates="$kde_sus";
+elif [ "$DESKTOP" = "other" ]; then
+	candidates="$other_sus";
+fi
+
+if [ "$GSMARTCONTROL_SU" = "" ]; then
+	for subin in $candidates; do
+		which $subin &>/dev/null
+		if [ $? -eq 0 ]; then
+			found_su="$subin";
+			break;
+		fi
+	done
+
+	if [ "$found_su" = "" ]; then
+		xmessage "Error launching ${prog_name}: No suitable su mechanism found.
+Try installing kdesu, gnomesu, gksu, beesu or sux first.";
+		exit 1;
+	fi
+fi
+
+
+# gnomesu and gksu (but not kdesu, not sure about others) fail to adopt
+# root's PATH. Since the user's PATH may not contain /usr/sbin (with smartctl)
+# on some distributions (e.g. mandriva), add it manually. We also add
+# /usr/local/sbin, since that's the default location of custom-compiled smartctl.
+# Add these directories _before_ existing PATH, so that the user is not
+# tricked into running it from some other path (we're running as root with
+# the user's env after all).
+# Add @prefix@/sbin as well (freebsd seems to require it).
+# Note that beesu won't show a GUI login box if /usr/sbin is before /usr/bin,
+# so add it first as well.
+EXTRA_PATHS="/usr/bin:/usr/sbin:/usr/local/sbin:@prefix@/sbin";
+export PATH="$EXTRA_PATHS:$PATH"
+
+
+# echo $found_su;
+
+# Examples:
+# gnomesu -c 'gsmartcontrol --no-scan'
+# kdesu -c 'gsmartcontrol --no-scan'
+# beesu -P 'gsmartcontrol --no-scan'
+# su-to-root -X -c 'gsmartcontrol --no-scan'
+# xterm -e sux -c 'gsmartcontrol --no-scan'  # sux asks for password in a terminal
+
+
+full_cmd="";
+
+if [ "$GSMARTCONTROL_SU" != "" ]; then
+	full_cmd="$GSMARTCONTROL_SU '$EXEC_BIN $final_args_quoted'";
+
+elif [ "$found_su" = "sux" ]; then
+	full_cmd="xterm -e sux -c '$EXEC_BIN $final_args_quoted'";
+
+elif [ "$found_su" = "gksu" ]; then
+	full_cmd="$found_su '$EXEC_BIN $final_args_quoted'";
+
+elif [ "$found_su" = "beesu" ]; then
+	full_cmd="$found_su -P '$EXEC_BIN $final_args_quoted'";
+
+elif [ "$found_su" = "su-to-root" ]; then
+	full_cmd="$found_su -X -c '$EXEC_BIN $final_args_quoted'";
+
+else  # gnomesu, kdesu, xdg-su
+	full_cmd="$found_su -c '$EXEC_BIN $final_args_quoted'";
+fi
+
+
+# echo $full_cmd
+eval $full_cmd
+
+
+
+

data/gsmartcontrol.1

@@ -0,0 +1,81 @@
+.TH GSmartControl "1" "" "gsmartcontrol " "User Commands"
+.SH NAME
+GSmartControl \- Hard disk drive and SSD health inspection tool
+.SH SYNOPSIS
+\fBgsmartcontrol\fP [OPTIONS]
+
+\fBgsmartcontrol\-root\fP [--desktop=\fI<desktop>\fP] [OPTIONS]
+.SH DESCRIPTION
+\fBGSmartControl\fP is a graphical user interface for smartctl (from
+smartmontools), which is a tool for querying and controlling SMART
+(Self-Monitoring, Analysis, and Reporting Technology) data on modern hard disk
+and solid-state drives. It allows you to inspect the drive's SMART data to
+determine its health, as well as run various tests on it.
+.PP
+This manual page documents briefly the \fBgsmartcontrol\fP and
+\fBgsmartcontrol\-root\fP commands.
+.PP
+\fBgsmartcontrol\-root\fP command launches \fBgsmartcontrol\fP with
+administrative privileges. The \fIdesktop\fP argument specifies which desktop
+is currently running, for automatic selection of native su mechanism. Valid
+values for \fIdesktop\fP are \fBauto\fP, \fBkde\fP, \fBgnome\fP, \fBother\fP.
+
+.SH OPTIONS
+.SS "Help Options:"
+.TP
+\fB\-?\fP, \fB\-\-help\fP
+Show help options
+.TP
+\fB\-\-help\-all\fP
+Show all help options
+.TP
+\fB\-\-help\-gtk\fP
+Show GTK+ options
+.TP
+\fB\-\-help\-debug\fR
+Show logging options
+.SS "Application Options:"
+.TP
+\fB\-l\fP, \fB\-\-no\-locale\fP
+Don't use system locale
+.TP
+\fB\-V\fP, \fB\-\-version\fP
+Display version information
+.TP
+\fB\-\-no\-scan\fP
+Don't scan devices on startup
+.TP
+\fB\-\-no\-hide\-tabs\fP
+Don't hide non\-identity tabs when SMART is disabled. Useful for debugging.
+.TP
+\fB\-\-add\-virtual\fP
+Load smartctl data from file, creating a virtual drive. You
+can specify this option multiple times.
+.TP
+\fB\-\-add\-device\fP
+Add this device to device list. The format of the device is
+\fI<device>::<type>::<extra_args>\fP, where type and extra_args are optional.
+This option is useful with \fB\-\-no\-scan\fP to list certain drives only. You
+can specify this option multiple times. Example:\fR
+.nf
+\-\-add\-device /dev/sda \-\-add\-device /dev/twa0::3ware,2 \-\-add\-device '/dev/sdb::::-T permissive'
+.fi
+.TP
+\fB\-\-display\fP=\fIDISPLAY\fP
+X display to use
+.TP
+\fB\-v\fP, \fB\-\-verbose\fP
+Enable verbose logging; same as \fB\-\-verbosity\-level\fP 5
+.TP
+\fB\-q\fP, \fB\-\-quiet\fP
+Disable logging; same as \fB\-\-verbosity\-level\fP 0
+.TP
+\fB\-b\fP, \fB\-\-verbosity\-level\fP
+Set verbosity level [0\-5]
+.PP
+.SH COPYRIGHT
+Copyright \(co 2008 \- 2012  Alexander Shaduri <ashaduri \'at\' gmail.com>
+.PP
+.SH AUTHOR
+This manual page was originally written by Giuseppe Iuculano
+<giuseppe@iuculano.it> for the Debian project.

data/gsmartcontrol.appdata.xml.in

@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- Copyright 2017 GSmartControl developers -->
+<component type="desktop">
+	<id>gsmartcontrol</id>
+	<metadata_license>CC0-1.0</metadata_license>
+	<project_license>GPL-2.0 and GPL-3.0</project_license>
+	<name>GSmartControl</name>
+	<summary>Hard Disk and SSD Health Inspection</summary>
+	<description>
+		<p>
+			GSmartControl is a graphical user interface for smartctl, which is a tool for
+			querying and controlling SMART (Self-Monitoring, Analysis, and Reporting
+			Technology) data in hard disk and solid-state drives. It allows you to inspect
+			the drive's SMART data to determine its health, as well as run various tests
+			on it.
+		</p>
+	</description>
+	<launchable type="desktop-id">gsmartcontrol.desktop</launchable>
+	<url type="homepage">http://gsmartcontrol.sourceforge.net</url>
+	<screenshots>
+		<screenshot type="default">
+			<caption>Main window</caption>
+			<image>http://gsmartcontrol.sourceforge.net/home/images/main_ok.png</image>
+		</screenshot>
+		<screenshot>
+			<caption>Drive identity information</caption>
+			<image>http://gsmartcontrol.sourceforge.net/home/images/info_identity.png</image>
+		</screenshot>
+		<screenshot>
+			<caption>Attribute list of a failing drive</caption>
+			<image>http://gsmartcontrol.sourceforge.net/home/images/info_failing.png</image>
+		</screenshot>
+	</screenshots>
+</component>

data/gsmartcontrol.desktop.in

@@ -8,9 +8,9 @@ Categories=System;Monitor;
 
 Name=GSmartControl
 # short description, usually shown in parentheses after Name
-GenericName=Hard Disk Health Inspection
+GenericName=Hard Disk and SSD Health Inspection
 # tooltip
-Comment=Monitor and control SMART data on hard disks
+Comment=Monitor and control SMART data on hard disk and solid-state drives
 
 # If it's a name only, it looks for "name.[png|xpm]" file in
 # $XDG_DATA_DIRS/icons and /usr/share/pixmaps.
@@ -24,6 +24,3 @@ Icon=gsmartcontrol
 
 # Run with root permissions.
 Exec="@prefix@/bin/gsmartcontrol-root"
-
-# Build service rpmlint gives errors without this
-X-SuSE-translate=false

data/nsis/distribution.txt.in

@@ -0,0 +1,24 @@
+
+GSmartControl - Hard disk drive and SSD health inspection tool
+Version @VERSION@
+
+The latest version of this distribution, as well as the source code of
+GSmartControl, can be found at
+http://gsmartcontrol.sourceforge.net
+and
+https://sourceforge.net/projects/gsmartcontrol/files/
+
+
+This distribution includes:
+
+* GSmartControl binary (gsmartcontrol.exe) and associated resources.
+The binary was compiled against Gtkmm (http://www.gtkmm.org/), GTK+
+(http://gtk.org/) and related libraries, and PCRE (http://www.pcre.org/).
+
+* Smartctl binaries (from smartmontools 6.5, http://smartmontools.sf.net/)
+- smartctl-nc.exe (compiled without console output), smartctl.exe (compiled
+with console output), update-smart-drivedb.exe (drive database updater).
+
+
+The combined distribution is multi-licensed under GNU GPL versions 2 and 3.
+See LICENSE_gpl2.txt and LICENSE_gpl3.txt for details.

data/nsis/gsmartcontrol.nsi.in

@@ -0,0 +1,319 @@
+
+; NSIS2 Script
+; by Alexander Shaduri <ashaduri 'at' gmail.com>.
+; Compatible with NSIS Unicode 2.45.
+; Public Domain
+
+!define PRODUCT_VERSION "@VERSION@"
+!define PRODUCT_NAME "GSmartControl"
+!define PRODUCT_NAME_SMALL "gsmartcontrol"
+!define PRODUCT_PUBLISHER "Alexander Shaduri"
+!define PRODUCT_WEB_SITE "http://gsmartcontrol.sourceforge.net"
+
+;!define PRODUCT_DIR_REGKEY "Software\Microsoft\Windows\CurrentVersion\App Paths\AppMainExe.exe"
+!define PRODUCT_UNINST_KEY "Software\Microsoft\Windows\CurrentVersion\Uninstall\${PRODUCT_NAME}"
+!define PRODUCT_UNINST_ROOT_KEY "HKLM"
+
+
+!include "FileFunc.nsh"  ; GetOptions
+
+
+
+; --------------- General Settings
+
+
+; This is needed for proper start menu item manipulation (for all users) in vista
+RequestExecutionLevel admin
+
+; This compressor gives us the best results
+SetCompressor /SOLID lzma
+
+; Do a CRC check before installing
+CRCCheck On
+
+; This is used in titles
+Name "${PRODUCT_NAME}"  ;  ${PRODUCT_VERSION}
+
+; Output File Name
+OutFile "${PRODUCT_NAME_SMALL}-${PRODUCT_VERSION}-@WINDOWS_SUFFIX@.exe"
+
+
+; The Default Installation Directory:
+; Try to install to the same directory as runtime.
+InstallDir "$PROGRAMFILES64\${PRODUCT_NAME}"
+; If already installed, try here
+InstallDirRegKey HKLM "SOFTWARE\${PRODUCT_NAME}" "InstallationDirectory"
+
+
+ShowInstDetails show
+ShowUnInstDetails show
+
+
+
+
+
+; --------------------- MUI INTERFACE
+
+; MUI 2.0 compatible install
+!include "MUI2.nsh"
+!include "InstallOptions.nsh"  ; section description macros
+
+; Backgound Colors. uncomment to enable fullscreen.
+; BGGradient 0000FF 000000 FFFFFF
+
+; MUI Settings
+!define MUI_ABORTWARNING
+!define MUI_ICON "nsi_install.ico"
+!define MUI_UNICON "nsi_uninstall.ico"
+
+
+; Things that need to be extracted on first (keep these lines before any File command!).
+; Only useful for BZIP2 compression.
+;!insertmacro MUI_RESERVEFILE_LANGDLL
+;!insertmacro MUI_RESERVEFILE_INSTALLOPTIONS
+
+
+; Language Selection Dialog Settings
+;!define MUI_LANGDLL_REGISTRY_ROOT "${PRODUCT_UNINST_ROOT_KEY}"
+;!define MUI_LANGDLL_REGISTRY_KEY "${PRODUCT_UNINST_KEY}"
+;!define MUI_LANGDLL_REGISTRY_VALUENAME "NSIS:Language"
+
+!define LICENSE_FILE "doc\distribution.txt"
+
+; Pages to show during installation
+!insertmacro MUI_PAGE_WELCOME
+!insertmacro MUI_PAGE_LICENSE "${LICENSE_FILE}"
+!insertmacro MUI_PAGE_DIRECTORY
+!insertmacro MUI_PAGE_INSTFILES
+
+;!define MUI_FINISHPAGE_RUN "$INSTDIR\gsmartcontrol.exe"
+;!define MUI_FINISHPAGE_SHOWREADME "$INSTDIR\Example.file"
+;!define MUI_FINISHPAGE_RUN_NOTCHECKED
+!define MUI_FINISHPAGE_NOAUTOCLOSE
+!define MUI_FINISHPAGE_NOREBOOTSUPPORT
+!insertmacro MUI_PAGE_FINISH
+
+
+
+; Uninstaller page
+!insertmacro MUI_UNPAGE_CONFIRM
+!insertmacro MUI_UNPAGE_INSTFILES
+
+
+
+; Language files
+!insertmacro MUI_LANGUAGE "English"
+
+
+; --------------- END MUI
+
+LangString TEXT_IO_TITLE ${LANG_ENGLISH} "GSmartControl"
+
+
+var install_option_removeold  ; uninstall the old version first (if present): yes (default), no.
+
+
+
+; ----------------- INSTALLATION TYPES
+
+; InstType "Recommended"
+; InstType "Full"
+; InstType "Minimal"
+
+
+
+
+Section "!GSmartControl" SecMain
+SectionIn 1 RO
+	SetShellVarContext all  ; use all user variables as opposed to current user
+	SetOutPath "$INSTDIR"
+
+	SetOverwrite Off ; don't overwrite the config file
+	; File "gsmartcontrol.conf"
+
+	SetOverwrite On
+	File *.exe
+	File *.dll
+	File gsmartcontrol.exe.manifest
+	File gsmartcontrol.ico
+	File icon_*.png
+	File drivedb.h
+
+	; Include the "doc" directory completely.
+	File /r doc
+
+	; GTK and stuff
+	File /r etc
+	File /r share
+
+	; Add Shortcuts (this inherits the exe's run permissions)
+	CreateShortCut "$SMPROGRAMS\GSmartControl.lnk" "$INSTDIR\gsmartcontrol.exe" "" \
+		"$INSTDIR\gsmartcontrol.ico" "" SW_SHOWNORMAL "" "GSmartControl - Hard disk drive and SSD health inspection tool"
+
+SectionEnd
+
+
+
+; Executed on installation start
+Function .onInit
+	SetShellVarContext all  ; use all user variables as opposed to current user
+
+	${GetOptions} "$CMDLINE" "/removeold=" $install_option_removeold
+
+	Call PreventMultipleInstances
+
+	Call DetectPrevInstallation
+FunctionEnd
+
+
+
+; ------------------ POST INSTALL
+
+
+Section -post
+	SetShellVarContext all  ; use all user variables as opposed to current user
+
+	WriteRegStr HKLM "SOFTWARE\${PRODUCT_NAME}" "InstallationDirectory" "$INSTDIR"
+	WriteRegStr HKLM "SOFTWARE\${PRODUCT_NAME}" "Vendor" "${PRODUCT_PUBLISHER}"
+
+	WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "DisplayName" "${PRODUCT_NAME}"
+	WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "UninstallString" "$INSTDIR\gsmartcontrol_uninst.exe"
+	WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "InstallLocation" "$INSTDIR"
+	WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "Publisher" "${PRODUCT_PUBLISHER}"
+	WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "DisplayIcon" "$INSTDIR\gsmartcontrol.ico"
+	WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "URLInfoAbout" "${PRODUCT_WEB_SITE}"
+	WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "DisplayVersion" "${PRODUCT_VERSION}"
+	WriteRegDWORD HKLM "${PRODUCT_UNINST_KEY}" "NoModify" 1
+	WriteRegDWORD HKLM "${PRODUCT_UNINST_KEY}" "NoRepair" 1
+
+	; We don't need this, MUI takes care for us
+	; WriteRegStr HKCU "Software\${PRODUCT_NAME}" "Installer Language" $sUAGE
+
+	; write out uninstaller
+	WriteUninstaller "$INSTDIR\gsmartcontrol_uninst.exe"
+
+	; uninstall shortcut
+	;CreateDirectory "$SMPROGRAMS\GSmartControl"
+	;CreateShortCut "$SMPROGRAMS\GSmartControl\Uninstall GSmartControl.lnk" "$INSTDIR\gsmartcontrol_uninst.exe" "" ""
+
+SectionEnd ; post
+
+
+
+
+
+; ---------------- UNINSTALL
+
+
+
+Function un.onUninstSuccess
+	HideWindow
+	MessageBox MB_ICONINFORMATION|MB_OK "$(^Name) was successfully removed from your computer." /SD IDOK
+FunctionEnd
+
+
+
+
+Section Uninstall
+	SetShellVarContext all  ; use all user variables as opposed to current user
+	SetAutoClose false
+
+	; add delete commands to delete whatever files/registry keys/etc you installed here.
+	Delete "$INSTDIR\gsmartcontrol_uninst.exe"
+
+	DeleteRegKey HKLM "SOFTWARE\${PRODUCT_NAME}"
+	DeleteRegKey HKLM "${PRODUCT_UNINST_KEY}"
+
+	Delete "$INSTDIR\*.exe"
+	Delete "$INSTDIR\*.dll"
+	Delete "$INSTDIR\gsmartcontrol.exe.manifest"
+	Delete "$INSTDIR\gsmartcontrol.ico"
+	Delete "$INSTDIR\icon_*.png"
+
+	; update-smart-drivedb may leave these
+	Delete "$INSTDIR\drivedb.h"
+	Delete "$INSTDIR\drivedb.h.*"
+
+	RMDir /r "$INSTDIR\doc"
+
+	; GTK and stuff
+	RMDir /r "$INSTDIR\etc"
+	RMDir /r "$INSTDIR\share"
+
+	; clean up generated stuff
+	Delete "$INSTDIR\*stdout.txt"
+	Delete "$INSTDIR\*stderr.txt"
+
+	RMDir "$INSTDIR"  ; only if empty
+
+	Delete "$SMPROGRAMS\GSmartControl.lnk"
+	;Delete "$SMPROGRAMS\GSmartControl\Uninstall GSmartControl.lnk"
+
+SectionEnd ; end of uninstall section
+
+
+
+; --------------- Helpers
+
+; Detect previous installation
+Function DetectPrevInstallation
+	; if /removeold=no option is given, don't check anything.
+	StrCmp $install_option_removeold "no" old_detect_done
+
+	SetShellVarContext all  ; use all user variables as opposed to current user
+	push $R0
+
+	; detect previous installation
+	ReadRegStr $R0 HKLM "${PRODUCT_UNINST_KEY}" "UninstallString"
+	StrCmp $R0 "" old_detect_done
+
+	MessageBox MB_OKCANCEL|MB_ICONEXCLAMATION \
+		"${PRODUCT_NAME} is already installed. $\n$\nClick `OK` to remove the \
+		previous version or `Cancel` to continue anyway." \
+		/SD IDOK IDOK old_uninst
+		; Abort
+		goto old_detect_done
+
+	; Run the old uninstaller
+	old_uninst:
+		ClearErrors
+		IfSilent old_silent_uninst old_nosilent_uninst
+
+		old_nosilent_uninst:
+			ExecWait '$R0'
+			goto old_uninst_continue
+
+		old_silent_uninst:
+			ExecWait '$R0 /S _?=$INSTDIR'
+
+		old_uninst_continue:
+
+		IfErrors old_no_remove_uninstaller
+
+		; You can either use Delete /REBOOTOK in the uninstaller or add some code
+		; here to remove to remove the uninstaller. Use a registry key to check
+		; whether the user has chosen to uninstall. If you are using an uninstaller
+		; components page, make sure all sections are uninstalled.
+		old_no_remove_uninstaller:
+
+	old_detect_done: ; old installation not found, all ok
+
+	pop $R0
+FunctionEnd
+
+
+
+; Prevent running multiple instances of the installer
+Function PreventMultipleInstances
+	Push $R0
+	System::Call 'kernel32::CreateMutexA(i 0, i 0, t ${PRODUCT_NAME}) ?e'
+	Pop $R0
+	StrCmp $R0 0 +3
+		MessageBox MB_OK|MB_ICONEXCLAMATION "The installer is already running." /SD IDOK
+		Abort
+	Pop $R0
+FunctionEnd
+
+
+
+; eof

debian.dist/control

@@ -0,0 +1,19 @@
+Source: gsmartcontrol
+Section: utils
+Priority: extra
+Homepage: http://gsmartcontrol.sourceforge.net/
+Maintainer: Alexander Shaduri <ashaduriREMOVETHIS@gmail.com>
+Build-Depends: debhelper (>= 5), autotools-dev,
+ libpcre3-dev, libgtkmm-3.0-dev (>= 3.4.0)
+Standards-Version: 3.7.3
+
+Package: gsmartcontrol
+Architecture: any
+#Depends: ${shlibs:Depends}, ${misc:Depends}, smartmontools, menu
+Depends: ${shlibs:Depends}, smartmontools, menu
+Description: Hard disk drive and SSD health inspection tool
+ GSmartControl is a graphical user interface for smartctl (from smartmontools
+ package), which is a tool for querying and controlling SMART
+ (Self-Monitoring, Analysis, and Reporting Technology) data on modern hard
+ disk and solid-state drives. It allows you to inspect the drive's SMART data
+ to determine its  health, as well as run various tests on it.

debian.dist/copyright

@@ -1,11 +1,11 @@
 This package was debianized by Alexander Shaduri <ashaduri 'at' gmail.com> on
 Sat, 15 Nov 2008 00:12:04 +0400.
 
-It was downloaded from <http://gsmartcontrol.berlios.de/>
+It was downloaded from <http://gsmartcontrol.sourceforge.net/>
 
 Copyright:
 
-    Copyright (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+    Copyright (C) 2008 - 2017  Alexander Shaduri <ashaduri 'at' gmail.com>
 
 License:
 
@@ -27,6 +27,6 @@ On Debian systems, the complete text of the GNU General
 Public Licenses can be found in `/usr/share/common-licenses/GPL-2' and
 `/usr/share/common-licenses/GPL-3'.
 
-The Debian packaging is (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com> and
+The Debian packaging is (C) 2008 - 2017  Alexander Shaduri <ashaduri 'at' gmail.com> and
 is licensed under the GPLv2 and GPLv3, see above.
 

debian.dist/menu

@@ -1,4 +1,4 @@
 ?package(gsmartcontrol):needs="X11" section="Applications/System/Hardware"\
   title="GSmartControl" command="/usr/bin/gsmartcontrol-root"\
-  longtitle="Hard Disk Health Inspection"\
+  longtitle="Hard Disk and SSD Health Inspection"\
   icon="/usr/share/pixmaps/gsmartcontrol.xpm"

debian.dist/rules

@@ -25,8 +25,12 @@ endif
 ifneq "$(wildcard /usr/share/misc/config.guess)" ""
 	cp -f /usr/share/misc/config.guess config.guess
 endif
-	./configure --enable-optimize-options=auto --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs"
+	./configure --host=$(DEB_HOST_GNU_TYPE) \
+		--build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man \
+		--infodir=\$${prefix}/share/info CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs"
 
+# Add --enable-optimize-options=auto to configure line
+# for optimized build (may not work on older gcc versions).
 
 build: build-stamp
 
@@ -42,7 +46,7 @@ build-stamp:  config.status
 clean:
 	dh_testdir
 	dh_testroot
-	rm -f build-stamp 
+	rm -f build-stamp
 
 	# Add here commands to clean up after the build process.
 	-$(MAKE) clean
@@ -72,7 +76,7 @@ binary-arch: build install
 #	dh_installexamples
 #	dh_install
 	dh_installmenu
-#	dh_installdebconf	
+#	dh_installdebconf
 #	dh_installlogrotate
 #	dh_installemacsen
 #	dh_installpam
@@ -81,7 +85,7 @@ binary-arch: build install
 #	dh_installinit
 #	dh_installcron
 #	dh_installinfo
-#	dh_installman
+	dh_installman
 	dh_link
 	dh_strip
 	dh_compress
@@ -95,4 +99,4 @@ binary-arch: build install
 	dh_builddeb
 
 binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install 
+.PHONY: build clean binary-indep binary-arch binary install

doxy_main_page.h

@@ -0,0 +1,35 @@
+/**************************************************************************
+ Copyright:
+      (C) 2012  Alexander Shaduri <ashaduri 'at' gmail.com>
+ License: See LICENSE_gsmartcontrol.txt
+***************************************************************************/
+
+// This file is for generating documentation only. Do NOT include it.
+/// \file
+/// \author Alexander Shaduri
+
+/**
+\mainpage GSmartControl Index
+
+
+\section intro_section Introduction
+This is GSmartControl internal documentation.
+*/
+
+// Group definitions and titles.
+
+/**
+\addtogroup applib Application-Specific Components
+\addtogroup applib_tests Tests of Application-Specific Components
+\addtogroup hz HZ Common System Components
+\addtogroup hz_tests Tests for HZ Common System Components
+\addtogroup libdebug LibDebug Flexible Debug Logging
+\addtogroup libdebug_tests Tests for LibDebug Flexible Debug Logging
+\addtogroup rmn Resource Manager
+\addtogroup rmn_tests Tests for Resource Manager
+\addtogroup rconfig Resource Manager-Based Configuration
+\addtogroup rconfig_tests Tests for Resource Manager-Based Configuration
+\addtogroup gsc GSmartControl Application
+*/
+
+

file2csource.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 ############################################################################
 # Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
+#      (C) 2008 - 2012  Alexander Shaduri <ashaduri 'at' gmail.com>
 # License: See LICENSE_zlib.txt file
 ############################################################################
 

gsmartcontrol.kdev4

@@ -0,0 +1,3 @@
+[Project]
+Manager=KDevCustomBuildSystem
+Name=gsmartcontrol

gsmartcontrol.kdevelop

@@ -22,7 +22,7 @@
   <kdevautoproject>
     <general>
       <activetarget>src/gsmartcontrol</activetarget>
-      <useconfiguration>win32</useconfiguration>
+      <useconfiguration>open64</useconfiguration>
     </general>
     <run>
       <mainprogram>/10/devel/projects/gsmartcontrol/current/gsmartcontrol/debuggy</mainprogram>
@@ -76,7 +76,7 @@
         <f77flags/>
       </optimized>
       <debuggy>
-        <configargs>--disable-user-flags --enable-debug-options --enable-tests</configargs>
+        <configargs>--enable-debug-options --enable-tests</configargs>
         <builddir>debuggy</builddir>
         <ccompiler>kdevgccoptions</ccompiler>
         <cxxcompiler>kdevgppoptions</cxxcompiler>
@@ -87,8 +87,8 @@
         <topsourcedir/>
         <cppflags/>
         <ldflags/>
-        <ccompilerbinary/>
-        <cxxcompilerbinary/>
+        <ccompilerbinary>gcc-4.4</ccompilerbinary>
+        <cxxcompilerbinary>g++-4.4</cxxcompilerbinary>
         <f77compilerbinary/>
         <f77flags/>
       </debuggy>
@@ -102,8 +102,8 @@
         <ccompiler>kdevgccoptions</ccompiler>
         <cxxcompiler>kdevgppoptions</cxxcompiler>
         <f77compiler>kdevg77options</f77compiler>
-        <ccompilerbinary>icc</ccompilerbinary>
-        <cxxcompilerbinary>icpc</cxxcompilerbinary>
+        <ccompilerbinary>icc64</ccompilerbinary>
+        <cxxcompilerbinary>icpc64</cxxcompilerbinary>
         <f77compilerbinary/>
         <cflags/>
         <cxxflags/>
@@ -111,7 +111,7 @@
       </icc>
       <win32>
         <envvars/>
-        <configargs>--disable-user-flags --enable-optimize-options --enable-tests --target=i386-mingw32 --host=i386-mingw32 --build=i686-linux PKG_CONFIG_PATH=/target/lib/pkgconfig PKG_CONFIG_LIBDIR=/target/lib PATH=&quot;/opt/cross-tools/bin:/target/bin:$PATH&quot;</configargs>
+        <configargs>--with-windows-gtk-name=gtk2-runtime-2.16.6-2010-02-24-ash --disable-user-flags --enable-optimize-options --enable-tests --build=i686-linux --host=i386-pc-mingw32 PKG_CONFIG_PATH=/cross/w32/target/lib/pkgconfig PKG_CONFIG_LIBDIR=&quot;&quot; PATH=&quot;/cross/w32/gcc-bin:/cross/w32/target/bin:$PATH&quot;</configargs>
         <builddir>win32</builddir>
         <topsourcedir/>
         <cppflags/>
@@ -119,8 +119,8 @@
         <ccompiler>kdevgccoptions</ccompiler>
         <cxxcompiler>kdevgppoptions</cxxcompiler>
         <f77compiler>kdevg77options</f77compiler>
-        <ccompilerbinary>i386-mingw32-gcc</ccompilerbinary>
-        <cxxcompilerbinary>i386-mingw32-g++</cxxcompilerbinary>
+        <ccompilerbinary>i386-pc-mingw32-gcc</ccompilerbinary>
+        <cxxcompilerbinary>i386-pc-mingw32-g++</cxxcompilerbinary>
         <f77compilerbinary/>
         <cflags/>
         <cxxflags/>
@@ -128,21 +128,21 @@
       </win32>
       <suncc>
         <envvars>
-          <envvar value="/opt/sun/sunstudio12/bin:$PATH" name="PATH" />
+          <envvar value="/opt/sun/sunstudio/bin:$PATH" name="PATH" />
         </envvars>
-        <configargs>--enable-tests</configargs>
+        <configargs>--enable-tests PKG_CONFIG_PATH=&quot;/opt/sun/target64/lib64/pkgconfig:/usr/lib64/pkgconfig&quot; PKG_CONFIG_LIBDIR=&quot;&quot;</configargs>
         <builddir>suncc</builddir>
         <topsourcedir/>
         <cppflags/>
-        <ldflags>-s</ldflags>
+        <ldflags>-R/opt/sun/target64/lib64 -L/opt/sun/target64/lib64</ldflags>
         <ccompiler>kdevgccoptions</ccompiler>
         <cxxcompiler>kdevgppoptions</cxxcompiler>
         <f77compiler>kdevg77options</f77compiler>
         <ccompilerbinary>suncc</ccompilerbinary>
         <cxxcompilerbinary>sunCC</cxxcompilerbinary>
         <f77compilerbinary/>
-        <cflags>-errwarn=%all</cflags>
-        <cxxflags>-DGLIBMM_HAVE_SUN_REVERSE_ITERATOR -DSIGC_HAVE_SUN_REVERSE_ITERATOR</cxxflags>
+        <cflags>-errwarn=%all -I/opt/sun/target64/include</cflags>
+        <cxxflags>-I/opt/sun/target64/include</cxxflags>
         <f77flags/>
       </suncc>
       <portland>
@@ -164,7 +164,7 @@
       </portland>
       <win32-debug>
         <envvars/>
-        <configargs>--disable-user-flags --enable-debug-options --enable-tests --target=i386-mingw32 --host=i386-mingw32 --build=i686-linux PKG_CONFIG_PATH=/target/lib/pkgconfig PKG_CONFIG_LIBDIR=/target/lib PATH=&quot;/opt/cross-tools/bin:/target/bin:$PATH&quot;</configargs>
+        <configargs>--disable-user-flags --enable-debug-options --enable-tests --build=i686-linux --host=i386-pc-mingw32 PKG_CONFIG_PATH=/cross/w32/target/lib/pkgconfig PKG_CONFIG_LIBDIR=&quot;&quot; PATH=&quot;/cross/w32/gcc-bin:/cross/w32/target/bin:$PATH&quot;</configargs>
         <builddir>win32-debug</builddir>
         <topsourcedir/>
         <cppflags/>
@@ -172,13 +172,64 @@
         <ccompiler>kdevgccoptions</ccompiler>
         <cxxcompiler>kdevgppoptions</cxxcompiler>
         <f77compiler>kdevg77options</f77compiler>
-        <ccompilerbinary>i386-mingw32-gcc</ccompilerbinary>
-        <cxxcompilerbinary>i386-mingw32-g++</cxxcompilerbinary>
+        <ccompilerbinary>i386-pc-mingw32-gcc</ccompilerbinary>
+        <cxxcompilerbinary>i386-pc-mingw32-g++</cxxcompilerbinary>
         <f77compilerbinary/>
         <cflags/>
         <cxxflags/>
         <f77flags/>
       </win32-debug>
+      <win64-debug>
+        <envvars/>
+        <configargs>--disable-user-flags --enable-optimize-options --enable-tests --build=i686-linux --host=x86_64-pc-mingw32 PKG_CONFIG_PATH=/cross/w64/target/lib/pkgconfig PKG_CONFIG_LIBDIR=&quot;&quot; PATH=&quot;/cross/w64/gcc-bin:/cross/w64/target/bin:$PATH&quot;</configargs>
+        <builddir>win64-debug</builddir>
+        <topsourcedir/>
+        <cppflags/>
+        <ldflags/>
+        <ccompiler>kdevgccoptions</ccompiler>
+        <cxxcompiler>kdevgppoptions</cxxcompiler>
+        <f77compiler>kdevg77options</f77compiler>
+        <ccompilerbinary>x86_64-pc-mingw32-gcc</ccompilerbinary>
+        <cxxcompilerbinary>x86_64-pc-mingw32-g++</cxxcompilerbinary>
+        <f77compilerbinary/>
+        <cflags/>
+        <cxxflags/>
+        <f77flags/>
+      </win64-debug>
+      <default>
+        <envvars/>
+        <configargs/>
+        <builddir/>
+        <topsourcedir/>
+        <cppflags/>
+        <ldflags/>
+        <ccompiler>kdevgccoptions</ccompiler>
+        <cxxcompiler>kdevgppoptions</cxxcompiler>
+        <f77compiler>kdevg77options</f77compiler>
+        <ccompilerbinary/>
+        <cxxcompilerbinary/>
+        <f77compilerbinary/>
+        <cflags/>
+        <cxxflags/>
+        <f77flags/>
+      </default>
+      <open64>
+        <envvars/>
+        <configargs>--enable-tests</configargs>
+        <builddir>open64</builddir>
+        <topsourcedir/>
+        <cppflags/>
+        <ldflags/>
+        <ccompiler>kdevgccoptions</ccompiler>
+        <cxxcompiler>kdevgppoptions</cxxcompiler>
+        <f77compiler>kdevg77options</f77compiler>
+        <ccompilerbinary>/opt/open64/bin/opencc</ccompilerbinary>
+        <cxxcompilerbinary>/opt/open64/bin/openCC</cxxcompilerbinary>
+        <f77compilerbinary/>
+        <cflags/>
+        <cxxflags>-Wall</cxxflags>
+        <f77flags/>
+      </open64>
     </configurations>
     <make>
       <envvars>

gsmartcontrol.spec.in

@@ -0,0 +1,169 @@
+Name:		gsmartcontrol
+Version: 	@VERSION@
+Release:	1as
+License:	GPL-2.0 AND GPL-3.0
+Url:		http://gsmartcontrol.sourceforge.net/
+Vendor:		Alexander Shaduri <ashaduri 'at' gmail.com>
+# Packager:	Alexander Shaduri <ashaduri 'at' gmail.com>
+Source:		http://sourceforge.net/projects/gsmartcontrol/files/%{version}/%{name}-%{version}.tar.bz2
+BuildRoot:	%{_tmppath}/%{name}-%{version}-build
+Summary:	GSmartControl - Hard Disk Drive and SSD Health Inspection Tool
+
+%if 0%{?mandriva_version}
+Group:		System/Kernel and hardware
+%else
+Group:		Hardware/Other
+%endif
+
+# Empty debug packages cause errors in new RPM. Disable them.
+%global debug_package %{nil}
+
+
+# Dependencies for various distributions. The actual deps are:
+# smartmontools, pcre, gtkmm3 >= 3.4.0
+# (with the respective -devel packages of the libraries for build requirements).
+# For non-specified distributions we don't specify any dependencies to avoid errors.
+
+
+# SUSE / OpenSUSE. SLES also defines the correct suse_version.
+%if 0%{?suse_version}
+
+Requires: smartmontools
+BuildRequires: gcc-c++, libstdc++-devel, pcre-devel, gtkmm3-devel >= 3.4.0
+BuildRequires: update-desktop-files
+BuildRequires: fdupes
+
+%endif
+
+
+# Fedora, CentOS, RHEL
+%if 0%{?fedora_version} || 0%{?rhel_version} || 0%{?centos_version}
+
+# I'm not sure about centos and rhel versions
+Requires: smartmontools
+BuildRequires: gcc-c++, pcre-devel, gtkmm30-devel >= 3.4.0
+
+# Fedora with consolehelper.
+# usermode-gtk is for consolehelper-gtk.
+%if 0%{?fedora_version}
+Requires: usermode-gtk
+%endif
+
+%endif
+
+
+%description
+GSmartControl is a graphical user interface for smartctl, which is a tool for
+querying and controlling SMART (Self-Monitoring, Analysis, and Reporting
+Technology) data in hard disk and solid-state drives. It allows you to inspect
+the drive's SMART data to determine its health, as well as run various tests
+on it.
+
+%prep
+
+%setup -q
+%configure
+
+
+%build
+make %{?_smp_mflags}
+
+
+%install
+
+# %%makeinstall
+make DESTDIR=%buildroot install-strip
+# Remove the icon cache file "make install" generates, to avoid package conflicts.
+rm -f $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/icon-theme.cache
+
+
+%if 0%{?suse_version}
+
+%suse_update_desktop_file -n %{name}
+
+# There are some png file duplicates, hardlink them.
+%fdupes
+
+# We install icons, so this is needed.
+%if 0%{?suse_version} >= 1140
+%post
+%icon_theme_cache_post
+
+%postun
+%icon_theme_cache_postun
+%endif
+
+# endif suse
+%endif
+
+
+%if 0%{?fedora_version}
+# We still retain gsmartcontrol-root for consistency with other distributions.
+
+# Make the desktop file run gsmartcontrol instead of gsmartcontrol-root
+sed "s|gsmartcontrol-root|gsmartcontrol|g" %{buildroot}%{_datadir}/applications/gsmartcontrol.desktop > %{buildroot}%{_datadir}/applications/gsmartcontrol.desktop.new
+mv -f %{buildroot}%{_datadir}/applications/gsmartcontrol.desktop.new %{buildroot}%{_datadir}/applications/gsmartcontrol.desktop
+
+# The rest is taken from the official fedora spec:
+# http://pkgs.fedoraproject.org/cgit/gsmartcontrol.git/tree/
+
+# Set up for console-helper
+mkdir -p %{buildroot}%{_sbindir}
+# Add a copy as "gsmartcontrol-noroot", since gsmartcontrol will always
+# ask for root password.
+cp %{buildroot}%{_bindir}/%{name} %{buildroot}%{_bindir}/%{name}-noroot
+mv %{buildroot}%{_bindir}/%{name} %{buildroot}%{_sbindir}/%{name}
+ln -s consolehelper %{buildroot}%{_bindir}/%{name}
+
+mkdir -p %{buildroot}%{_sysconfdir}/pam.d
+cat <<EOF >%{buildroot}%{_sysconfdir}/pam.d/%{name}
+#%%PAM-1.0
+auth		include		config-util
+account		include		config-util
+session		include		config-util
+EOF
+
+mkdir -p %{buildroot}%{_sysconfdir}/security/console.apps
+cat <<EOF >%{buildroot}%{_sysconfdir}/security/console.apps/%{name}
+USER=root
+PROGRAM=/usr/sbin/gsmartcontrol
+SESSION=true
+EOF
+
+# endif fedora
+%endif
+
+
+%clean
+rm -rf %buildroot
+
+
+%files
+%defattr(-,root,root)
+
+# In fedora /usr/bin/gsmartcontrol is linked to consolehelper, cannot set attrs on symlink.
+%if 0%{?fedora_version}
+%{_bindir}/*
+%else
+%attr(0755,root,root) %{_bindir}/*
+%endif
+
+# %%attr(0644,root,root) %%config(noreplace) %%{_sysconfdir}/*
+
+%doc %{_datadir}/doc/gsmartcontrol
+%doc %{_mandir}/man1/*
+
+%{_datadir}/gsmartcontrol
+# %%{_datadir}/gsmartcontrol/*
+%{_datadir}/applications/*.desktop
+%{_datadir}/metainfo
+%{_datadir}/icons/*
+%{_datadir}/pixmaps/*
+
+%if 0%{?fedora_version}
+%config(noreplace) %{_sysconfdir}/pam.d/%{name}
+%config(noreplace) %{_sysconfdir}/security/console.apps/%{name}
+%{_sbindir}/gsmartcontrol
+%endif
+
+%changelog

gsmartcontrol/LICENSE_whatever.txt

@@ -1,12 +0,0 @@
-Whatever License
-
-THIS SOFTWARE IS PROVIDED 'AS-IS', WITHOUT ANY EXPRESS OR IMPLIED
-WARRANTY.  IN NO EVENT WILL THE AUTHORS BE HELD LIABLE FOR ANY DAMAGES
-ARISING FROM THE USE OF THIS SOFTWARE.
-
-Everyone is permitted to copy and distribute verbatim or modified
-copies of this license document.
-
-Permission is granted to anyone to use this software for any purpose,
-including commercial applications, and to alter it and redistribute it
-freely.

gsmartcontrol/Makefile.am

@@ -1,143 +0,0 @@
-
-# Add autoconf.m4 directory to local macro search path
-ACLOCAL_AMFLAGS = -I autoconf.m4
-
-SUBDIRS = data debian.dist src
-
-
-# These files are actually needed for compilation.
-noinst_DATA = AUTHORS.txt LICENSE_gsmartcontrol.txt README.txt
-
-
-# For the files to be bundled with the distribution, specify them in
-# one of the following.
-
-# These will be installed into docdir.
-# Some of these files are actually needed for compilation (see src/res/Makefile.am).
-dist_doc_DATA = AUTHORS.txt ChangeLog NEWS README.txt \
-	LICENSE_boost_1_0.txt \
-	LICENSE_bsd-ucb.txt \
-	LICENSE_gpl2.txt \
-	LICENSE_gpl3.txt \
-	LICENSE_gsmartcontrol.txt \
-	LICENSE_hz.txt \
-	LICENSE_pcrecpp.txt \
-	LICENSE_whatever.txt \
-	LICENSE_zlib.txt
-
-
-# nobase_ preserves their directory names.
-nobase_dist_doc_DATA = contrib/cron-based_noadmin/README \
-	contrib/cron-based_noadmin/cron_gather_smart.sh \
-	contrib/cron-based_noadmin/crontab.example \
-	contrib/cron-based_noadmin/smartctl_subst.sh
-
-
-# Extra files bundled with distribution.
-# file2csource.sh is needed for building but not installed.
-EXTRA_DIST = COPYING TODO INSTALL configure autogen.sh \
-	baqup gsmartcontrol.kdevelop \
-	templates \
-	file2csource.sh \
-	gsmartcontrol.spec
-
-
-
-# PCH support
-
-global_macros.h.gch: $(top_srcdir)/src/global_macros.h
-	$(CXX) $(CXXFLAGS) $(DEFS) -x "c++-header" $(top_srcdir)/src/global_macros.h -o global_macros.h.gch
-
-gch: global_macros.h.gch
-
-gch-clean:
-	rm -f global_macros.h.gch
-
-
-
-# rpm support
-
-src-rpm: dist
-	rpmbuild -ts $(distdir).tar.bz2
-
-
-# Don't use this - it does something weird, and gcc errors out with "long long long" errors, etc...
-#rpm: dist
-#	rpmbuild -ta $(distdir).tar.bz2
-
-
-
-# NSIS installer support.
-# Requires wine, installed NSIS, gtkmm dlls, pcre dlls, smartctl.exe, smartctl_console.exe.
-# dos2unix on build machine.
-# Execute only with win32 build present.
-
-WIN_ZIP_NAME = $(PACKAGE)-$(VERSION)-win32
-
-win-dist: win-dist-prepare nsis-dist-nocleanup win-zip-dist
-
-win-dist-clean:
-	rm -rf gsmartcontrol-*.exe gsmartcontrol-*.zip nsis-dist $(WIN_ZIP_NAME)
-
-
-win-dist-prepare: all win-dist-clean
-	$(MKDIR_P) nsis-dist
-
-	cp data/nsis/gsmartcontrol.nsi $(top_srcdir)/data/nsis/nsi_* nsis-dist/
-	cp $(top_srcdir)/data/gsmartcontrol.ico $(top_srcdir)/data/icon_*.png nsis-dist/
-
-	$(MKDIR_P) nsis-dist/doc
-	cp data/nsis/distribution.txt nsis-dist/doc/
-	cp $(top_srcdir)/AUTHORS.txt $(top_srcdir)/LICENSE_* $(top_srcdir)/README.txt nsis-dist/doc/
-	cp $(top_srcdir)/NEWS nsis-dist/doc/NEWS.txt
-
-	unix2dos nsis-dist/*.nsi nsis-dist/doc/*.txt
-
-	cp "@WINDOWS_DLLS_LOCATION@"/libatkmm-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/libcairomm-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/libgdkmm-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/libgiomm-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/libglibmm-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/libgtkmm-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/libpangomm-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/libsigc-*.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/pcre3.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/mingwm10.dll nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/smartctl.exe nsis-dist/
-	cp "@WINDOWS_DLLS_LOCATION@"/smartctl_console.exe nsis-dist/
-
-	cp src/gsmartcontrol.exe nsis-dist/
-
-	$(STRIP) nsis-dist/*.exe
-	mv nsis-dist/mingwm10.dll nsis-dist/mingwm10.dll_
-	$(STRIP) --strip-debug --strip-unneeded nsis-dist/*.dll
-	mv nsis-dist/mingwm10.dll_ nsis-dist/mingwm10.dll
-
-
-nsis-dist: nsis-dist-nocleanup nsis-cleanup
-
-nsis-dist-nocleanup: win-dist-prepare
-	cd nsis-dist && @NSIS_EXEC@ gsmartcontrol.nsi
-	mv nsis-dist/$(PACKAGE)-$(VERSION).exe .
-
-nsis-cleanup:
-	rm -rf nsis-dist
-
-
-win-zip-dist: win-zip-dist-nocleanup win-zip-dist-cleanup
-
-win-zip-dist-nocleanup: win-dist-prepare
-	mv nsis-dist $(WIN_ZIP_NAME)
-	rm -rf $(WIN_ZIP_NAME)/gsmartcontrol.ico $(WIN_ZIP_NAME)/nsi_* $(WIN_ZIP_NAME)/*.nsi
-	zip -9r $(WIN_ZIP_NAME).zip $(WIN_ZIP_NAME)
-
-win-zip-dist-cleanup:
-	rm -rf $(WIN_ZIP_NAME)
-
-
-
-
-distclean-local: gch-clean win-dist-clean
-
-
-

gsmartcontrol/NEWS

@@ -1,79 +0,0 @@
-
-Version 0.8.3, released on 2008-12-27
-	A random "Smartctl returned an empty output" error on Windows was fixed.
-		Thanks to Zurab Khetsuriani for testing.
-	Fixed a parser issue which prevented running self-tests in Windows.
-	The supplied icon (hopefully) shows correctly in Windows 2000 now.
-	This release adds an official support for Windows 2000 SP4.
-	Added scripts to allow GSmartControl to read smartctl data from
-		cron-generated files. This allows users to read somewhat recent
-		smartctl information without having to run GSmartControl as root.
-		Generously contributed by Alex Butcher <alex dot butcher 'at'
-		assursys.co.uk>.
-	Configure script correctly aborts instead of printing a warning if gtkmm
-		or libglademm (if needed) is not found.
-	Configure script now accepts --enable-windows-console,
-		--disable-abort-if-no-gtkmm, --disable-abort-if-no-glade-reader,
-		as well as Windows-supporting "auto" for --enable-nsis-wine and
-		--with-nsis.
-	Configure's --with-win32-env has been renamed to --with-windows-dlls.
-	The "About" dialog shows version information now.
-	Minor bugs were fixed.
-
-Version 0.8.2, released on 2008-12-10
-	Fixed gsmartcontrol_root.sh script to support distributions with no
-		/usr/sbin in their users' paths (thanks to Erwan Velu).
-	Added desktop auto-detection to gsmartcontrol_root.sh script. This allows
-		us to use only one desktop file (thanks to Erwan Velu).
-	Added Debian package directory (named "debian.dist" for now to avoid
-		control file conflicts with Build Service).
-	Renamed gsmartcontrol_root.sh to gsmartcontrol-root, to make Debian happy.
-	Added make targets for Windows packages (zip and NSIS).
-	Fixed Windows-related issues (Vista is fully supported now).
-	Fixed minor bugs:
-		Smartctl parser is win32-locale-aware now.
-		No more unnecessary parsing.
-		No segfault on exit under Windows and Solaris.
-		A friendlier message is displayed if smartctl was not found.
-		No highlighted labels when switching tabs in Information window.
-
-Version 0.8.1, released on 2008-11-11
-	Disabled Linux "by-id" drive detection - it's unreliable on some broken
-		systems.
-	Added some more attribute descriptions.
-	Our names for attributes override smartctls' now.
-	Added a proper "Add Device" dialog for Windows.
-	Added an icon and resource file for Windows.
-	Fixed minor bugs.
-
-Version 0.8.0rc4, released on 2008-10-20
-	FreeBSD support (tested with DesktopBSD 1.6 (FreeBSD 6.3) / x86).
-	NetBSD support (tested with NetBSD 4.0.1 / x86).
-	OpenBSD support (tested with OpenBSD 4.3 / x86-64 / gcc-3.3.5).
-	Solaris/gcc support (tested with Solaris 10 / x86 / gcc-3.4.3 / blastwave).
-	Solaris/sunstudio support (tested with Solaris 10 / x86 / sunstudio12 /
-		sunfreeware).
-	Code to support Windows, Mac OS X, QNX.
-	Support of older pcre versions (at least 4.5, maybe older too).
-	Added gsmartcontrol_root.sh script to easily run gsmartcontrol as root.
-	Improved .desktop files.
-	License for tests and examples is legally more correct now.
-	Minor bugfixes.
-
-Version 0.8.0rc3, released on 2008-10-08
-	Added support for udevless Linux distributions by providing a fallback
-		/proc/partitions-based drive detection method. The new method adds
-		support for Linux 2.4 and older systems. Thanks to Paul Marwick for
-		reporting and testing.
-	Fixed invalid error messages with directory-related operations.
-	Fixed invalid verbosity levels of console output of debug messages in
-		non-debug builds.
-	Improved rpm spec file - now supports building on OpenSUSE build
-		service with various distributions as targets.
-
-Version 0.8.0rc2, released on 2008-10-05
-	Fixed compilation under gcc 4.3. Thanks to Peter Linnell for reporting.
-	Removed test data (there's a lot of it and it's unnecessary).
-
-Version 0.8.0rc1, released on 2008-10-01
-	Initial public release.

gsmartcontrol/TODO

@@ -1,138 +0,0 @@
-
-
-GTKMM Notes:
-
-To transfer an ownership from your local code to a container, use
-Gtk::Button* pButton = Gtk::manage(new Gtk::Button("Test"));
-container->add(*pButton);
-(add() takes an object by reference).
-otherwise, you will need to delete() it.
-
-local scope destruction also works if using stack variables.
-{
-	Gtk::Button aButton;
-	// destroyed here
-}
-
-
-A treeview (also iconview, combobox) from glade comes
-with existing model, which should be unset.
-
-
---------------------------------------------------------
-
-portability:
-win32 32-bit: int: 4, long: 4, pointer: 4.
-win32 64-bit: int: 4, long: 8, pointer: 8.
-
-sparc: same as win32 (what about OS?).
-
-
-
---------------------------------------------------------
-
-TODO:
-
-
-Patch pangomm for Pango::strip_markup().
-
-Patch gtkmm, glibmm, pangomm for static win32 builds.
-
-No Gtk::AboutDialog::set_logo(NULL);
-
-
-libdebug:
-	per-channel disabling.
-	per-channel formatting.
-	all flags should be per-channel.
-	bug: if -q is passed, Execution log doesn't contain libdebug log. (requires per-channel status control).
-
-
-
-
-
------------ Feature List ----------
-
-+Autodetect available devices
-
-+Select current device (from autodetected list; manually whitelist devices).
-
-+Smartctl binary (text entries in Options - binary, default command line options).
-+	Global command-line options for smartctl.
-+	Command-line options per-device in settings (e.g. -d ata).
-+	Search smartctl binary on startup (try to execute it with --version). If it's not there, alert the user.
-
-+Indicate which of the devices has SMART supported / enabled.
-+	Enable / disable smart on devices.
-+		Indicate that this is until shutdown (but may be preserved on reboot).
-+	Direct them to smartd / smartctl documentation for permanent enabling.
-+		NOTE: SMART is sometimes preserved across power cycles.
-
-+Enable / disable Automatic Offline Data Collection for devices. (-o on)
-+	Show its status in the main window.
-
-+Show identity information for device (aka short info), --info.
-
-+Show all SMART information for device (--all), includes:
-+	* Short info (--info)
-+	* SMART DATA
-+		* overall-health (-H, --health) - may check this automatically as well.
-+		* General SMART Values, aka Capabilities (-c, --capabilities)
-+		* Attributes (-A, --attributes). These need decoding.
-+		* Error Log (-l error)
-+		* Self-test log (-l selftest)
-+		* Selective self-test log and settings
-		* SCT status and other stuff
-			Display temperature somewhere (use SCT or Attr 194 for this).
-			Which one is updated more frequently, SCT or attr 194?
-+	* Ability to save this information to a file.
-+	* On info window show: Ask to turn SMART on if it's disabled
-
-+Program error reporting:
-+	invalid smartmontools version.
-+	cannot parse output - show log.
-+	smartctl exited with error - look it up in error map.
-
-
-SCT Temperatures (do we use these?)
-	-l scttemp prints temperature and history.
-	-t scttempint,N[,p] (N - count, p - preserve across reset or not).
-		This configures temperature logging interval (1 min by default) and clears the history.
-
-
-+Tests:
-	Ability to detect a testing drive on boot, show its info with testing tab.
-
-	Run one-time Immediate Offline test (-t offline).
-		Offline tests only update Attributes, and if errors are found they will
-		appear in SMART error log. Self-test logs are unaffected.
-		Abort (-X). Abort works with Offline only if there's
-		"Abort Offline collection upon new command" capability.
-		If the drive has "Suspend Offline collection upon new  command" capability,
-		immediate offline test may be tracked through --capabilities (not on mine!).
-		If it's "Abort Offline collection upon new command", then the test
-		will abort on --capabilities or --abort.
-
-
-Polling time
-The self-test routine recommended polling time shall be equal to the number of minutes that is the minimum
-recommended time before which the host should first poll for test completion status. Actual test time could
-be several times this value. Polling before this time could extend the self-test execution time or abort the test
-depending on the state of bit 2 of the off-line data capability bits.
-
-Autosave
-This command enables and disables the optional attribute autosave feature of the device. This command
-may either allow the device, after some vendor specified event, to save the device updated attribute values
-to non-volatile memory; or this command may cause the autosave feature to be disabled. The state of the
-attribute autosave feature (either enabled or disabled) shall be preserved by the device across power cycles.
-A value of zero written by the host into the device’s Sector Count register before issuing this command shall
-cause this feature to be disabled. Disabling this feature does not preclude the device from saving SMART
-data to non-volatile memory during some other normal operation such as during a power-on or power-off
-sequence or during an error recovery sequence.
-A value of F1h written by the host into the device’s Sector Count register before issuing this command shall
-cause this feature to be enabled. Any other meaning of this value or any other non-zero value written by the
-host into this register before issuing this command may differ from device to device. The meaning of any
-non-zero value written to this register at this time shall be preserved by the device across power cycles.
-
-
-

gsmartcontrol/autoconf.m4/app_choose_gld_reader.m4

@@ -1,153 +0,0 @@
-
-############################################################################
-# Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
-# License: See LICENSE_zlib.txt file
-############################################################################
-
-
-# APP_CHOOSE_GLD_READER([C|C++][, flags_prefix])
-# This macro detects whether GtkBuilder (from gtk >= 2.12) or libglade
-# are present. If the first parameter is C++, then gtkmm and libglademm
-# are searched for instead.
-# flags_prefixCFLAGS, flags_prefixCXXFLAGS and flags_prefixLIBS
-# will be initialized (or appended to) with the correct flags in case of libglade(mm).
-# app_cv_gld_reader will be set to none, libglade or gtkbuilder.
-
-# ENABLE_LIBGLADE or ENABLE_GTKBUILDER will be exported to config.h
-
-# You must call AX_COMPILER_VENDOR before using this macro.
-
-AC_DEFUN([APP_CHOOSE_GLD_READER], [
-	# These requirements check compile-time presence, not that they were called
-	AC_REQUIRE([AX_COMPILER_VENDOR])
-
-	AC_ARG_ENABLE(abort-if-no-glade-reader, AS_HELP_STRING([--disable-abort-if-no-glade-reader],
-			[disable abort if no glade file reader is found (default: configure aborts when glade file reader is not found)]),
-		[app_cv_abort_if_no_glade_reader=${enableval}], [app_cv_abort_if_no_glade_reader=yes])
-
-	AC_MSG_NOTICE([Abort if no glade file reader is found: $app_cv_abort_if_no_glade_reader])
-
-	# This is just in case
-	# PKG_PROG_PKG_CONFIG()
-
-	# this variable will have values "none", "libglade" or "gtkbuilder".
-	app_cv_gld_reader="none";
-
-	# in case libglade(mm) is found, these will contain the flags.
-	app_cv_gld_reader_CFLAGS="";
-	app_cv_gld_reader_CXXFLAGS="";
-	app_cv_gld_reader_LIBS="";
-
-	app_cv_gld_reader_libglade_name="libglade";
-	app_cv_gld_reader_libglade_pkg_name="libglade-2.0";
-	app_cv_gld_reader_gtk_name="gtk";
-	app_cv_gld_reader_gtk_pkg_name="gtk+-2.0";
-	if test "x$1" = "xC++"; then
-		app_cv_gld_reader_libglade_name="libglademm";
-		app_cv_gld_reader_libglade_pkg_name="libglademm-2.4";
-		app_cv_gld_reader_gtk_name="gtkmm";
-		app_cv_gld_reader_gtk_pkg_name="gtkmm-2.4";
-	fi
-
-
-	# Manual control. AC_ARG_ENABLE doesn't get bash variables, so we have
-	# to do it this way. If put inside a shell conditional, it still shows up in configure help.
-
-	AC_ARG_ENABLE(libglade, AS_HELP_STRING([--enable-libglade],
-			[use libglade(mm) instead of GtkBuilder (default: auto)]),
-			[with_libglade=${enableval}], [with_libglade=auto])
-
-
-	# Try gtkbuilder first
-	if test "x$with_libglade" = "xno" || test "x$with_libglade" = "xauto"; then
-		PKG_CHECK_EXISTS([$app_cv_gld_reader_gtk_pkg_name >= 2.12.0],
-				[app_cv_gld_reader="gtkbuilder"])
-	fi
-	if test "$with_libglade" = "no" && test "$app_cv_gld_reader" = "none"; then
-		AC_MSG_ERROR([GtkBuilder support not found (you need $app_cv_gld_reader_gtk_name version 2.12 or higher). Try using $app_cv_gld_reader_libglade_name instead.])
-	fi
-
-	# libglade specified, or auto and no gtkbuilder. gtkmm2.4-compatible libglademm is >= 2.4.0.
-	# (not sure about libglade version).
-	if test "x$app_cv_gld_reader" = "xnone"; then
-		if test "x$app_cv_gld_reader_libglade_name" = "xlibglade"; then
-			# libglade
-			PKG_CHECK_MODULES([LIBGLADE], [$app_cv_gld_reader_libglade_pkg_name >= 2.4.0],
-					[app_cv_gld_reader="libglade"], [AC_MSG_WARN([$LIBGLADE_PKG_ERRORS])])
-			app_cv_gld_reader_CFLAGS="$LIBGLADE_CFLAGS";
-			app_cv_gld_reader_CXXFLAGS="$LIBGLADE_CFLAGS";
-			app_cv_gld_reader_LIBS="$LIBGLADE_LIBS";
-		else
-			# libglademm
-			PKG_CHECK_MODULES([LIBGLADEMM], [$app_cv_gld_reader_libglade_pkg_name >= 2.4.0],
-					[app_cv_gld_reader="libglade"], [AC_MSG_WARN([$LIBGLADEMM_PKG_ERRORS])])
-			app_cv_gld_reader_CFLAGS=""
-			app_cv_gld_reader_CXXFLAGS="$LIBGLADEMM_CFLAGS";
-			app_cv_gld_reader_LIBS="$LIBGLADEMM_LIBS";
-		fi
-		# reset them so they don't interfere later
-		LIBGLADE_CFLAGS="";
-		LIBGLADE_LIBS="";
-	fi
-
-	if test "x$with_libglade" = "xyes" && test "x$app_cv_gld_reader" = "xnone"; then
-		AC_MSG_ERROR([$app_cv_gld_reader_libglade_name not found. Try building with GtkBuilder support (you need $app_cv_gld_reader_gtk_name version 2.12 or higher).])
-	fi
-
-	# still not found.
-	if test "$app_cv_gld_reader" = "none"; then
-		if test "x$app_cv_abort_if_no_glade_reader" = "xno"; then
-			AC_MSG_WARN([$LIBGLADE_PKG_ERRORS])
-			AC_MSG_WARN([Neither GtkBuilder nor $app_cv_gld_reader_libglade_name found. The program will be unable to compile fully.])
-		else
-			AC_MSG_WARN([Neither GtkBuilder nor $app_cv_gld_reader_libglade_name found.])
-			AC_MSG_ERROR([$LIBGLADE_PKG_ERRORS])
-		fi
-	fi
-
-
-	# export the flags
-	if test "x$2" != "x"; then
-		if test "x$$2[]CFLAGS" = "x"; then
-			$2[]CFLAGS="$app_cv_gld_reader_CFLAGS";
-		else
-			$2[]CFLAGS="$$2[]CFLAGS $app_cv_gld_reader_CFLAGS";
-		fi
-		if test "x$$2[]CXXFLAGS" = "x"; then
-			$2[]CXXFLAGS="$app_cv_gld_reader_CXXFLAGS";
-		else
-			$2[]CXXFLAGS="$$2[]CXXFLAGS $app_cv_gld_reader_CXXFLAGS";
-		fi
-		if test "x$$2[]LIBS" = "x"; then
-			$2[]LIBS="$app_cv_gld_reader_LIBS";
-		else
-			$2[]LIBS="$$2[]LIBS $app_cv_gld_reader_LIBS";
-		fi
-	fi
-
-
-	# export to automake.am-s
-	AM_CONDITIONAL([ENABLE_LIBGLADE], [test "$app_cv_gld_reader" = "libglade"])
-	AM_CONDITIONAL([ENABLE_GTKBUILDER], [test "$app_cv_gld_reader" = "gtkbuilder"])
-
-
-	# export to config.h
-	if test "$app_cv_gld_reader" = "libglade"; then
-		AC_DEFINE(ENABLE_LIBGLADE, 1, [Use libglade(mm) instead of GtkBuilder])
-	fi
-	if test "$app_cv_gld_reader" = "gtkbuilder"; then
-		AC_DEFINE(ENABLE_GTKBUILDER, 1, [Use GtkBuilder instead of libglademm])
-	fi
-
-	# If we move this to the start, some messages get in between, so we have to have it here.
-	AC_MSG_CHECKING([for glade file support:])
-
-	AC_MSG_RESULT([$app_cv_gld_reader])
-
-])
-
-
-
-
-

gsmartcontrol/baqup

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-stamp="../gsmartcontrol-`date +%F`"
-echo $stamp
-
-mkdir $stamp
-cp -dp * $stamp/
-
-rm -f $stamp/*pcs  # kdevelop persistent store files
-
-cp -a autoconf.m4/ $stamp/
-cp -a data/ $stamp/
-cp -a src/ $stamp/
-cp -a templates/ $stamp/
-# cp -a test-data/ $stamp/
-
-tar cvf  $stamp.tar $stamp
-bzip2 -9 $stamp.tar
-

gsmartcontrol/data/gsmartcontrol-root.in

@@ -1,111 +0,0 @@
-#!/bin/bash
-############################################################################
-# Copyright:
-#      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
-# License: See LICENSE_zlib.txt file
-############################################################################
-
-# Run gsmartcontrol with root, asking for root password first.
-
-EXEC_BIN="@prefix@/bin/gsmartcontrol";
-prog_name="gsmartcontrol"
-
-DESKTOP="$1";
-
-# This works for --help too
-if [ "$DESKTOP" = "" ]; then
-	DESKTOP="auto";  # default
-
-elif [ "$DESKTOP" != "auto" ] && [ "$DESKTOP" != "kde" ] && \
-		[ "$DESKTOP" != "gnome" ] && [ "$DESKTOP" != "other" ]; then
-	echo "Usage: $0 [<auto|kde|gnome|other> [<${prog_name}_options>] ]";
-	exit 1;
-fi
-shift;  # remove $1
-
-
-# Auto-detect current desktop if auto was specified.
-if [ "$DESKTOP" = "auto" ]; then
-	# KDE_SESSION_UID is present on kde3 and kde4.
-	# Note that it may be empty (but still set)
-	if [ "${KDE_SESSION_UID+set}" = "set" ]; then
-		DESKTOP="kde";
-	# same with gnome
-	elif [ "${GNOME_DESKTOP_SESSION_ID+set}" = "set" ]; then
-		DESKTOP="gnome";
-	else
-		DESKTOP="other";
-	fi
-fi
-
-# echo $DESKTOP;
-
-
-# They're basically the same, only the order is different.
-# sux requires xterm to ask for the password.
-# xdg-su is basically like this script, except worse :)
-gnome_sus="gnomesu gksu kdesu xdg-su sux";
-kde_sus="kdesu gnomesu gksu xdg-su sux";
-other_sus="$gnome_sus";
-
-
-candidates="";
-found_su=""
-
-if [ "$DESKTOP" = "gnome" ]; then
-	candidates="$gnome_sus";
-elif [ "$DESKTOP" = "kde" ]; then
-	candidates="$kde_sus";
-elif [ "$DESKTOP" = "other" ]; then
-	candidates="$other_sus";
-fi
-
-for subin in $candidates; do
-	which $subin &>/dev/null
-	if [ $? -eq 0 ]; then
-		found_su="$subin";
-		break;
-	fi
-done
-
-if [ "$found_su" = "" ]; then
-	xmessage "Error launching ${prog_name}: No suitable su mechanism found.
-Try installing kdesu, gnomesu, gksu or sux first.";
-	exit 1;
-fi
-
-
-# gnomesu and gksu (but not kdesu, not sure about others) fail to adopt
-# root's PATH. Since the user's PATH may not contain /usr/sbin (with smartctl)
-# on some distributions (e.g. mandriva), add it manually. We also add
-# /usr/local/sbin, since that's the default location of custom-compiled smartctl.
-# Add these directories _before_ existing PATH, so that the user is not
-# tricked into running it from some other path (we're running as root with
-# the user's env after all).
-export PATH="/usr/sbin:/usr/local/sbin:$PATH"
-
-
-# echo $found_su;
-
-# Examples:
-# gnomesu -c 'gsmartcontrol --no-scan'
-# kdesu -c 'gsmartcontrol --no-scan'
-# xterm -e sux -c 'gsmartcontrol --no-scan'  # sux asks for password in a terminal
-
-full_cmd=""
-if [ "$found_su" = "sux" ]; then
-	full_cmd="xterm -e sux -c '$EXEC_BIN $@'"
-
-elif [ "$found_su" = "gksu" ]; then
-	full_cmd="$found_su '$EXEC_BIN $@'"
-
-else  # gnomesu, kdesu, xdg-su
-	full_cmd="$found_su -c '$EXEC_BIN $@'"
-fi
-
-
-eval $full_cmd
-
-
-
-

gsmartcontrol/data/nsis/distribution.txt.in

@@ -1,28 +0,0 @@
-
-GSmartControl - Hard disk drive health inspection tool
-Version @VERSION@
-
-The latest version of this distribution, as well as the source code of
-GSmartControl, can be found at
-http://gsmartcontrol.berlios.de
-and
-http://developer.berlios.de/project/showfiles.php?group_id=10075
-
-You need GTK+ for Windows Runtime package to use this program. You can get one
-at http://gtk-win.sf.net (you must download at least version 2.14.4-2008-11-11
-of gtk2-runtime).
-
-
-This distribution includes:
-
-* GSmartControl binary (gsmartcontrol.exe) and associated resources. The
-binary was compiled for 32-bit Windows, and should work on both 32-bit and
-64-bit Windows.
-
-* Gtkmm (http://www.gtkmm.org/) dlls.
-
-* PCRE (http://www.pcre.org/) dll.
-
-* Smartctl binaries - smartctl.exe (compiled without console output),
-smartctl_console.exe (compiled with console output), version 5.38.
-http://smartmontools.sf.net/ .

gsmartcontrol/data/nsis/gsmartcontrol.nsi.in

@@ -1,293 +0,0 @@
-
-; NSIS2 Script
-; Compatible with NSIS 2.40
-
-
-!define PRODUCT_VERSION "@VERSION@"
-!define PRODUCT_NAME "GSmartControl"
-!define PRODUCT_NAME_SMALL "gsmartcontrol"
-!define PRODUCT_PUBLISHER "Alexander Shaduri"
-!define PRODUCT_WEB_SITE "http://gsmartcontrol.berlios.de"
-
-;!define PRODUCT_DIR_REGKEY "Software\Microsoft\Windows\CurrentVersion\App Paths\AppMainExe.exe"
-!define PRODUCT_UNINST_KEY "Software\Microsoft\Windows\CurrentVersion\Uninstall\${PRODUCT_NAME}"
-!define PRODUCT_UNINST_ROOT_KEY "HKLM"
-
-!define REGISTRY_APP_PATHS "Software\Microsoft\Windows\CurrentVersion\App Paths"
-
-
-
-
-; --------------- General Settings
-
-
-; This compressor gives us the best results
-SetCompressor /SOLID lzma
-
-; Do a CRC check before installing
-CRCCheck On
-
-; This is used in titles
-Name "${PRODUCT_NAME}"  ;  ${PRODUCT_VERSION}
-
-; Output File Name
-OutFile "${PRODUCT_NAME_SMALL}-${PRODUCT_VERSION}.exe"
-
-
-
-;The Default Installation Directory
-; try to install to the same directory as runtime.
-InstallDir "$PROGRAMFILES\${PRODUCT_NAME_SMALL}"
-; If already installed, try here
-InstallDirRegKey HKLM "SOFTWARE\${PRODUCT_NAME}" "InstallationDirectory"
-
-
-ShowInstDetails show
-ShowUnInstDetails show
-
-
-
-
-
-; --------------------- MUI INTERFACE
-
-; MUI 2.0 compatible install
-!include "MUI2.nsh"
-
-;Backgound Colors. uncomment to enable fullscreen.
-; BGGradient 0000FF 000000 FFFFFF
-
-; MUI Settings
-!define MUI_ABORTWARNING
-!define MUI_ICON "nsi_install.ico"
-!define MUI_UNICON "nsi_uninstall.ico"
-
-
-;Things that need to be extracted on first (keep these lines before any File command!)
-;Only useful for BZIP2 compression
-!insertmacro MUI_RESERVEFILE_LANGDLL
-;!insertmacro MUI_RESERVEFILE_INSTALLOPTIONS
-
-
-; Language Selection Dialog Settings
-!define MUI_LANGDLL_REGISTRY_ROOT "${PRODUCT_UNINST_ROOT_KEY}"
-!define MUI_LANGDLL_REGISTRY_KEY "${PRODUCT_UNINST_KEY}"
-!define MUI_LANGDLL_REGISTRY_VALUENAME "NSIS:Language"
-
-
-; Pages to show during installation
-!insertmacro MUI_PAGE_WELCOME
-!insertmacro MUI_PAGE_LICENSE "doc\distribution.txt"
-;!insertmacro MUI_PAGE_COMPONENTS
-!insertmacro MUI_PAGE_DIRECTORY
-!insertmacro MUI_PAGE_INSTFILES
-
-;!define MUI_FINISHPAGE_RUN "$INSTDIR\gsmartcontrol.exe"
-;!define MUI_FINISHPAGE_SHOWREADME "$INSTDIR\Example.file"
-;!define MUI_FINISHPAGE_RUN_NOTCHECKED
-!define MUI_FINISHPAGE_NOAUTOCLOSE
-!define MUI_FINISHPAGE_NOREBOOTSUPPORT
-!insertmacro MUI_PAGE_FINISH
-
-
-
-; Uninstaller page
-!insertmacro MUI_UNPAGE_CONFIRM
-!insertmacro MUI_UNPAGE_INSTFILES
-
-
-
-; Language files
-!insertmacro MUI_LANGUAGE "English"
-
-
-; --------------- END MUI
-
-LangString TEXT_IO_TITLE ${LANG_ENGLISH} "GSmartControl"
-
-
-
-; --------------- START INSTALLATION
-
-
-Function .onInit
-
-  !insertmacro MUI_LANGDLL_DISPLAY
-
-  Push 2 ;F ;22 = number of languages, F = change font
-
-  ;Language selection
-  LangDLL::LangDialog "Installer Language" "Please select a language."
-
-  Pop $LANGUAGE
-  StrCmp $LANGUAGE "cancel" 0 +2
-  Abort
-
-    ; detect previous installation
-	ReadRegStr $R0 HKLM "${PRODUCT_UNINST_KEY}" "UninstallString"
-	StrCmp $R0 "" no_prev
-
-	MessageBox MB_OKCANCEL|MB_ICONEXCLAMATION \
-		"${PRODUCT_NAME} is already installed. $\n$\nClick 'OK' to remove the \
-		previous version or 'Cancel' to continue anyway." \
-		IDOK uninst_product
-		; Abort
-	goto no_prev ; if cancel was pressed, continue as if no old installation.
-
-    ;Run the uninstaller
-    uninst_product:
-    ClearErrors
-    ExecWait '$R0 _?=$INSTDIR'  ;Do not copy the uninstaller to a temp file
-
-    IfErrors cannot_uninst_product
-
-    ;You can either use Delete /REBOOTOK in the uninstaller or add some code
-    ;here to remove the uninstaller. Use a registry key to check
-    ;whether the user has chosen to uninstall. If you are using an uninstaller
-    ;components page, make sure all sections are uninstalled.
-    cannot_uninst_product:
-
-    no_prev: ; no old installation found, all ok
-
-
-
-
-	; detect GTK installation (any of available versions)
-	ReadRegStr $R0 HKLM "SOFTWARE\GTK\2.0" "DllPath"
-	StrCmp $R0 "" no_gtk
-
-	goto have_gtk
-
-	no_gtk:
-	MessageBox MB_OKCANCEL|MB_ICONEXCLAMATION \
-	"GTK2-Runtime is not installed. This product needs it to function properly.$\n\
-	Please install GTK2-Runtime from http://gtk-win.sf.net/ first.$\n$\n\
-	Click 'Cancel' to abort the installation \
-	or 'OK' to continue anyway." \
-	IDOK have_gtk
-	Abort
-
-	have_gtk:
-	; do nothing
-
-
-
-FunctionEnd
-
-
-
-
-; ----------------- INSTALLATINO TYPES
-
-; InstType "Recommended"
-InstType "Full"
-;InstType "Minimal"
-
-
-
-
-
-
-Section "Main" SecMain
-SectionIn 1
-  SetOutPath "$INSTDIR"
-
-  SetOverwrite Off ; don't overwrite the config file
-;  File "gsmartcontrol.conf"
-
-  SetOverwrite On
-  File gsmartcontrol.exe
-  File gsmartcontrol.ico
-  File icon_*.png
-  File *.dll
-  File smartctl.exe
-  File smartctl_console.exe
-
-  File /r doc
-
-  ; set a special path for this exe, as GTK may not be in a global path.
-  ReadRegStr $R3 HKLM "SOFTWARE\GTK\2.0" "DllPath"
-  WriteRegStr HKLM "${REGISTRY_APP_PATHS}\gsmartcontrol.exe" "Path" "$R3"
-
-  ;Add Shortcuts
-  CreateShortCut "$SMPROGRAMS\GSmartControl.lnk" "$INSTDIR\gsmartcontrol.exe" "" "$INSTDIR\gsmartcontrol.ico" 0
-
-SectionEnd
-
-
-
-; ------------------ POST INSTALL
-
-
-!define TEMP $R0
-
-Section -post
-
-  WriteRegStr HKLM "SOFTWARE\${PRODUCT_NAME}" "InstallationDirectory" "$INSTDIR"
-  WriteRegStr HKLM "SOFTWARE\${PRODUCT_NAME}" "Vendor" "Alexander Shaduri"
-
-  WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "DisplayName" "${PRODUCT_NAME}"
-  WriteRegStr HKLM "${PRODUCT_UNINST_KEY}" "UninstallString" "$INSTDIR\gsmartcontrol_uninst.exe"
-
-  ; We don't need this, MUI takes care for us
-  WriteRegStr HKCU "Software\${PRODUCT_NAME}" "Installer Language" $LANGUAGE
-
-  ; uninstall shortcut
-;  CreateDirectory "$SMPROGRAMS\GSmartControl"
-;  CreateShortCut "$SMPROGRAMS\GSmartControl\Uninstall GSmartControl.lnk" "$INSTDIR\gsmartcontrol_uninst.exe" "" ""
-
-
-  ; write out uninstaller
-  WriteUninstaller "$INSTDIR\gsmartcontrol_uninst.exe"
-
-SectionEnd ; post
-
-
-
-
-
-; ---------------- UNINSTALL
-
-
-
-Function un.onUninstSuccess
-  HideWindow
-  MessageBox MB_ICONINFORMATION|MB_OK "$(^Name) was successfully removed from your computer."
-FunctionEnd
-
-
-
-
-Section Uninstall
-
-  SetAutoClose false
-
-  ; add delete commands to delete whatever files/registry keys/etc you installed here.
-  Delete "$INSTDIR\gsmartcontrol_uninst.exe"
-
-  DeleteRegKey HKLM "SOFTWARE\${PRODUCT_NAME}"
-  DeleteRegKey HKLM "${PRODUCT_UNINST_KEY}"
-
-  Delete "$INSTDIR\gsmartcontrol.exe"
-  Delete "$INSTDIR\gsmartcontrol.ico"
-  Delete "$INSTDIR\icon_*.png"
-  Delete "$INSTDIR\*.dll"
-  Delete "$INSTDIR\smartctl.exe"
-  Delete "$INSTDIR\smartctl_console.exe"
-
-  RMDir /r "$INSTDIR\doc"
-
-  RMDir "$INSTDIR"  ; only if empty
-
-  DeleteRegKey HKLM "${REGISTRY_APP_PATHS}\gsmartcontrol.exe"
-
-  Delete "$SMPROGRAMS\GSmartControl.lnk"
-;  Delete "$SMPROGRAMS\GSmartControl\Uninstall GSmartControl.lnk"
-
-
-SectionEnd ; end of uninstall section
-
-
-
-
-; eof

gsmartcontrol/debian.dist/control

@@ -1,22 +0,0 @@
-Source: gsmartcontrol
-Section: utils
-Priority: extra
-Homepage: http://gsmartcontrol.berlios.de/
-Maintainer: Alexander Shaduri <ashaduriREMOVETHIS@gmail.com>
-# technically, we don't need libglademm if gtkmm >= 2.12, but it won't get
-# into Depends if it's not needed, so let's leave it here.
-Build-Depends: debhelper (>= 5), autotools-dev,
- libpcre3-dev, libgtkmm-2.4-dev (>= 2.6.0), libglademm-2.4-dev
-Standards-Version: 3.7.3
-
-Package: gsmartcontrol
-Architecture: any
-#Depends: ${shlibs:Depends}, ${misc:Depends}, smartmontools
-Depends: ${shlibs:Depends}, smartmontools
-Description: Hard disk drive health inspection tool
- GSmartControl is a graphical user interface for smartctl (from smartmontools
- package, see http://smartmontools.sourceforge.net), which is a tool for
- querying and controlling SMART (Self-Monitoring, Analysis, and Reporting
- Technology) data on modern hard disk drives. It allows you to inspect the
- drive's SMART data to determine its health, as well as run various tests on
- it.

gsmartcontrol/gsmartcontrol.spec.in

@@ -1,148 +0,0 @@
-Name:		gsmartcontrol
-Version:	@VERSION@
-Release:	1as
-License:	GPLv2, GPLv3
-Url:		http://gsmartcontrol.berlios.de
-Vendor:		Alexander Shaduri <ashaduri 'at' gmail.com>
-Packager:	Alexander Shaduri <ashaduri 'at' gmail.com>
-Source:		gsmartcontrol-%{version}.tar.bz2
-BuildRoot:	%{_tmppath}/%{name}-%{version}-build
-Summary:	GSmartControl - Hard Disk Health Inspection Tool
-
-%if 0%{?mandriva_version}
-Group:		System/Kernel and hardware
-%else
-Group:		Hardware/Other
-%endif
-
-# Support build service rpmlint. Disabled - the build service
-# stopped recognizing the flag for some architectures.
-# %if 0%{?opensuse_bs} && 0%{?suse_version} >= 1010
-# Support: rpmlint-bs
-# %endif
-
-
-# Dependencies for various distributions. The actual deps are:
-# smartmontools, pcre, (gtkmm2 >= 2.12 || (gtkmm2 >= 2.6.0 && libglademm >= 2.4.0))
-# (with the respective -devel packages of the libraries for build requirements).
-# For non-specified distributions we don't specify any dependencies to avoid errors.
-
-# For mandriva, these contain the su programs.
-# Suggests:	libgnomesu, gksu, kdebase-progs
-
-
-# SUSE / OpenSUSE. SLES also defines the correct suse_version.
-%if 0%{?suse_version}
-
-%if 0%{?%suse_version} >= 1030
-Requires: smartmontools, pcre, gtkmm2 >= 2.12.0
-BuildRequires: gcc-c++, libstdc++-devel, pcre-devel, gtkmm2-devel >= 2.12.0
-%else
-Requires: smartmontools, pcre, gtkmm2 >= 2.6.0, libglademm >= 2.4.0
-BuildRequires: gcc-c++, libstdc++-devel, pcre-devel, gtkmm2-devel >= 2.6.0, libglademm-devel >= 2.4.0
-%endif
-
-%endif
-
-
-# Fedora, CentOS, RHEL
-%if 0%{?fedora_version} || 0%{?rhel_version} || 0%{?centos_version}
-
-# I'm not sure about centos and rhel versions
-%if 0%{?fedora_version} >= 8 || 0%{?rhel_version} >= 600 || 0%{?centos_version} >= 600
-Requires: smartmontools, pcre, gtkmm24 >= 2.12.0
-BuildRequires: gcc-c++, pcre-devel, gtkmm24-devel >= 2.12.0
-%else
-Requires: smartmontools, pcre, gtkmm24 >= 2.6.0, libglademm24 >= 2.4.0
-BuildRequires: gcc-c++, pcre-devel, gtkmm24-devel >= 2.6.0, libglademm24-devel >= 2.4.0
-%endif
-
-%endif
-
-
-# Mandriva. Check the latest official spec file at
-# http://svn.mandriva.com/cgi-bin/viewvc.cgi/packages/cooker/gsmartcontrol/current/
-%if 0%{?mandriva_version}
-
-%if 0%{?mandriva_version} >= 2008
-Requires: smartmontools, libpcre0, gtkmm2.4 >= 2.12.0
-BuildRequires: gcc-c++, gcc-cpp, pcre-devel, gtkmm2.4-devel >= 2.12.0, desktop-file-utils
-%else
-Requires: smartmontools, libpcre0, gtkmm2.4 >= 2.6.0, libglademm2.4 >= 2.4.0
-BuildRequires: gcc-c++, gcc-cpp, pcre-devel, gtkmm2.4-devel >= 2.6.0, libglademm2.4-devel >= 2.4.0, desktop-file-utils
-%endif
-
-%endif
-
-
-%description
-GSmartControl is a graphical user interface for smartctl, which is a tool for
-querying and controlling SMART (Self-Monitoring, Analysis, and Reporting
-Technology) data in hard disk drives. It allows you to inspect the drive's
-SMART data to determine its health, as well as run various tests on it.
-
-%prep
-
-
-%setup -q
-%configure --enable-optimize-options=auto
-
-
-%build
-# Set up for parallel builds
-numprocs=`egrep -c ^cpu[0-9]+ /proc/stat || :`
-if [ "$numprocs" = "0" ]; then
-	numprocs=1
-fi
-
-make -j$numprocs
-# make
-
-
-%install
-# %makeinstall
-make DESTDIR=%buildroot install-strip
-# Remove the icon cache file "make install" generates, to avoid package conflicts.
-rm -f $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/icon-theme.cache
-
-
-%if 0%{?mandriva_version}
-desktop-file-install --vendor="" \
-	--remove-category="Application" \
-	--add-category="System" \
-	--add-category="X-MandrivaLinux-System-Configuration-Hardware;Settings;HardwareSettings" \
-	--dir $RPM_BUILD_ROOT%{_datadir}/applications $RPM_BUILD_ROOT%{_datadir}/applications/%{name}.desktop
-%endif
-
-
-%clean
-rm -rf %buildroot
-
-
-%files
-%defattr(-,root,root)
-
-%attr(0755,root,root) %{_bindir}/*
-# %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/*
-
-%doc %{_datadir}/doc/gsmartcontrol
-
-%{_datadir}/gsmartcontrol
-# %{_datadir}/gsmartcontrol/*
-%{_datadir}/applications/*.desktop
-%{_datadir}/icons/*
-%{_datadir}/pixmaps/*
-
-
-
-%changelog
-* Fri Nov 14 2008 Alexander Shaduri <ashaduri 'at' gmail.com>
-- Updated .spec file to incorporate changes from the official Mandriva package.
-
-* Mon Oct 06 2008 Alexander Shaduri <ashaduri 'at' gmail.com>
-- Updated .spec file to support OpenSUSE < 10.3, Fedora and friends,
-	Mandriva (for OpenSUSE Build Service).
-
-* Mon Sep 15 2008 Alexander Shaduri <ashaduri 'at' gmail.com>
-- Initial .spec file.
-

gsmartcontrol/src/applib/app_gtkmm_utils.cpp

@@ -1,212 +0,0 @@
-/**************************************************************************
- Copyright:
-      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
- License: See LICENSE_gsmartcontrol.txt
-***************************************************************************/
-
-#include <gtkmm.h>
-#include <gtk/gtk.h>  // gtk_* stuff
-#include <vector>
-
-#include "app_gtkmm_features.h"  // APP_GTKMM_OLD_TOOLTIPS
-
-#ifdef APP_GTKMM_OLD_TOOLTIPS
-	#include <gtk/gtk.h>  // gtk_tooltips_*
-#endif
-
-#include "app_pango_utils.h"  // app_pango_strip_markup()
-#include "app_gtkmm_utils.h"
-
-
-
-
-// Note: This works only if the column has custom widget set.
-Gtk::Widget* app_gtkmm_get_column_header(Gtk::TreeViewColumn& column)
-{
-	Gtk::Widget* w = column.get_widget();
-	Gtk::Widget* p1 = 0;
-	Gtk::Widget* p2 = 0;
-	Gtk::Widget* p3 = 0;
-
-	// move up to GtkAlignment, then GtkHBox, then GtkButton.
-	if (w && (p1 = w->get_parent()) && (p2 = p1->get_parent()) && (p3 = p2->get_parent()))
-		return p3;
-
-	return NULL;
-}
-
-
-
-// Read column header text and create a label with that text, set it as column's custom widget.
-Gtk::Widget* app_gtkmm_labelize_column(Gtk::TreeViewColumn& column)
-{
-	Gtk::Label* label = Gtk::manage(new Gtk::Label(column.get_title()));
-	label->show();
-	column.set_widget(*label);
-	return label;
-}
-
-
-
-
-// A wrapper around set_tooltip_*() for portability across different gtkmm versions.
-void app_gtkmm_set_widget_tooltip(Gtk::Widget& widget,
-		const Glib::ustring& tooltip_text, bool use_markup)
-{
-	// set_tooltip_* is available since 2.12
-#ifndef APP_GTKMM_OLD_TOOLTIPS
-	if (use_markup) {
-		widget.set_tooltip_markup(tooltip_text);
-	} else {
-		widget.set_tooltip_text(tooltip_text);
-	}
-
-#else  // use the old tooltips api
-	Gtk::Widget* toplevel = widget.get_toplevel();
-	if (toplevel && toplevel->is_toplevel()) {  // orphan widgets return themselves, so check toplevelness.
-		GtkTooltips* tooltips = static_cast<GtkTooltips*>(toplevel->get_data("window_tooltips"));
-		if (tooltips) {
-			if (use_markup) {
-				// strip markup
-				Glib::ustring stripped;
-				if (app_pango_strip_markup(tooltip_text, stripped)) {
-					gtk_tooltips_set_tip(tooltips, widget.gobj(), stripped.c_str(), "");
-				}
-
-			} else {
-				gtk_tooltips_set_tip(tooltips, widget.gobj(), tooltip_text.c_str(), "");
-			}
-		}
-	}
-#endif
-}
-
-
-
-// unset model on treeview, cross-gtkmm-version.
-void app_gtkmm_treeview_unset_model(Gtk::TreeView* treeview)
-{
-	// gtkmm's TreeView::unset_model() is since gtkmm 2.8
-	// (and there's no version info in docs), so use this instead.
-	if (treeview)
-		gtk_tree_view_set_model(treeview->gobj(), 0);
-}
-
-
-
-// unset model on combobox, cross-gtkmm-version.
-void app_gtkmm_combobox_unset_model(Gtk::ComboBox* box)
-{
-	// there's no ComboBox::unset_model() in gtkmm (huh?)
-	if (box)
-		gtk_combo_box_set_model(box->gobj(), 0);
-}
-
-
-
-
-
-
-#ifdef APP_GTKMM_OLD_TOOLTIPS
-
-namespace {
-
-	// helper function for gtkmm_set_treeview_tooltip_column()
-	inline bool app_on_treeview_motion_notify_event_tooltip(GdkEventMotion* event, Gtk::TreeView* treeview,
-			Gtk::TreeModelColumn<Glib::ustring> tooltip_column)
-	{
-		// debug_out_dump("app", DBG_FUNC_MSG << "x=" << int(event->x) << ", y=" << int(event->y) << "\n");
-
-		Gtk::TreePath path;
-		Gtk::TreeViewColumn* mouse_column = 0;
-		int cell_x = 0, cell_y = 0;
-
-		if (treeview->get_path_at_pos(static_cast<int>(event->x), static_cast<int>(event->y),
-				path, mouse_column, cell_x, cell_y)) {  // returns true if we're on a cell
-			app_gtkmm_set_widget_tooltip(*treeview, (*(treeview->get_model()->get_iter(path)))[tooltip_column], true);
-		}
-
-		return false;  // continue handling (no conflicts there?)
-	}
-
-
-	// helper function for gtkmm_set_iconview_tooltip_column()
-	inline bool app_on_iconview_motion_notify_event_tooltip(GdkEventMotion* event, Gtk::IconView* iconview,
-			Gtk::TreeModelColumn<Glib::ustring> tooltip_column, Glib::RefPtr<Gtk::ListStore> model)
-	{
-		// debug_out_dump("app", DBG_FUNC_MSG << "x=" << int(event->x) << ", y=" << int(event->y) << "\n");
-
-		// don't use get_item_at_pos() - it's not available in gtkmm < 2.8.
-		Gtk::TreePath tpath = iconview->get_path_at_pos(static_cast<int>(event->x), static_cast<int>(event->y));
-		if (tpath.gobj() && !tpath.empty()) {  // without gobj() check gtkmm 2.6 (but not 2.12) prints lots of errors
-			// somehow, getting model from iconview doesn't work (segfault).
-			// Glib::RefPtr<Gtk::TreeModel> model = iconview->get_model();
-			if (tpath.gobj())
-				app_gtkmm_set_widget_tooltip(*iconview, (*(model->get_iter(tpath)))[tooltip_column], true);
-		}
-
-		return false;  // continue handling (no conflicts there?)
-	}
-
-}
-
-#endif
-
-
-
-void gtkmm_set_treeview_tooltip_column(Gtk::TreeView* treeview,
-		Gtk::TreeModelColumn<Glib::ustring>& col_tooltip)
-{
-	if (!treeview)
-		return;
-
-#ifndef APP_GTKMM_OLD_TOOLTIPS
-	treeview->set_tooltip_column(col_tooltip.index());  // gtkmm has only index-based api here
-
-#else  // manually set tooltips when hovering over cells
-	treeview->signal_motion_notify_event().connect(  // connect before other events, or we'll get some screwed event data
-			sigc::bind(sigc::bind(sigc::ptr_fun(&app_on_treeview_motion_notify_event_tooltip), col_tooltip), treeview), false);
-#endif
-}
-
-
-
-void gtkmm_set_iconview_tooltip_column(Gtk::IconView* iconview,
-		Gtk::TreeModelColumn<Glib::ustring>& col_tooltip, Glib::RefPtr<Gtk::ListStore> model)
-{
-	if (!iconview)
-		return;
-
-#ifndef APP_GTKMM_OLD_TOOLTIPS
-	iconview->set_tooltip_column(col_tooltip.index());  // gtkmm has only index-based api here
-
-#else  // manually set tooltips when hovering over cells
-	iconview->signal_motion_notify_event().connect(  // connect before other events, or we'll get some screwed event data
-			sigc::bind(sigc::bind(sigc::bind(sigc::ptr_fun(&app_on_iconview_motion_notify_event_tooltip), model), col_tooltip), iconview), false);
-#endif
-}
-
-
-
-
-bool app_gtkmm_icon_theme_has_icon(Glib::RefPtr<Gtk::IconTheme> theme,
-		const Glib::ustring& icon_name, int size)
-{
-	if (!theme || !theme->has_icon(icon_name))  // check if it exists first, or exception may be thrown.
-		return false;
-
-	std::vector<int> sizes = theme->get_icon_sizes(icon_name);
-
-	for (std::vector<int>::const_iterator iter = sizes.begin(); iter != sizes.end(); ++iter) {
-		if (*iter == size || *iter == -1)  // -1 means scalable
-			return true;
-	}
-
-	return false;
-}
-
-
-
-
-
-

gsmartcontrol/src/applib/app_gtkmm_utils.h

@@ -1,97 +0,0 @@
-/**************************************************************************
- Copyright:
-      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
- License: See LICENSE_gsmartcontrol.txt
-***************************************************************************/
-
-#ifndef APP_GTKMM_UTILS_H
-#define APP_GTKMM_UTILS_H
-
-#include <string>
-#include <gtkmm/widget.h>
-#include <gtkmm/treeviewcolumn.h>
-#include <gtkmm/treemodelcolumn.h>
-#include <gtkmm/treeview.h>
-#include <gtkmm/combobox.h>
-#include <gtkmm/cellrenderertext.h>
-#include <gtkmm/iconview.h>
-#include <gtkmm/liststore.h>
-#include <gtkmm/icontheme.h>  // must include (even if gtkmm.h is included) for older gtkmm (at least 2.6, but not 2.12)
-
-#include "hz/down_cast.h"
-
-
-
-// Note: This works only if the column has custom widget set.
-Gtk::Widget* app_gtkmm_get_column_header(Gtk::TreeViewColumn& column);
-
-
-// Read column header text and create a label with that text, set it as column's custom widget.
-Gtk::Widget* app_gtkmm_labelize_column(Gtk::TreeViewColumn& column);
-
-
-// unset model on treeview, cross-gtkmm-version.
-void app_gtkmm_treeview_unset_model(Gtk::TreeView* treeview);
-
-
-// unset model on combobox (there's no straight way to do it in gtkmm, I think)
-void app_gtkmm_combobox_unset_model(Gtk::ComboBox* box);
-
-
-// A wrapper around set_tooltip_*() for portability across different gtkmm versions.
-void app_gtkmm_set_widget_tooltip(Gtk::Widget& widget,
-		const Glib::ustring& tooltip_text, bool use_markup = false);
-
-
-// A portable wrapper around TreeView::set_tooltip_column().
-void gtkmm_set_treeview_tooltip_column(Gtk::TreeView* treeview,
-		Gtk::TreeModelColumn<Glib::ustring>& col_tooltip);
-
-// A portable wrapper around IconView::set_tooltip_column().
-void gtkmm_set_iconview_tooltip_column(Gtk::IconView* iconview,
-		Gtk::TreeModelColumn<Glib::ustring>& col_tooltip, Glib::RefPtr<Gtk::ListStore> model);
-
-
-
-// Convenience function for creating a TreeViewColumn .
-template<typename T> inline
-int app_gtkmm_create_tree_view_column(Gtk::TreeModelColumn<T>& mcol, Gtk::TreeView& treeview,
-		const Glib::ustring& title, const Glib::ustring& tooltip_text, bool sortable = false, bool cell_markup = false)
-{
-		int num_tree_cols = treeview.append_column(title, mcol);
-		Gtk::TreeViewColumn* tcol = treeview.get_column(num_tree_cols - 1);
-		if (tcol) {
-			if (sortable)
-				tcol->set_sort_column(mcol);
-
-			app_gtkmm_labelize_column(*tcol);
-			tcol->set_reorderable(true);
-			tcol->set_resizable(true);
-		}
-
-		Gtk::Widget* header = app_gtkmm_get_column_header(*tcol);
-		if (header)
-			app_gtkmm_set_widget_tooltip(*header, tooltip_text);
-
-		if (cell_markup) {
-			Gtk::CellRendererText* cr_type = hz::down_cast<Gtk::CellRendererText*>(treeview.get_column_cell_renderer(num_tree_cols - 1));
-			if (cr_type) {  // may not be true if it's not Text (unless static_cast is used, in which case we're screwed)
-				treeview.get_column(num_tree_cols - 1)->clear_attributes(*cr_type);  // clear "text" attribute. "markup" won't work without this.
-				treeview.get_column(num_tree_cols - 1)->add_attribute(cr_type->property_markup(), mcol);  // render col_type as markup.
-			}
-		}
-
-		return num_tree_cols;
-}
-
-
-
-bool app_gtkmm_icon_theme_has_icon(Glib::RefPtr<Gtk::IconTheme> theme,
-		const Glib::ustring& icon_name, int size);
-
-
-
-
-
-
-#endif

gsmartcontrol/src/applib/app_ui_res_utils.h

@@ -1,402 +0,0 @@
-/**************************************************************************
- Copyright:
-      (C) 2008  Alexander Shaduri <ashaduri 'at' gmail.com>
- License: See LICENSE_gsmartcontrol.txt
-***************************************************************************/
-
-#ifndef APP_UI_RES_UTILS_H
-#define APP_UI_RES_UTILS_H
-
-#include <string>
-#include <gtkmm/window.h>
-
-#include "hz/hz_config.h"  // feature test macros (ENABLE_*)
-
-#if defined ENABLE_LIBGLADE
-	#include <libglademm.h>
-#elif defined ENABLE_GTKBUILDER
-	#include <gtkmm/builder.h>
-#endif
-
-#if GLIBMM_EXCEPTIONS_ENABLED
-	#include <memory>  // std::auto_ptr
-#endif
-
-#include "app_gtkmm_features.h"  // APP_GTKMM_OLD_TOOLTIPS
-
-#ifdef APP_GTKMM_OLD_TOOLTIPS
-	#include <gtk/gtk.h>  // gtk_tooltips_*
-#endif
-
-#include "hz/debug.h"
-#include "hz/instance_manager.h"
-#include "hz/down_cast.h"
-#include "hz/res_data.h"
-
-#include "gui_utils.h"  // gui_show_error_dialog
-
-
-
-// Use these in window class definitions to declare ui resources.
-// E.g. HZ_RES_DATA_INIT(main_window) will search for
-// main_window.glade or main_window.ui (depending on whether
-// you're using libglade or gtkbuilder) in data file search paths.
-// Or, if you're using compiled-in buffers, it will make them available.
-
-
-#if defined ENABLE_LIBGLADE
-
-	#define APP_UI_RES_DATA_INIT(res_name) \
-		HZ_RES_DATA_INIT_NAMED(res_name##_ui, #res_name ".glade", UIResDataBase); \
-		struct UIResData : public UIResDataBase { \
-			UIResData() \
-			{ \
-				UIResDataBase::root_name = #res_name;  /* we need original name here, not with _ui */ \
-			} \
-		}
-
-
-#elif defined ENABLE_GTKBUILDER
-
-	#define APP_UI_RES_DATA_INIT(res_name) \
-		HZ_RES_DATA_INIT_NAMED(res_name##_ui, #res_name ".ui", UIResDataBase); \
-		struct UIResData : public UIResDataBase { \
-			UIResData() \
-			{ \
-				UIResDataBase::root_name = #res_name;  /* we need original name here, not with _ui */ \
-			} \
-		}
-
-
-#else  // none, just avoid errors
-
-	#define APP_UI_RES_DATA_INIT(res_name) \
-		HZ_RES_DATA_DUMMY_INIT_NAMED(res_name##_ui, 0, UIResDataBase); \
-		struct UIResData : public UIResDataBase { \
-			UIResData() \
-			{ \
-				UIResDataBase::root_name = #res_name;  /* we need original name here, not with _ui */ \
-			} \
-		}
-
-#endif
-
-
-
-
-#if defined ENABLE_LIBGLADE
-
-	typedef Glib::RefPtr<Gnome::Glade::Xml> app_ui_res_ref_t;
-
-
-	inline bool app_ui_res_create_from(app_ui_res_ref_t& ref,
-			const unsigned char* buf, unsigned int buf_size, std::string& error_msg)
-	{
-		if (!buf_size || !buf || !buf[0]) {
-			error_msg = "Cannot load data buffers.";
-			return false;
-		}
-
-	#if GLIBMM_EXCEPTIONS_ENABLED
-		try {
-			// Glib::RefPtr<Gnome::Glade::Xml> ref = Gnome::Glade::Xml::create("main_window.glade");
-			ref = Gnome::Glade::Xml::create_from_buffer(reinterpret_cast<const char*>(buf),
-					static_cast<int>(buf_size));
-		}
-		catch (Gnome::Glade::XmlError& ex) {
-			error_msg = ex.what();
-			return false;
-		}
-
-	#else
-
-		std::auto_ptr<Gnome::Glade::XmlError> error;
-		ref = Gnome::Glade::Xml::create_from_buffer(reinterpret_cast<const char*>(buf),
-				static_cast<int>(buf_size),"", "", error);
-
-		if (error.get()) {
-			error_msg = error->what();
-			return false;
-		}
-	#endif
-
-		return true;
-	}
-
-
-#elif defined ENABLE_GTKBUILDER
-
-	typedef Glib::RefPtr<Gtk::Builder> app_ui_res_ref_t;
-
-
-	inline bool app_ui_res_create_from(app_ui_res_ref_t& ref,
-			const unsigned char* buf, unsigned int buf_size, std::string& error_msg)
-	{
-		if (!buf_size || !buf || !buf[0]) {
-			error_msg = "Cannot load data buffers.";
-			return false;
-		}
-
-	#if GLIBMM_EXCEPTIONS_ENABLED
-		try {
-			// ref->add_from_file("main_window.ui");
-			ref->add_from_string(reinterpret_cast<const char*>(buf), static_cast<gsize>(buf_size));
-		}
-		catch (Gtk::BuilderError& ex) {  // the docs say Glib::MarkupError, but examples say otherwise.
-			error_msg = ex.what();
-			return false;
-		}
-
-	#else
-
-		std::auto_ptr<Glib::BuilderError> error;
-		ref->add_from_string(reinterpret_cast<const char*>(buf), static_cast<gsize>(buf_size),"", "", error);
-
-		if (error.get()) {
-			error_msg = error->what();
-			return false;
-		}
-	#endif
-
-		return true;
-	}
-
-
-#else  // none, just avoid compilation errors
-
-	struct AppUIResDummy {
-		template<typename T>
-		void get_widget_derived(const Glib::ustring& name, T*& widget)
-		{ }
-		template<typename T>
-		void get_widget(const Glib::ustring& name, T*& widget)
-		{ }
-	};
-
-	typedef AppUIResDummy* app_ui_res_ref_t;
-
-	inline bool app_ui_res_create_from(app_ui_res_ref_t& ref,
-			const unsigned char* buf, unsigned int buf_size, std::string& error_msg)
-	{
-		error_msg = "Neither Gtk::Builder (gtkmm >= 2.12) nor libglademm were present during compilation."
-				" Recompile when either dependency is resolved.";
-		return false;
-	}
-
-#endif
-
-
-
-
-// These allow easy attaching of glade widget signals to member functions
-
-// Connect member function (callback) to signal signal_name on widget
-// widget_name, where widget_name is the widget's glade/gtkbuilder name.
-#define APP_UI_RES_CONNECT(ui_element, signal_name, callback) \
-	if (true) { \
-		if (!ui_element) \
-			 this->lookup_object(#ui_element, ui_element); \
-		if (ui_element) { \
-			ui_element->signal_ ## signal_name ().connect(sigc::mem_fun(*this, &self_type::callback)); \
-		} \
-	} else (void)0
-
-
-// Same as above, but default callback name to on_<widget_name>_<signal_name>.
-#define APP_UI_RES_AUTO_CONNECT(ui_element, signal_name) \
-	APP_UI_RES_CONNECT(ui_element, signal_name, on_ ## ui_element ## _ ## signal_name)
-
-
-
-
-
-// Inherit from this when using Glade-enabled windows (or any other objects).
-
-template<class Child, bool MultiInstance, class WidgetType = Gtk::Window>
-class AppUIResWidget : public WidgetType, public hz::InstanceManager<Child, MultiInstance> {
-
-	public:
-
-		typedef hz::InstanceManager<Child, MultiInstance> instance_class;
-
-#if defined ENABLE_LIBGLADE
-		friend class Gnome::Glade::Xml;  // allow construction through libglade
-#elif defined ENABLE_GTKBUILDER
-		friend class Gtk::Builder;  // allow construction through gtkbuilder
-#endif
-		friend class hz::InstanceManager<Child, MultiInstance>;  // allow construction through instance class
-
-
-		// overload parent's function because of non-trivial constructor
-		static Child* create()
-		{
-			if (hz::InstanceManager<Child, MultiInstance>::has_single_instance())  // for single-instance objects
-				return hz::InstanceManager<Child, MultiInstance>::get_single_instance();
-
-			std::string error;
-#if defined ENABLE_LIBGLADE
-			app_ui_res_ref_t ui;
-#elif defined ENABLE_GTKBUILDER
-			app_ui_res_ref_t ui = Gtk::Builder::create();
-#else  // none, just avoid compilation errors
-			app_ui_res_ref_t ui = 0;
-#endif
-			const typename Child::UIResData data;  // this holds the glade data
-
-			// this does the actual object construction
-			bool success = app_ui_res_create_from(ui, data.buf, data.size, error);
-
-			if (!success) {
-				std::string msg = "Fatal error: Cannot create UI-resource widgets: " + error;
-				debug_out_fatal("app", msg << "\n");
-				gui_show_error_dialog(msg);
-				return 0;
-			}
-
-			Child* o = 0;
-			ui->get_widget_derived(data.root_name, o);
-
-			if (!o) {
-				std::string msg = "Fatal error: Cannot get root widget from UI-resource-created hierarchy.";
-				debug_out_fatal("app", msg << "\n");
-				gui_show_error_dialog(msg);
-				return 0;
-			}
-
-			o->obj_create();
-
-			hz::InstanceManager<Child, MultiInstance>::set_single_instance(o);  // for single-instance objects
-
-			return o;
-		}
-
-
-
-		app_ui_res_ref_t get_ui()
-		{
-			return ref_ui_;
-		}
-
-
-
-		Gtk::Widget* lookup_widget(const Glib::ustring& name)
-		{
-			return lookup_widget<Gtk::Widget*>(name);
-		}
-
-		template<typename WidgetPtr>
-		WidgetPtr lookup_widget(const Glib::ustring& name)
-		{
-			WidgetPtr w = 0;
-			return lookup_widget(name, w);
-		}
-
-		template<typename WidgetPtr>
-		WidgetPtr lookup_widget(const Glib::ustring& name, WidgetPtr& w)
-		{
-			ref_ui_->get_widget(name, w);
-			return w;
-		}
-
-
-		Glib::Object* lookup_object(const Glib::ustring& name)
-		{
-#if defined ENABLE_LIBGLADE
-			return static_cast<Glib::Object*>(lookup_widget(name));  // all glade objects are widgets, it's an upcast
-#elif defined ENABLE_GTKBUILDER
-			return ref_ui_->get_object(name).operator->();  // silly RefPtr doesn't have get().
-#else  // none, just avoid compilation errors
-			return 0;
-#endif
-		}
-
-		template<typename ObjectPtr>
-		ObjectPtr lookup_object(const Glib::ustring& name)
-		{
-			ObjectPtr obj = 0;
-			return lookup_object(name, obj);
-		}
-
-		template<typename ObjectPtr>
-		ObjectPtr lookup_object(const Glib::ustring& name, ObjectPtr& obj)
-		{
-			return (obj = hz::down_cast<ObjectPtr>(lookup_object(name)));  // up, then down
-		}
-
-
-
-	protected:
-
-		// This is needed by APP_GLADE_ macros
-		typedef Child self_type;
-
-
-		// protected constructor / destructor, use create() / destroy() instead of new / delete.
-
-		// glade needs this constructor in a child.
-		// BaseObjectType is a C type, defined in specific Gtk:: widget class.
-		AppUIResWidget(typename WidgetType::BaseObjectType* gtkcobj, const app_ui_res_ref_t& ref_ui)
-				: WidgetType(gtkcobj), ref_ui_(ref_ui)
-		{
-			// if gtkmm is older than 2.12, use the old tooltips API
-#ifdef APP_GTKMM_OLD_TOOLTIPS
-			// attach it to the window
-			this->create_tooltips_data(this);
-#endif
-
-
-			// manually connecting signals:
-			// this->signal_delete_event().connect(sigc::mem_fun(*this, &MainWindow::on_main_window_delete));
-
-			// signals of glade-created objects:
-			// Gtk::ToolButton* rescan_devices_toolbutton = 0;
-			// APP_UI_RES_AUTO_CONNECT(rescan_devices_toolbutton, clicked);
-
-			// show();
-		}
-
-
-		virtual ~AppUIResWidget()
-		{ }
-
-
-#ifdef APP_GTKMM_OLD_TOOLTIPS
-		// differentiate Window and its children from other widgets through overloading
-
-		void create_tooltips_data(Gtk::Window* window)
-		{
-			if (window) {
-				// gtkmm tooltips api is somewhat broken (no create?), so use gtk
-				if (!window->get_data("window_tooltips")) {
-					window->set_data("window_tooltips", gtk_tooltips_new());
-				}
-			}
-		}
-
-		void create_tooltips_data(Gtk::Object* o)
-		{ }
-#endif
-
-
-
-	protected:
-
-// 		void on_rescan_devices_toolbutton_clicked()
-// 		{
-// 		}
-
-
-	private:
-
-		app_ui_res_ref_t ref_ui_;
-
-};
-
-
-
-
-
-
-
-
-#endif